[v12,4/6] dt-bindings: irqchip: imx mu work as msi controller

Commit Message

Frank Li Sept. 22, 2022, 4:12 p.m. UTC

I.MX mu support generate irq by write a register. Provide msi controller
support so other driver such as PCI EP can use it by standard msi
interface as doorbell.

Reviewed-by: Rob Herring <[e-mail]>
Signed-off-by: Frank Li <[e-mail]>
---
 .../interrupt-controller/fsl,mu-msi.yaml      | 99 +++++++++++++++++++
 1 file changed, 99 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml

Patch

diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
new file mode 100644
index 0000000000000..799ae5c3e32ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
@@ -0,0 +1,99 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,mu-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale/NXP i.MX Messaging Unit (MU) work as msi controller
+
+maintainers:
+  - Frank Li <[e-mail]>
+
+description: |
+  The Messaging Unit module enables two processors within the SoC to
+  communicate and coordinate by passing messages (e.g. data, status
+  and control) through the MU interface. The MU also provides the ability
+  for one processor (A side) to signal the other processor (B side) using
+  interrupts.
+
+  Because the MU manages the messaging between processors, the MU uses
+  different clocks (from each side of the different peripheral buses).
+  Therefore, the MU must synchronize the accesses from one side to the
+  other. The MU accomplishes synchronization using two sets of matching
+  registers (Processor A-side, Processor B-side).
+
+  MU can work as msi interrupt controller to do doorbell
+
+allOf:
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6sx-mu-msi
+      - fsl,imx7ulp-mu-msi
+      - fsl,imx8ulp-mu-msi
+      - fsl,imx8ulp-mu-msi-s4
+
+  reg:
+    items:
+      - description: a side register base address
+      - description: b side register base address
+
+  reg-names:
+    items:
+      - const: processor-a-side
+      - const: processor-b-side
+
+  interrupts:
+    description: a side interrupt number.
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: a side power domain
+      - description: b side power domain
+
+  power-domain-names:
+    items:
+      - const: processor-a-side
+      - const: processor-b-side
+
+  interrupt-controller: true
+
+  msi-controller: true
+
+  "#msi-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - msi-controller
+  - "#msi-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    msi-controller@5d270000 {
+        compatible = "fsl,imx6sx-mu-msi";
+        msi-controller;
+        #msi-cells = <0>;
+        interrupt-controller;
+        reg = <0x5d270000 0x10000>,     /* A side */
+              <0x5d300000 0x10000>;     /* B side */
+        reg-names = "processor-a-side", "processor-b-side";
+        interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd IMX_SC_R_MU_12A>,
+                        <&pd IMX_SC_R_MU_12B>;
+        power-domain-names = "processor-a-side", "processor-b-side";
+    };