@@ -158,4 +158,15 @@ config HOTPLUG_PCI_S390
When in doubt, say Y.
+config HOTPLUG_PCI_GPIO
+ bool "GPIO based PCI Hotplug Support"
+ depends on OF_GPIO
+ help
+ Say Y here if you want to have GPIO based PCIe hot-plug framework.
+ This framework helps to register a GPIO based Hot-Plug controller
+ with the system where a GPIO can be used to represent device
+ connect and disconnect states.
+
+ When in doubt, say N.
+
endif # HOTPLUG_PCI
@@ -20,6 +20,7 @@ obj-$(CONFIG_HOTPLUG_PCI_RPA) += rpaphp.o
obj-$(CONFIG_HOTPLUG_PCI_RPA_DLPAR) += rpadlpar_io.o
obj-$(CONFIG_HOTPLUG_PCI_ACPI) += acpiphp.o
obj-$(CONFIG_HOTPLUG_PCI_S390) += s390_pci_hpc.o
+obj-$(CONFIG_HOTPLUG_PCI_GPIO) += gpio_php.o
# acpiphp_ibm extends acpiphp, so should be linked afterwards.
new file mode 100644
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * GPIO based PCI Hotplug Driver.
+ *
+ */
+
+#include <linux/libfdt.h>
+#include <linux/module.h>
+#include <linux/of_fdt.h>
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+#include "../pci.h"
+#include "../pcie/portdrv.h"
+
+#include "gpiophp.h"
+
+static DEFINE_MUTEX(slot_mutex);
+
+static inline struct gpio_hotplug_slot *to_gpio_hotplug_slot(struct hotplug_slot *slot)
+{
+ return container_of(slot, struct gpio_hotplug_slot, hotplug_slot);
+}
+
+static int gpio_hp_get_power_status(struct hotplug_slot *hotplug_slot, u8 *value)
+{
+ struct gpio_hotplug_slot *slot = to_gpio_hotplug_slot(hotplug_slot);
+ struct pci_dev *dev;
+
+ pci_config_pm_runtime_get(slot->pdev);
+ dev = pci_get_slot(slot->pdev->subordinate, PCI_DEVFN(0, 0));
+ if (dev) {
+ pci_dev_put(dev);
+ *value = 1;
+ } else {
+ *value = 0;
+ }
+ pci_dbg(slot->pdev, "Power Status = %u\n", *value);
+ pci_config_pm_runtime_put(slot->pdev);
+
+ return 0;
+}
+
+static int gpio_hp_enable_slot(struct hotplug_slot *hotplug_slot)
+{
+ struct gpio_hotplug_slot *slot = to_gpio_hotplug_slot(hotplug_slot);
+ int ret = 0;
+ u8 value;
+
+ mutex_lock(&slot_mutex);
+
+ gpio_hp_get_power_status(hotplug_slot, &value);
+ if (value) {
+ pci_info(slot->pdev, "Device is already plugged-in\n");
+ goto exit;
+ }
+
+ if (slot->plat_ops && slot->plat_ops->enable)
+ slot->plat_ops->enable(slot);
+
+ pm_runtime_get_sync(&slot->pdev->dev);
+
+ pci_lock_rescan_remove();
+ pci_rescan_bus(slot->pdev->bus);
+ pci_unlock_rescan_remove();
+
+ pm_runtime_put(&slot->pdev->dev);
+
+exit:
+ mutex_unlock(&slot_mutex);
+ return ret;
+}
+
+static int gpio_hp_disable_slot(struct hotplug_slot *hotplug_slot)
+{
+ struct gpio_hotplug_slot *slot = to_gpio_hotplug_slot(hotplug_slot);
+ struct pci_dev *dev, *temp;
+ u8 value;
+
+ mutex_lock(&slot_mutex);
+
+ gpio_hp_get_power_status(hotplug_slot, &value);
+ if (!value) {
+ pci_info(slot->pdev, "Device is already removed\n");
+ goto exit;
+ }
+
+ pci_lock_rescan_remove();
+
+ list_for_each_entry_safe_reverse(dev, temp, &slot->pdev->subordinate->devices, bus_list) {
+ pci_dev_get(dev);
+ pci_stop_and_remove_bus_device(dev);
+ pci_dev_put(dev);
+ }
+
+ pci_unlock_rescan_remove();
+
+exit:
+ if (slot->plat_ops && slot->plat_ops->disable)
+ slot->plat_ops->disable(slot);
+ mutex_unlock(&slot_mutex);
+ return 0;
+}
+
+static const struct hotplug_slot_ops gpio_hotplug_slot_ops = {
+ .enable_slot = gpio_hp_enable_slot,
+ .disable_slot = gpio_hp_disable_slot,
+ .get_power_status = gpio_hp_get_power_status,
+};
+
+static irqreturn_t pcie_gpio_hp_irq(int irq, void *arg)
+{
+ struct gpio_hotplug_slot *slot = arg;
+
+ if (gpiod_get_value(slot->gpiod)) {
+ pci_dbg(slot->pdev, "Hot-Plug Event\n");
+ gpio_hp_enable_slot(&slot->hotplug_slot);
+ } else {
+ pci_dbg(slot->pdev, "Hot-UnPlug Event\n");
+ gpio_hp_disable_slot(&slot->hotplug_slot);
+ }
+
+ return IRQ_HANDLED;
+}
+
+int register_gpio_hotplug_slot(struct gpio_hotplug_slot *slot)
+{
+ struct device *dev = &slot->pdev->dev;
+ struct pci_dev *pdev = slot->pdev;
+ struct gpio_desc *gpiod;
+ unsigned int irq;
+ char *name;
+ int ret;
+
+ gpiod = devm_gpiod_get(&pdev->bus->dev, "hotplug", GPIOD_IN);
+ if (IS_ERR(gpiod)) {
+ ret = PTR_ERR(gpiod);
+ pci_err(pdev, "Failed to find GPIO for Hot-Plug functionality: %d\n", ret);
+ return ret;
+ }
+
+ ret = gpiod_to_irq(gpiod);
+ if (ret < 0) {
+ pci_err(pdev, "Failed to get IRQ for Hot_Plug GPIO: %d\n", ret);
+ return ret;
+ }
+ irq = (unsigned int)ret;
+
+ slot->gpiod = gpiod;
+ slot->hotplug_slot.ops = &gpio_hotplug_slot_ops;
+ slot->irq = irq;
+
+ name = devm_kasprintf(dev, GFP_KERNEL, "slot_%u", slot->slot_nr);
+ if (!name) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+
+ ret = pci_hp_register(&slot->hotplug_slot, pdev->subordinate, 0, name);
+ if (ret) {
+ pci_err(pdev, "Failed to register hotplug slot: %d\n", ret);
+ goto exit;
+ }
+
+ name = devm_kasprintf(dev, GFP_KERNEL, "pcie_gpio_hp_irq_%u", slot->slot_nr);
+ if (!name) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+
+ ret = devm_request_threaded_irq(dev, slot->irq,
+ NULL, pcie_gpio_hp_irq,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ name, slot);
+ if (ret < 0) {
+ pci_err(pdev, "Failed to request IRQ for Hot-Plug: %d\n", ret);
+ goto exit;
+ }
+
+ pci_dbg(pdev, "Hot-Plug Slot registered for %s\n", pci_name(pdev));
+
+ gpio_hp_enable_slot(&slot->hotplug_slot);
+
+ return 0;
+
+exit:
+ return ret;
+}
+
+void unregister_gpio_hotplug_slot(struct gpio_hotplug_slot *slot)
+{
+ struct device *dev = &slot->pdev->dev;
+ struct pci_dev *pdev = slot->pdev;
+
+ gpio_hp_disable_slot(&slot->hotplug_slot);
+ devm_free_irq(dev, slot->irq, slot);
+ pci_hp_deregister(&slot->hotplug_slot);
+ devm_gpiod_put(&pdev->bus->dev, slot->gpiod);
+}
+
new file mode 100644
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * GPIO based PCI Hotplug Driver.
+ *
+ */
+
+#ifndef _GPIOPHP_H
+#define _GPIOPHP_H
+
+#include <linux/pci_hotplug.h>
+
+struct gpio_hotplug_slot;
+
+struct gpio_hotplug_slot_plat_ops {
+ int (*enable)(struct gpio_hotplug_slot *hp_slot);
+ int (*disable)(struct gpio_hotplug_slot *hp_slot);
+};
+
+struct gpio_hotplug_slot {
+ struct device_node *np;
+ int slot_nr;
+ const struct gpio_hotplug_slot_plat_ops *plat_ops;
+ struct pci_dev *pdev;
+
+ struct gpio_desc *gpiod;
+ unsigned int irq;
+
+ struct hotplug_slot hotplug_slot;
+};
+
+#ifdef CONFIG_HOTPLUG_PCI_GPIO
+int register_gpio_hotplug_slot(struct gpio_hotplug_slot *hp_slot);
+void unregister_gpio_hotplug_slot(struct gpio_hotplug_slot *hp_slot);
+#else
+static inline int register_gpio_hotplug_slot(struct gpio_hotplug_slot *hp_slot)
+{ return 0; }
+static inline void unregister_gpio_hotplug_slot(struct gpio_hotplug_slot *hp_slot) {}
+#endif
+
+#endif //_GPIOPHP_H
This adds a standalone driver to support PCIe hotplug functionality merely based on a GPIO indicating the status of a downstream device connectivity. It looks for "hotplug-gpios" property in the corresponding device node to get the GPIO information. It also provides a mechanism for platform drivers of the controllers to register ops to perform any platform specific operations while enabling/disabling the slots. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> --- drivers/pci/hotplug/Kconfig | 11 ++ drivers/pci/hotplug/Makefile | 1 + drivers/pci/hotplug/gpio_php.c | 200 +++++++++++++++++++++++++++++++++ drivers/pci/hotplug/gpiophp.h | 40 +++++++ 4 files changed, 252 insertions(+) create mode 100644 drivers/pci/hotplug/gpio_php.c create mode 100644 drivers/pci/hotplug/gpiophp.h