[v2,6/9] PCI: microchip: Re-partition code between probe() and init()

Commit Message

Daire McNamara Dec. 21, 2022, 4:26 p.m. UTC

From: Daire McNamara <[e-mail]>

Continuing to use pci_host_common_probe() for the PCIe Root Complex on
PolarFire SoC was leading to an extremely large _init() function and
some unnatural code flow. Re-partition so some tasks are done in
a _probe() routine, which calls pci_host_common_probe() and then use a
much smaller _init() function, mainly to enable interrupts after address
translation tables are set up.

Signed-off-by: Daire McNamara <[e-mail]>
Reviewed-by: Conor Dooley <[e-mail]>
---
 drivers/pci/controller/pcie-microchip-host.c | 55 ++++++++++++++------
 1 file changed, 38 insertions(+), 17 deletions(-)

Patch

diff --git a/drivers/pci/controller/pcie-microchip-host.c b/drivers/pci/controller/pcie-microchip-host.c
index 5fe282d04e81..2ba96d7f9095 100644
--- a/drivers/pci/controller/pcie-microchip-host.c
+++ b/drivers/pci/controller/pcie-microchip-host.c
@@ -383,6 +383,8 @@  static struct {
 
 static char poss_clks[][5] = { "fic0", "fic1", "fic2", "fic3" };
 
+static struct mc_pcie *port;
+
 static void mc_pcie_fixup_ecam(struct mc_pcie *port, void __iomem *ecam)
 {
 	struct mc_msi *msi = &port->msi;
@@ -1105,7 +1107,34 @@  static int mc_platform_init(struct pci_config_window *cfg)
 {
 	struct device *dev = cfg->parent;
 	struct platform_device *pdev = to_platform_device(dev);
-	struct mc_pcie *port;
+	void __iomem *bridge_base_addr =
+		port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+	int ret;
+
+	/* Configure address translation table 0 for PCIe config space */
+	mc_pcie_setup_window(bridge_base_addr, 0, cfg->res.start,
+			     cfg->res.start,
+			     resource_size(&cfg->res));
+
+	/* Need some fixups in config space */
+	mc_pcie_fixup_ecam(port, cfg->win);
+
+	/* Configure non-config space outbound ranges */
+	ret = mc_pcie_setup_windows(pdev, port);
+	if (ret)
+		return ret;
+
+	/* Address translation is up; safe to enable interrupts */
+	ret = mc_init_interrupts(pdev, port);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int mc_host_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
 	void __iomem *bridge_base_addr;
 	int ret;
 	u32 val;
@@ -1113,13 +1142,8 @@  static int mc_platform_init(struct pci_config_window *cfg)
 	port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
 	if (!port)
 		return -ENOMEM;
-	port->dev = dev;
 
-	ret = mc_pcie_init_clks(dev);
-	if (ret) {
-		dev_err(dev, "failed to get clock resources, error %d\n", ret);
-		return -ENODEV;
-	}
+	port->dev = dev;
 
 	port->axi_base_addr = devm_platform_ioremap_resource(pdev, 1);
 	if (IS_ERR(port->axi_base_addr))
@@ -1144,16 +1168,13 @@  static int mc_platform_init(struct pci_config_window *cfg)
 	/* Pick vector address from design */
 	port->msi.vector_phy = readl_relaxed(bridge_base_addr + IMSI_ADDR);
 
-	/* Configure Address Translation Table 0 for PCIe config space */
-	mc_pcie_setup_window(bridge_base_addr, 0, cfg->res.start & 0xffffffff,
-			     cfg->res.start, resource_size(&cfg->res));
-
-	ret = mc_pcie_setup_windows(pdev, port);
-	if (ret)
-		return ret;
+	ret = mc_pcie_init_clks(dev);
+	if (ret) {
+		dev_err(dev, "failed to get clock resources, error %d\n", ret);
+		return -ENODEV;
+	}
 
-	/* Address translation is up; safe to enable interrupts */
-	return mc_init_interrupts(pdev, port);
+	return pci_host_common_probe(pdev);
 }
 
 static const struct pci_ecam_ops mc_ecam_ops = {
@@ -1176,7 +1197,7 @@  static const struct of_device_id mc_pcie_of_match[] = {
 MODULE_DEVICE_TABLE(of, mc_pcie_of_match);
 
 static struct platform_driver mc_pcie_driver = {
-	.probe = pci_host_common_probe,
+	.probe = mc_host_probe,
 	.driver = {
 		.name = "microchip-pcie",
 		.of_match_table = mc_pcie_of_match,