| Message ID | 20230213144922.89982-1-manivannan.sadhasivam@linaro.org (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Krzysztof Wilczyński |
| Headers | show |
| Series | PCI: pciehp: Add Qualcomm quirk for Command Completed erratum | expand |
On Mon, Feb 13, 2023 at 08:19:22PM +0530, Manivannan Sadhasivam wrote: > The Qualcomm PCI bridge device (Device ID 0x010e) found in chipsets such as > SC8280XP used in Lenovo Thinkpad X13s, does not set the Command Completed > bit unless writes to the Slot Command register change "Control" bits. > > This results in timeouts like below during boot and resume from suspend: > > pcieport 0002:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago) > ... > pcieport 0002:00:00.0: pciehp: Timeout on hotplug command 0x13f1 (issued 107724 msec ago) > > Add the device to the Command Completed quirk to mark commands "completed" > immediately unless they change the "Control" bits. > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Applied to pci/hotplug for v6.3, thanks! > --- > > Bjorn, during the review of a similar patch adding the quirk for device id > 0x0110, you asked me whether we should mark all Qcom bridge devices as > quirky like Intel bridges. I tried asking this question to Qualcomm but > found no answer yet. So I just went with adding one more entry. > > drivers/pci/hotplug/pciehp_hpc.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c > index 10e9670eea0b..f8c70115b691 100644 > --- a/drivers/pci/hotplug/pciehp_hpc.c > +++ b/drivers/pci/hotplug/pciehp_hpc.c > @@ -1088,6 +1088,8 @@ static void quirk_cmd_compl(struct pci_dev *pdev) > } > DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, > PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl); > +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_QCOM, 0x010e, > + PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl); > DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_QCOM, 0x0110, > PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl); > DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_QCOM, 0x0400, > -- > 2.25.1 >
Hello, > The Qualcomm PCI bridge device (Device ID 0x010e) found in chipsets such as > SC8280XP used in Lenovo Thinkpad X13s, does not set the Command Completed > bit unless writes to the Slot Command register change "Control" bits. > > This results in timeouts like below during boot and resume from suspend: > > pcieport 0002:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago) > ... > pcieport 0002:00:00.0: pciehp: Timeout on hotplug command 0x13f1 (issued 107724 msec ago) > > Add the device to the Command Completed quirk to mark commands "completed" > immediately unless they change the "Control" bits. > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Applied to pci/hotplug, thank you! [1/1] PCI: pciehp: Add Qualcomm quirk for Command Completed erratum https://git.kernel.org/pci/pci/c/dc4e71ddbe8e Krzysztof
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 10e9670eea0b..f8c70115b691 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -1088,6 +1088,8 @@ static void quirk_cmd_compl(struct pci_dev *pdev) } DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl); +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_QCOM, 0x010e, + PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl); DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_QCOM, 0x0110, PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl); DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_QCOM, 0x0400,
The Qualcomm PCI bridge device (Device ID 0x010e) found in chipsets such as SC8280XP used in Lenovo Thinkpad X13s, does not set the Command Completed bit unless writes to the Slot Command register change "Control" bits. This results in timeouts like below during boot and resume from suspend: pcieport 0002:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago) ... pcieport 0002:00:00.0: pciehp: Timeout on hotplug command 0x13f1 (issued 107724 msec ago) Add the device to the Command Completed quirk to mark commands "completed" immediately unless they change the "Control" bits. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- Bjorn, during the review of a similar patch adding the quirk for device id 0x0110, you asked me whether we should mark all Qcom bridge devices as quirky like Intel bridges. I tried asking this question to Qualcomm but found no answer yet. So I just went with adding one more entry. drivers/pci/hotplug/pciehp_hpc.c | 2 ++ 1 file changed, 2 insertions(+)