| Message ID | 20230224105906.16540-9-manivannan.sadhasivam@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add PCIe RC support to Qcom SDX55 SoC | expand |
On 24.02.2023 11:59, Manivannan Sadhasivam wrote: > To align with the rest of the devicetree files and the relative properties, > let's list the values of properties such as {reg/clock/interrupt}-names > vertically. > > Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm/boot/dts/qcom-sdx55.dtsi | 23 ++++++++++++++++++----- > 1 file changed, 18 insertions(+), 5 deletions(-) > > diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi > index b411c4ae34c3..61fdd601fc26 100644 > --- a/arch/arm/boot/dts/qcom-sdx55.dtsi > +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi > @@ -393,7 +393,11 @@ pcie_ep: pcie-ep@1c00000 { > <0x40001000 0x1000>, > <0x40200000 0x100000>, > <0x01c03000 0x3000>; > - reg-names = "parf", "dbi", "elbi", "atu", "addr_space", > + reg-names = "parf", > + "dbi", > + "elbi", > + "atu", > + "addr_space", > "mmio"; > > qcom,perst-regs = <&tcsr 0xb258 0xb270>; > @@ -405,12 +409,18 @@ pcie_ep: pcie-ep@1c00000 { > <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, > <&gcc GCC_PCIE_SLEEP_CLK>, > <&gcc GCC_PCIE_0_CLKREF_CLK>; > - clock-names = "aux", "cfg", "bus_master", "bus_slave", > - "slave_q2a", "sleep", "ref"; > + clock-names = "aux", > + "cfg", > + "bus_master", > + "bus_slave", > + "slave_q2a", > + "sleep", > + "ref"; > > interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, > <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "global", "doorbell"; > + interrupt-names = "global", > + "doorbell"; > reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; > wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; > resets = <&gcc GCC_PCIE_BCR>; > @@ -434,7 +444,10 @@ pcie_phy: phy@1c07000 { > <&gcc GCC_PCIE_CFG_AHB_CLK>, > <&gcc GCC_PCIE_0_CLKREF_CLK>, > <&gcc GCC_PCIE_RCHNG_PHY_CLK>; > - clock-names = "aux", "cfg_ahb", "ref", "refgen"; > + clock-names = "aux", > + "cfg_ahb", > + "ref", > + "refgen"; > > resets = <&gcc GCC_PCIE_PHY_BCR>; > reset-names = "phy";
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi index b411c4ae34c3..61fdd601fc26 100644 --- a/arch/arm/boot/dts/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -393,7 +393,11 @@ pcie_ep: pcie-ep@1c00000 { <0x40001000 0x1000>, <0x40200000 0x100000>, <0x01c03000 0x3000>; - reg-names = "parf", "dbi", "elbi", "atu", "addr_space", + reg-names = "parf", + "dbi", + "elbi", + "atu", + "addr_space", "mmio"; qcom,perst-regs = <&tcsr 0xb258 0xb270>; @@ -405,12 +409,18 @@ pcie_ep: pcie-ep@1c00000 { <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, <&gcc GCC_PCIE_SLEEP_CLK>, <&gcc GCC_PCIE_0_CLKREF_CLK>; - clock-names = "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", "sleep", "ref"; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "sleep", + "ref"; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global", "doorbell"; + interrupt-names = "global", + "doorbell"; reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; resets = <&gcc GCC_PCIE_BCR>; @@ -434,7 +444,10 @@ pcie_phy: phy@1c07000 { <&gcc GCC_PCIE_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_CLKREF_CLK>, <&gcc GCC_PCIE_RCHNG_PHY_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen"; resets = <&gcc GCC_PCIE_PHY_BCR>; reset-names = "phy";
To align with the rest of the devicetree files and the relative properties, let's list the values of properties such as {reg/clock/interrupt}-names vertically. Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- arch/arm/boot/dts/qcom-sdx55.dtsi | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-)