@@ -176,22 +176,13 @@ struct qcom_pcie_resources_2_3_3 {
struct reset_control_bulk_data rst[QCOM_PCIE_2_3_3_MAX_RESETS];
};
-#define QCOM_PCIE_2_4_0_MAX_CLOCKS 4
+#define QCOM_PCIE_2_4_0_MAX_CLOCKS 4
+#define QCOM_PCIE_2_4_0_MAX_RESETS 12
struct qcom_pcie_resources_2_4_0 {
struct clk_bulk_data clks[QCOM_PCIE_2_4_0_MAX_CLOCKS];
int num_clks;
- struct reset_control *axi_m_reset;
- struct reset_control *axi_s_reset;
- struct reset_control *pipe_reset;
- struct reset_control *axi_m_vmid_reset;
- struct reset_control *axi_s_xpu_reset;
- struct reset_control *parf_reset;
- struct reset_control *phy_reset;
- struct reset_control *axi_m_sticky_reset;
- struct reset_control *pipe_sticky_reset;
- struct reset_control *pwr_reset;
- struct reset_control *ahb_reset;
- struct reset_control *phy_ahb_reset;
+ struct reset_control_bulk_data resets[QCOM_PCIE_2_4_0_MAX_RESETS];
+ int num_resets;
};
/* 6 clocks typically, 7 for sm8250 */
@@ -626,65 +617,24 @@ static int qcom_pcie_get_resources_2_4_0(struct qcom_pcie *pcie)
if (ret < 0)
return ret;
- res->axi_m_reset = devm_reset_control_get_exclusive(dev, "axi_m");
- if (IS_ERR(res->axi_m_reset))
- return PTR_ERR(res->axi_m_reset);
-
- res->axi_s_reset = devm_reset_control_get_exclusive(dev, "axi_s");
- if (IS_ERR(res->axi_s_reset))
- return PTR_ERR(res->axi_s_reset);
-
- if (is_ipq) {
- /*
- * These resources relates to the PHY or are secure clocks, but
- * are controlled here for IPQ4019
- */
- res->pipe_reset = devm_reset_control_get_exclusive(dev, "pipe");
- if (IS_ERR(res->pipe_reset))
- return PTR_ERR(res->pipe_reset);
-
- res->axi_m_vmid_reset = devm_reset_control_get_exclusive(dev,
- "axi_m_vmid");
- if (IS_ERR(res->axi_m_vmid_reset))
- return PTR_ERR(res->axi_m_vmid_reset);
-
- res->axi_s_xpu_reset = devm_reset_control_get_exclusive(dev,
- "axi_s_xpu");
- if (IS_ERR(res->axi_s_xpu_reset))
- return PTR_ERR(res->axi_s_xpu_reset);
-
- res->parf_reset = devm_reset_control_get_exclusive(dev, "parf");
- if (IS_ERR(res->parf_reset))
- return PTR_ERR(res->parf_reset);
-
- res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
- if (IS_ERR(res->phy_reset))
- return PTR_ERR(res->phy_reset);
- }
-
- res->axi_m_sticky_reset = devm_reset_control_get_exclusive(dev,
- "axi_m_sticky");
- if (IS_ERR(res->axi_m_sticky_reset))
- return PTR_ERR(res->axi_m_sticky_reset);
-
- res->pipe_sticky_reset = devm_reset_control_get_exclusive(dev,
- "pipe_sticky");
- if (IS_ERR(res->pipe_sticky_reset))
- return PTR_ERR(res->pipe_sticky_reset);
-
- res->pwr_reset = devm_reset_control_get_exclusive(dev, "pwr");
- if (IS_ERR(res->pwr_reset))
- return PTR_ERR(res->pwr_reset);
-
- res->ahb_reset = devm_reset_control_get_exclusive(dev, "ahb");
- if (IS_ERR(res->ahb_reset))
- return PTR_ERR(res->ahb_reset);
+ res->resets[0].id = "axi_m";
+ res->resets[1].id = "axi_s";
+ res->resets[2].id = "axi_m_sticky";
+ res->resets[3].id = "pipe_sticky";
+ res->resets[4].id = "pwr";
+ res->resets[5].id = "ahb";
+ res->resets[6].id = "pipe";
+ res->resets[7].id = "axi_m_vmid";
+ res->resets[8].id = "axi_s_xpu";
+ res->resets[9].id = "parf";
+ res->resets[10].id = "phy";
+ res->resets[11].id = "phy_ahb";
+
+ res->num_resets = is_ipq ? 12 : 6;
- if (is_ipq) {
- res->phy_ahb_reset = devm_reset_control_get_exclusive(dev, "phy_ahb");
- if (IS_ERR(res->phy_ahb_reset))
- return PTR_ERR(res->phy_ahb_reset);
- }
+ ret = devm_reset_control_bulk_get_exclusive(dev, res->num_resets, res->resets);
+ if (ret < 0)
+ return ret;
return 0;
}
@@ -693,15 +643,7 @@ static void qcom_pcie_deinit_2_4_0(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
- reset_control_assert(res->axi_m_reset);
- reset_control_assert(res->axi_s_reset);
- reset_control_assert(res->pipe_reset);
- reset_control_assert(res->pipe_sticky_reset);
- reset_control_assert(res->phy_reset);
- reset_control_assert(res->phy_ahb_reset);
- reset_control_assert(res->axi_m_sticky_reset);
- reset_control_assert(res->pwr_reset);
- reset_control_assert(res->ahb_reset);
+ reset_control_bulk_assert(res->num_resets, res->resets);
clk_bulk_disable_unprepare(res->num_clks, res->clks);
}
@@ -712,149 +654,29 @@ static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)
struct device *dev = pci->dev;
int ret;
- ret = reset_control_assert(res->axi_m_reset);
- if (ret) {
- dev_err(dev, "cannot assert axi master reset\n");
- return ret;
- }
-
- ret = reset_control_assert(res->axi_s_reset);
- if (ret) {
- dev_err(dev, "cannot assert axi slave reset\n");
- return ret;
- }
-
- usleep_range(10000, 12000);
-
- ret = reset_control_assert(res->pipe_reset);
- if (ret) {
- dev_err(dev, "cannot assert pipe reset\n");
- return ret;
- }
-
- ret = reset_control_assert(res->pipe_sticky_reset);
- if (ret) {
- dev_err(dev, "cannot assert pipe sticky reset\n");
- return ret;
- }
-
- ret = reset_control_assert(res->phy_reset);
- if (ret) {
- dev_err(dev, "cannot assert phy reset\n");
- return ret;
- }
-
- ret = reset_control_assert(res->phy_ahb_reset);
- if (ret) {
- dev_err(dev, "cannot assert phy ahb reset\n");
+ ret = reset_control_bulk_assert(res->num_resets, res->resets);
+ if (ret < 0) {
+ dev_err(dev, "cannot assert resets\n");
return ret;
}
usleep_range(10000, 12000);
- ret = reset_control_assert(res->axi_m_sticky_reset);
- if (ret) {
- dev_err(dev, "cannot assert axi master sticky reset\n");
- return ret;
- }
-
- ret = reset_control_assert(res->pwr_reset);
- if (ret) {
- dev_err(dev, "cannot assert power reset\n");
- return ret;
- }
-
- ret = reset_control_assert(res->ahb_reset);
- if (ret) {
- dev_err(dev, "cannot assert ahb reset\n");
+ ret = reset_control_bulk_deassert(res->num_resets, res->resets);
+ if (ret < 0) {
+ dev_err(dev, "cannot deassert resets\n");
return ret;
}
usleep_range(10000, 12000);
- ret = reset_control_deassert(res->phy_ahb_reset);
+ ret = clk_bulk_prepare_enable(res->num_clks, res->clks);
if (ret) {
- dev_err(dev, "cannot deassert phy ahb reset\n");
+ reset_control_bulk_assert(res->num_resets, res->resets);
return ret;
}
- ret = reset_control_deassert(res->phy_reset);
- if (ret) {
- dev_err(dev, "cannot deassert phy reset\n");
- goto err_rst_phy;
- }
-
- ret = reset_control_deassert(res->pipe_reset);
- if (ret) {
- dev_err(dev, "cannot deassert pipe reset\n");
- goto err_rst_pipe;
- }
-
- ret = reset_control_deassert(res->pipe_sticky_reset);
- if (ret) {
- dev_err(dev, "cannot deassert pipe sticky reset\n");
- goto err_rst_pipe_sticky;
- }
-
- usleep_range(10000, 12000);
-
- ret = reset_control_deassert(res->axi_m_reset);
- if (ret) {
- dev_err(dev, "cannot deassert axi master reset\n");
- goto err_rst_axi_m;
- }
-
- ret = reset_control_deassert(res->axi_m_sticky_reset);
- if (ret) {
- dev_err(dev, "cannot deassert axi master sticky reset\n");
- goto err_rst_axi_m_sticky;
- }
-
- ret = reset_control_deassert(res->axi_s_reset);
- if (ret) {
- dev_err(dev, "cannot deassert axi slave reset\n");
- goto err_rst_axi_s;
- }
-
- ret = reset_control_deassert(res->pwr_reset);
- if (ret) {
- dev_err(dev, "cannot deassert power reset\n");
- goto err_rst_pwr;
- }
-
- ret = reset_control_deassert(res->ahb_reset);
- if (ret) {
- dev_err(dev, "cannot deassert ahb reset\n");
- goto err_rst_ahb;
- }
-
- usleep_range(10000, 12000);
-
- ret = clk_bulk_prepare_enable(res->num_clks, res->clks);
- if (ret)
- goto err_clks;
-
return 0;
-
-err_clks:
- reset_control_assert(res->ahb_reset);
-err_rst_ahb:
- reset_control_assert(res->pwr_reset);
-err_rst_pwr:
- reset_control_assert(res->axi_s_reset);
-err_rst_axi_s:
- reset_control_assert(res->axi_m_sticky_reset);
-err_rst_axi_m_sticky:
- reset_control_assert(res->axi_m_reset);
-err_rst_axi_m:
- reset_control_assert(res->pipe_sticky_reset);
-err_rst_pipe_sticky:
- reset_control_assert(res->pipe_reset);
-err_rst_pipe:
- reset_control_assert(res->phy_reset);
-err_rst_phy:
- reset_control_assert(res->phy_ahb_reset);
- return ret;
}
static int qcom_pcie_post_init_2_4_0(struct qcom_pcie *pcie)
All the resets are asserted and deasserted at the same time. So the bulk reset APIs can be used to handle them together. This simplifies the code a lot. It should be noted that there were delays in-between the reset asserts and deasserts. But going by the config used by other revisions, those delays are not really necessary. So a single delay after all asserts and one after deasserts is used. The total number of resets supported is 12 but only ipq4019 is using all of them. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- drivers/pci/controller/dwc/pcie-qcom.c | 238 ++++--------------------- 1 file changed, 30 insertions(+), 208 deletions(-)