@@ -1208,50 +1208,81 @@ static int enetc_pf_register_with_ierb(struct pci_dev *pdev)
return enetc_ierb_register_pf(ierb_pdev, pdev);
}
-static int enetc_pf_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static struct enetc_si *enetc_psi_create(struct pci_dev *pdev)
{
- struct device_node *node = pdev->dev.of_node;
- struct enetc_ndev_priv *priv;
- struct net_device *ndev;
struct enetc_si *si;
- struct enetc_pf *pf;
int err;
- err = enetc_pf_register_with_ierb(pdev);
- if (err == -EPROBE_DEFER)
- return err;
- if (err)
- dev_warn(&pdev->dev,
- "Could not register with IERB driver: %pe, please update the device tree\n",
- ERR_PTR(err));
-
- err = enetc_pci_probe(pdev, KBUILD_MODNAME, sizeof(*pf));
- if (err)
- return dev_err_probe(&pdev->dev, err, "PCI probing failed\n");
+ err = enetc_pci_probe(pdev, KBUILD_MODNAME, sizeof(struct enetc_pf));
+ if (err) {
+ dev_err_probe(&pdev->dev, err, "PCI probing failed\n");
+ goto out;
+ }
si = pci_get_drvdata(pdev);
if (!si->hw.port || !si->hw.global) {
err = -ENODEV;
dev_err(&pdev->dev, "could not map PF space, probing a VF?\n");
- goto err_map_pf_space;
+ goto out_pci_remove;
}
err = enetc_setup_cbdr(&pdev->dev, &si->hw, ENETC_CBDR_DEFAULT_SIZE,
&si->cbd_ring);
if (err)
- goto err_setup_cbdr;
+ goto out_pci_remove;
err = enetc_init_port_rfs_memory(si);
if (err) {
dev_err(&pdev->dev, "Failed to initialize RFS memory\n");
- goto err_init_port_rfs;
+ goto out_teardown_cbdr;
}
err = enetc_init_port_rss_memory(si);
if (err) {
dev_err(&pdev->dev, "Failed to initialize RSS memory\n");
- goto err_init_port_rss;
+ goto out_teardown_cbdr;
+ }
+
+ return si;
+
+out_teardown_cbdr:
+ enetc_teardown_cbdr(&si->cbd_ring);
+out_pci_remove:
+ enetc_pci_remove(pdev);
+out:
+ return ERR_PTR(err);
+}
+
+static void enetc_psi_destroy(struct pci_dev *pdev)
+{
+ struct enetc_si *si = pci_get_drvdata(pdev);
+
+ enetc_teardown_cbdr(&si->cbd_ring);
+ enetc_pci_remove(pdev);
+}
+
+static int enetc_pf_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct enetc_ndev_priv *priv;
+ struct net_device *ndev;
+ struct enetc_si *si;
+ struct enetc_pf *pf;
+ int err;
+
+ err = enetc_pf_register_with_ierb(pdev);
+ if (err == -EPROBE_DEFER)
+ return err;
+ if (err)
+ dev_warn(&pdev->dev,
+ "Could not register with IERB driver: %pe, please update the device tree\n",
+ ERR_PTR(err));
+
+ si = enetc_psi_create(pdev);
+ if (IS_ERR(si)) {
+ err = PTR_ERR(si);
+ goto err_psi_create;
}
if (node && !of_device_is_available(node)) {
@@ -1339,15 +1370,10 @@ static int enetc_pf_probe(struct pci_dev *pdev,
si->ndev = NULL;
free_netdev(ndev);
err_alloc_netdev:
-err_init_port_rss:
-err_init_port_rfs:
err_device_disabled:
err_setup_mac_addresses:
- enetc_teardown_cbdr(&si->cbd_ring);
-err_setup_cbdr:
-err_map_pf_space:
- enetc_pci_remove(pdev);
-
+ enetc_psi_destroy(pdev);
+err_psi_create:
return err;
}
@@ -1370,12 +1396,29 @@ static void enetc_pf_remove(struct pci_dev *pdev)
enetc_free_msix(priv);
enetc_free_si_resources(priv);
- enetc_teardown_cbdr(&si->cbd_ring);
free_netdev(si->ndev);
- enetc_pci_remove(pdev);
+ enetc_psi_destroy(pdev);
+}
+
+static void enetc_fixup_clear_rss_rfs(struct pci_dev *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct enetc_si *si;
+
+ /* Only apply quirk for disabled functions. For the ones
+ * that are enabled, enetc_pf_probe() will apply it.
+ */
+ if (node && of_device_is_available(node))
+ return;
+
+ si = enetc_psi_create(pdev);
+ if (si)
+ enetc_psi_destroy(pdev);
}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_FREESCALE, ENETC_DEV_ID_PF,
+ enetc_fixup_clear_rss_rfs);
static const struct pci_device_id enetc_pf_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, ENETC_DEV_ID_PF) },
The workaround implemented in commit 3222b5b613db ("net: enetc: initialize RFS/RSS memories for unused ports too") is no longer effective after commit 6fffbc7ae137 ("PCI: Honor firmware's device disabled status"). Thus, it has introduced a regression and we see AER errors being reported again: $ ip link set sw2p0 up && dhclient -i sw2p0 && ip addr show sw2p0 fsl_enetc 0000:00:00.2 eno2: configuring for fixed/internal link mode fsl_enetc 0000:00:00.2 eno2: Link is Up - 2.5Gbps/Full - flow control rx/tx mscc_felix 0000:00:00.5 swp2: configuring for fixed/sgmii link mode mscc_felix 0000:00:00.5 swp2: Link is Up - 1Gbps/Full - flow control off sja1105 spi2.2 sw2p0: configuring for phy/rgmii-id link mode sja1105 spi2.2 sw2p0: Link is Up - 1Gbps/Full - flow control off pcieport 0000:00:1f.0: AER: Multiple Corrected error received: 0000:00:00.0 pcieport 0000:00:1f.0: AER: can't find device of ID0000 Rob's suggestion is to reimplement the enetc driver workaround as a PCI fixup, and to modify the PCI core to run the fixups for all PCI functions. This change handles the first part. We refactor the common code in enetc_psi_create() and enetc_psi_destroy(), and use the PCI fixup only for those functions for which enetc_pf_probe() won't get called. This avoids some work being done twice for the PFs which are enabled. Fixes: 6fffbc7ae137 ("PCI: Honor firmware's device disabled status") Link: https://lore.kernel.org/netdev/CAL_JsqLsVYiPLx2kcHkDQ4t=hQVCR7NHziDwi9cCFUFhx48Qow@mail.gmail.com/ Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> --- .../net/ethernet/freescale/enetc/enetc_pf.c | 103 +++++++++++++----- 1 file changed, 73 insertions(+), 30 deletions(-)