diff mbox series

[v13,09/21] PCI: microchip: Move setup functions to pcie-plda-host.c

Message ID 20231214072839.2367-10-minda.chen@starfivetech.com (mailing list archive)
State Superseded
Delegated to: Lorenzo Pieralisi
Headers show
Series Refactoring Microchip PCIe driver and add StarFive PCIe | expand

Commit Message

Minda Chen Dec. 14, 2023, 7:28 a.m. UTC 
Move setup functions to common pcie-plda-host.c. So these two functions
can be re-used.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
 drivers/pci/controller/plda/Kconfig           |  4 +
 drivers/pci/controller/plda/Makefile          |  1 +
 .../pci/controller/plda/pcie-microchip-host.c | 59 --------------
 drivers/pci/controller/plda/pcie-plda-host.c  | 80 +++++++++++++++++++
 drivers/pci/controller/plda/pcie-plda.h       |  5 ++
 5 files changed, 90 insertions(+), 59 deletions(-)
 create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c

Comments

Lorenzo Pieralisi Dec. 27, 2023, 3:49 p.m. UTC | #1 
On Thu, Dec 14, 2023 at 03:28:27PM +0800, Minda Chen wrote:
> Move setup functions to common pcie-plda-host.c. So these two functions
> can be re-used.
> 
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> ---
>  drivers/pci/controller/plda/Kconfig           |  4 +
>  drivers/pci/controller/plda/Makefile          |  1 +
>  .../pci/controller/plda/pcie-microchip-host.c | 59 --------------
>  drivers/pci/controller/plda/pcie-plda-host.c  | 80 +++++++++++++++++++
>  drivers/pci/controller/plda/pcie-plda.h       |  5 ++
>  5 files changed, 90 insertions(+), 59 deletions(-)
>  create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
> 
> diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
> index 5cb3be4fc98c..e54a82ee94f5 100644
> --- a/drivers/pci/controller/plda/Kconfig
> +++ b/drivers/pci/controller/plda/Kconfig
> @@ -3,10 +3,14 @@
>  menu "PLDA-based PCIe controllers"
>  	depends on PCI
>  
> +config PCIE_PLDA_HOST
> +	bool
> +
>  config PCIE_MICROCHIP_HOST
>  	tristate "Microchip AXI PCIe controller"
>  	depends on PCI_MSI && OF
>  	select PCI_HOST_COMMON
> +	select PCIE_PLDA_HOST
>  	help
>  	  Say Y here if you want kernel to support the Microchip AXI PCIe
>  	  Host Bridge driver.
> diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
> index e1a265cbf91c..4340ab007f44 100644
> --- a/drivers/pci/controller/plda/Makefile
> +++ b/drivers/pci/controller/plda/Makefile
> @@ -1,2 +1,3 @@
>  # SPDX-License-Identifier: GPL-2.0
> +obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
>  obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
> diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
> index 31ca8d44ee2a..2e79bcc7c0a5 100644
> --- a/drivers/pci/controller/plda/pcie-microchip-host.c
> +++ b/drivers/pci/controller/plda/pcie-microchip-host.c
> @@ -838,65 +838,6 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
>  	return mc_allocate_msi_domains(port);
>  }
>  
> -static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
> -				   phys_addr_t axi_addr, phys_addr_t pci_addr,
> -				   size_t size)
> -{
> -	u32 atr_sz = ilog2(size) - 1;
> -	u32 val;
> -
> -	if (index == 0)
> -		val = PCIE_CONFIG_INTERFACE;
> -	else
> -		val = PCIE_TX_RX_INTERFACE;
> -
> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> -	       ATR0_AXI4_SLV0_TRSL_PARAM);
> -
> -	val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
> -			    ATR_IMPL_ENABLE;
> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> -	       ATR0_AXI4_SLV0_SRCADDR_PARAM);
> -
> -	val = upper_32_bits(axi_addr);
> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> -	       ATR0_AXI4_SLV0_SRC_ADDR);
> -
> -	val = lower_32_bits(pci_addr);
> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> -	       ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
> -
> -	val = upper_32_bits(pci_addr);
> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> -	       ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
> -
> -	val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
> -	val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
> -	writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
> -	writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
> -}
> -
> -static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> -				  struct plda_pcie_rp *port)
> -{
> -	void __iomem *bridge_base_addr = port->bridge_addr;
> -	struct resource_entry *entry;
> -	u64 pci_addr;
> -	u32 index = 1;
> -
> -	resource_list_for_each_entry(entry, &bridge->windows) {
> -		if (resource_type(entry->res) == IORESOURCE_MEM) {
> -			pci_addr = entry->res->start - entry->offset;
> -			plda_pcie_setup_window(bridge_base_addr, index,
> -					       entry->res->start, pci_addr,
> -					       resource_size(entry->res));
> -			index++;
> -		}
> -	}
> -
> -	return 0;
> -}
> -
>  static inline void mc_clear_secs(struct mc_pcie *port)
>  {
>  	void __iomem *ctrl_base_addr = port->axi_base_addr + MC_PCIE_CTRL_ADDR;
> diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
> new file mode 100644
> index 000000000000..19131181897f
> --- /dev/null
> +++ b/drivers/pci/controller/plda/pcie-plda-host.c
> @@ -0,0 +1,80 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PLDA PCIe XpressRich host controller driver
> + *
> + * Copyright (C) 2023 Microchip Co. Ltd
> + *
> + * Author: Daire McNamara <daire.mcnamara@microchip.com>
> + */
> +
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/msi.h>
> +#include <linux/of_address.h>
> +#include <linux/of_pci.h>
> +#include <linux/pci_regs.h>
> +#include <linux/pci-ecam.h>
> +#include <linux/platform_device.h>

Do you really require these headers ? Not in this patch,
in later patches and that's why every header should be
added when it is really needed.

Lorenzo

> +
> +#include "pcie-plda.h"
> +
> +void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
> +			    phys_addr_t axi_addr, phys_addr_t pci_addr,
> +			    size_t size)
> +{
> +	u32 atr_sz = ilog2(size) - 1;
> +	u32 val;
> +
> +	if (index == 0)
> +		val = PCIE_CONFIG_INTERFACE;
> +	else
> +		val = PCIE_TX_RX_INTERFACE;
> +
> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> +	       ATR0_AXI4_SLV0_TRSL_PARAM);
> +
> +	val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
> +			    ATR_IMPL_ENABLE;
> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> +	       ATR0_AXI4_SLV0_SRCADDR_PARAM);
> +
> +	val = upper_32_bits(axi_addr);
> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> +	       ATR0_AXI4_SLV0_SRC_ADDR);
> +
> +	val = lower_32_bits(pci_addr);
> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> +	       ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
> +
> +	val = upper_32_bits(pci_addr);
> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> +	       ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
> +
> +	val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
> +	val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
> +	writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
> +	writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
> +}
> +EXPORT_SYMBOL_GPL(plda_pcie_setup_window);
> +
> +int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> +			   struct plda_pcie_rp *port)
> +{
> +	void __iomem *bridge_base_addr = port->bridge_addr;
> +	struct resource_entry *entry;
> +	u64 pci_addr;
> +	u32 index = 1;
> +
> +	resource_list_for_each_entry(entry, &bridge->windows) {
> +		if (resource_type(entry->res) == IORESOURCE_MEM) {
> +			pci_addr = entry->res->start - entry->offset;
> +			plda_pcie_setup_window(bridge_base_addr, index,
> +					       entry->res->start, pci_addr,
> +					       resource_size(entry->res));
> +			index++;
> +		}
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
> diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
> index 363fcbbaf6ec..3deefd35fa5a 100644
> --- a/drivers/pci/controller/plda/pcie-plda.h
> +++ b/drivers/pci/controller/plda/pcie-plda.h
> @@ -120,4 +120,9 @@ struct plda_pcie_rp {
>  	void __iomem *bridge_addr;
>  };
>  
> +void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
> +			    phys_addr_t axi_addr, phys_addr_t pci_addr,
> +			    size_t size);
> +int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> +			   struct plda_pcie_rp *port);
>  #endif
> -- 
> 2.17.1
>
Minda Chen Dec. 28, 2023, 9:46 a.m. UTC | #2 
On 2023/12/27 23:49, Lorenzo Pieralisi wrote:
> On Thu, Dec 14, 2023 at 03:28:27PM +0800, Minda Chen wrote:
>> Move setup functions to common pcie-plda-host.c. So these two functions
>> can be re-used.
>> 
>> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
>> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
>> ---
>>  drivers/pci/controller/plda/Kconfig           |  4 +
>>  drivers/pci/controller/plda/Makefile          |  1 +
>>  .../pci/controller/plda/pcie-microchip-host.c | 59 --------------
>>  drivers/pci/controller/plda/pcie-plda-host.c  | 80 +++++++++++++++++++
>>  drivers/pci/controller/plda/pcie-plda.h       |  5 ++
>>  5 files changed, 90 insertions(+), 59 deletions(-)
>>  create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
>> 
>> diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
>> index 5cb3be4fc98c..e54a82ee94f5 100644
>> --- a/drivers/pci/controller/plda/Kconfig
>> +++ b/drivers/pci/controller/plda/Kconfig
>> @@ -3,10 +3,14 @@
>>  menu "PLDA-based PCIe controllers"
>>  	depends on PCI
>>  
>> +config PCIE_PLDA_HOST
>> +	bool
>> +
>>  config PCIE_MICROCHIP_HOST
>>  	tristate "Microchip AXI PCIe controller"
>>  	depends on PCI_MSI && OF
>>  	select PCI_HOST_COMMON
>> +	select PCIE_PLDA_HOST
>>  	help
>>  	  Say Y here if you want kernel to support the Microchip AXI PCIe
>>  	  Host Bridge driver.
>> diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
>> index e1a265cbf91c..4340ab007f44 100644
>> --- a/drivers/pci/controller/plda/Makefile
>> +++ b/drivers/pci/controller/plda/Makefile
>> @@ -1,2 +1,3 @@
>>  # SPDX-License-Identifier: GPL-2.0
>> +obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
>>  obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
>> diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
>> index 31ca8d44ee2a..2e79bcc7c0a5 100644
>> --- a/drivers/pci/controller/plda/pcie-microchip-host.c
>> +++ b/drivers/pci/controller/plda/pcie-microchip-host.c
>> @@ -838,65 +838,6 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
>>  	return mc_allocate_msi_domains(port);
>>  }
>>  
>> -static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
>> -				   phys_addr_t axi_addr, phys_addr_t pci_addr,
>> -				   size_t size)
>> -{
>> -	u32 atr_sz = ilog2(size) - 1;
>> -	u32 val;
>> -
>> -	if (index == 0)
>> -		val = PCIE_CONFIG_INTERFACE;
>> -	else
>> -		val = PCIE_TX_RX_INTERFACE;
>> -
>> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> -	       ATR0_AXI4_SLV0_TRSL_PARAM);
>> -
>> -	val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
>> -			    ATR_IMPL_ENABLE;
>> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> -	       ATR0_AXI4_SLV0_SRCADDR_PARAM);
>> -
>> -	val = upper_32_bits(axi_addr);
>> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> -	       ATR0_AXI4_SLV0_SRC_ADDR);
>> -
>> -	val = lower_32_bits(pci_addr);
>> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> -	       ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
>> -
>> -	val = upper_32_bits(pci_addr);
>> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> -	       ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
>> -
>> -	val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
>> -	val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
>> -	writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
>> -	writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
>> -}
>> -
>> -static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
>> -				  struct plda_pcie_rp *port)
>> -{
>> -	void __iomem *bridge_base_addr = port->bridge_addr;
>> -	struct resource_entry *entry;
>> -	u64 pci_addr;
>> -	u32 index = 1;
>> -
>> -	resource_list_for_each_entry(entry, &bridge->windows) {
>> -		if (resource_type(entry->res) == IORESOURCE_MEM) {
>> -			pci_addr = entry->res->start - entry->offset;
>> -			plda_pcie_setup_window(bridge_base_addr, index,
>> -					       entry->res->start, pci_addr,
>> -					       resource_size(entry->res));
>> -			index++;
>> -		}
>> -	}
>> -
>> -	return 0;
>> -}
>> -
>>  static inline void mc_clear_secs(struct mc_pcie *port)
>>  {
>>  	void __iomem *ctrl_base_addr = port->axi_base_addr + MC_PCIE_CTRL_ADDR;
>> diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
>> new file mode 100644
>> index 000000000000..19131181897f
>> --- /dev/null
>> +++ b/drivers/pci/controller/plda/pcie-plda-host.c
>> @@ -0,0 +1,80 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * PLDA PCIe XpressRich host controller driver
>> + *
>> + * Copyright (C) 2023 Microchip Co. Ltd
>> + *
>> + * Author: Daire McNamara <daire.mcnamara@microchip.com>
>> + */
>> +
>> +#include <linux/irqchip/chained_irq.h>
>> +#include <linux/irqdomain.h>
>> +#include <linux/msi.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_pci.h>
>> +#include <linux/pci_regs.h>
>> +#include <linux/pci-ecam.h>
>> +#include <linux/platform_device.h>
> 
> Do you really require these headers ? Not in this patch,
> in later patches and that's why every header should be
> added when it is really needed.
> 
> Lorenzo
> 
OK, I will change this. thanks.
>> +
>> +#include "pcie-plda.h"
>> +
>> +void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
>> +			    phys_addr_t axi_addr, phys_addr_t pci_addr,
>> +			    size_t size)
>> +{
>> +	u32 atr_sz = ilog2(size) - 1;
>> +	u32 val;
>> +
>> +	if (index == 0)
>> +		val = PCIE_CONFIG_INTERFACE;
>> +	else
>> +		val = PCIE_TX_RX_INTERFACE;
>> +
>> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> +	       ATR0_AXI4_SLV0_TRSL_PARAM);
>> +
>> +	val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
>> +			    ATR_IMPL_ENABLE;
>> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> +	       ATR0_AXI4_SLV0_SRCADDR_PARAM);
>> +
>> +	val = upper_32_bits(axi_addr);
>> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> +	       ATR0_AXI4_SLV0_SRC_ADDR);
>> +
>> +	val = lower_32_bits(pci_addr);
>> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> +	       ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
>> +
>> +	val = upper_32_bits(pci_addr);
>> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> +	       ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
>> +
>> +	val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
>> +	val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
>> +	writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
>> +	writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
>> +}
>> +EXPORT_SYMBOL_GPL(plda_pcie_setup_window);
>> +
>> +int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
>> +			   struct plda_pcie_rp *port)
>> +{
>> +	void __iomem *bridge_base_addr = port->bridge_addr;
>> +	struct resource_entry *entry;
>> +	u64 pci_addr;
>> +	u32 index = 1;
>> +
>> +	resource_list_for_each_entry(entry, &bridge->windows) {
>> +		if (resource_type(entry->res) == IORESOURCE_MEM) {
>> +			pci_addr = entry->res->start - entry->offset;
>> +			plda_pcie_setup_window(bridge_base_addr, index,
>> +					       entry->res->start, pci_addr,
>> +					       resource_size(entry->res));
>> +			index++;
>> +		}
>> +	}
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
>> diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
>> index 363fcbbaf6ec..3deefd35fa5a 100644
>> --- a/drivers/pci/controller/plda/pcie-plda.h
>> +++ b/drivers/pci/controller/plda/pcie-plda.h
>> @@ -120,4 +120,9 @@ struct plda_pcie_rp {
>>  	void __iomem *bridge_addr;
>>  };
>>  
>> +void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
>> +			    phys_addr_t axi_addr, phys_addr_t pci_addr,
>> +			    size_t size);
>> +int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
>> +			   struct plda_pcie_rp *port);
>>  #endif
>> -- 
>> 2.17.1
>>
diff mbox series

Patch

diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
index 5cb3be4fc98c..e54a82ee94f5 100644
--- a/drivers/pci/controller/plda/Kconfig
+++ b/drivers/pci/controller/plda/Kconfig
@@ -3,10 +3,14 @@ 
 menu "PLDA-based PCIe controllers"
 	depends on PCI
 
+config PCIE_PLDA_HOST
+	bool
+
 config PCIE_MICROCHIP_HOST
 	tristate "Microchip AXI PCIe controller"
 	depends on PCI_MSI && OF
 	select PCI_HOST_COMMON
+	select PCIE_PLDA_HOST
 	help
 	  Say Y here if you want kernel to support the Microchip AXI PCIe
 	  Host Bridge driver.
diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
index e1a265cbf91c..4340ab007f44 100644
--- a/drivers/pci/controller/plda/Makefile
+++ b/drivers/pci/controller/plda/Makefile
@@ -1,2 +1,3 @@ 
 # SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
 obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
index 31ca8d44ee2a..2e79bcc7c0a5 100644
--- a/drivers/pci/controller/plda/pcie-microchip-host.c
+++ b/drivers/pci/controller/plda/pcie-microchip-host.c
@@ -838,65 +838,6 @@  static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
 	return mc_allocate_msi_domains(port);
 }
 
-static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
-				   phys_addr_t axi_addr, phys_addr_t pci_addr,
-				   size_t size)
-{
-	u32 atr_sz = ilog2(size) - 1;
-	u32 val;
-
-	if (index == 0)
-		val = PCIE_CONFIG_INTERFACE;
-	else
-		val = PCIE_TX_RX_INTERFACE;
-
-	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
-	       ATR0_AXI4_SLV0_TRSL_PARAM);
-
-	val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
-			    ATR_IMPL_ENABLE;
-	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
-	       ATR0_AXI4_SLV0_SRCADDR_PARAM);
-
-	val = upper_32_bits(axi_addr);
-	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
-	       ATR0_AXI4_SLV0_SRC_ADDR);
-
-	val = lower_32_bits(pci_addr);
-	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
-	       ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
-
-	val = upper_32_bits(pci_addr);
-	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
-	       ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
-
-	val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
-	val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
-	writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
-	writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
-}
-
-static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
-				  struct plda_pcie_rp *port)
-{
-	void __iomem *bridge_base_addr = port->bridge_addr;
-	struct resource_entry *entry;
-	u64 pci_addr;
-	u32 index = 1;
-
-	resource_list_for_each_entry(entry, &bridge->windows) {
-		if (resource_type(entry->res) == IORESOURCE_MEM) {
-			pci_addr = entry->res->start - entry->offset;
-			plda_pcie_setup_window(bridge_base_addr, index,
-					       entry->res->start, pci_addr,
-					       resource_size(entry->res));
-			index++;
-		}
-	}
-
-	return 0;
-}
-
 static inline void mc_clear_secs(struct mc_pcie *port)
 {
 	void __iomem *ctrl_base_addr = port->axi_base_addr + MC_PCIE_CTRL_ADDR;
diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
new file mode 100644
index 000000000000..19131181897f
--- /dev/null
+++ b/drivers/pci/controller/plda/pcie-plda-host.c
@@ -0,0 +1,80 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PLDA PCIe XpressRich host controller driver
+ *
+ * Copyright (C) 2023 Microchip Co. Ltd
+ *
+ * Author: Daire McNamara <daire.mcnamara@microchip.com>
+ */
+
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/pci_regs.h>
+#include <linux/pci-ecam.h>
+#include <linux/platform_device.h>
+
+#include "pcie-plda.h"
+
+void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
+			    phys_addr_t axi_addr, phys_addr_t pci_addr,
+			    size_t size)
+{
+	u32 atr_sz = ilog2(size) - 1;
+	u32 val;
+
+	if (index == 0)
+		val = PCIE_CONFIG_INTERFACE;
+	else
+		val = PCIE_TX_RX_INTERFACE;
+
+	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+	       ATR0_AXI4_SLV0_TRSL_PARAM);
+
+	val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
+			    ATR_IMPL_ENABLE;
+	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+	       ATR0_AXI4_SLV0_SRCADDR_PARAM);
+
+	val = upper_32_bits(axi_addr);
+	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+	       ATR0_AXI4_SLV0_SRC_ADDR);
+
+	val = lower_32_bits(pci_addr);
+	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+	       ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
+
+	val = upper_32_bits(pci_addr);
+	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+	       ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
+
+	val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
+	val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
+	writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
+	writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
+}
+EXPORT_SYMBOL_GPL(plda_pcie_setup_window);
+
+int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
+			   struct plda_pcie_rp *port)
+{
+	void __iomem *bridge_base_addr = port->bridge_addr;
+	struct resource_entry *entry;
+	u64 pci_addr;
+	u32 index = 1;
+
+	resource_list_for_each_entry(entry, &bridge->windows) {
+		if (resource_type(entry->res) == IORESOURCE_MEM) {
+			pci_addr = entry->res->start - entry->offset;
+			plda_pcie_setup_window(bridge_base_addr, index,
+					       entry->res->start, pci_addr,
+					       resource_size(entry->res));
+			index++;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
index 363fcbbaf6ec..3deefd35fa5a 100644
--- a/drivers/pci/controller/plda/pcie-plda.h
+++ b/drivers/pci/controller/plda/pcie-plda.h
@@ -120,4 +120,9 @@  struct plda_pcie_rp {
 	void __iomem *bridge_addr;
 };
 
+void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
+			    phys_addr_t axi_addr, phys_addr_t pci_addr,
+			    size_t size);
+int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
+			   struct plda_pcie_rp *port);
 #endif