@@ -26,6 +26,21 @@ static const struct x86_cpu_id p2sb_cpu_ids[] = {
{}
};
+/*
+ * Cache BAR0 of P2SB device functions 0 to 7.
+ * TODO: The constant 8 is the number of functions that PCI specification
+ * defines. Same definitions exist tree-wide. Unify this definition and
+ * the other definitions then move to include/uapi/linux/pci.h.
+ */
+#define NR_P2SB_RES_CACHE 8
+
+struct p2sb_res_cache {
+ u32 bus_dev_id;
+ struct resource res;
+};
+
+static struct p2sb_res_cache p2sb_resources[NR_P2SB_RES_CACHE];
+
static int p2sb_get_devfn(unsigned int *devfn)
{
unsigned int fn = P2SB_DEVFN_DEFAULT;
@@ -39,8 +54,16 @@ static int p2sb_get_devfn(unsigned int *devfn)
return 0;
}
+static bool p2sb_valid_resource(struct resource *res)
+{
+ if (res->flags)
+ return true;
+
+ return false;
+}
+
/* Copy resource from the first BAR of the device in question */
-static int p2sb_read_bar0(struct pci_dev *pdev, struct resource *mem)
+static void p2sb_read_bar0(struct pci_dev *pdev, struct resource *mem)
{
struct resource *bar0 = &pdev->resource[0];
@@ -56,47 +79,64 @@ static int p2sb_read_bar0(struct pci_dev *pdev, struct resource *mem)
mem->end = bar0->end;
mem->flags = bar0->flags;
mem->desc = bar0->desc;
-
- return 0;
}
-static int p2sb_scan_and_read(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
+static void p2sb_scan_and_cache_devfn(struct pci_bus *bus, unsigned int devfn)
{
+ struct p2sb_res_cache *cache = &p2sb_resources[PCI_FUNC(devfn)];
struct pci_dev *pdev;
- int ret;
pdev = pci_scan_single_device(bus, devfn);
if (!pdev)
- return -ENODEV;
+ return;
- ret = p2sb_read_bar0(pdev, mem);
+ p2sb_read_bar0(pdev, &cache->res);
+ cache->bus_dev_id = bus->dev.id;
pci_stop_and_remove_bus_device(pdev);
- return ret;
+ return;
}
-/**
- * p2sb_bar - Get Primary to Sideband (P2SB) bridge device BAR
- * @bus: PCI bus to communicate with
- * @devfn: PCI slot and function to communicate with
- * @mem: memory resource to be filled in
- *
- * The BIOS prevents the P2SB device from being enumerated by the PCI
- * subsystem, so we need to unhide and hide it back to lookup the BAR.
- *
- * if @bus is NULL, the bus 0 in domain 0 will be used.
- * If @devfn is 0, it will be replaced by devfn of the P2SB device.
- *
- * Caller must provide a valid pointer to @mem.
- *
- * Locking is handled by pci_rescan_remove_lock mutex.
- *
- * Return:
- * 0 on success or appropriate errno value on error.
- */
-int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
+static int p2sb_scan_and_cache(struct pci_bus *bus, unsigned int devfn)
+{
+ unsigned int slot, fn;
+
+ if (PCI_FUNC(devfn) == 0) {
+ /*
+ * When function number of the P2SB device is zero, scan it and
+ * other function numbers, and if devices are available, cache
+ * their BAR0s.
+ */
+ slot = PCI_SLOT(devfn);
+ for (fn = 0; fn < NR_P2SB_RES_CACHE; fn++)
+ p2sb_scan_and_cache_devfn(bus, PCI_DEVFN(slot, fn));
+ } else {
+ /* Scan the P2SB device and cache its BAR0 */
+ p2sb_scan_and_cache_devfn(bus, devfn);
+ }
+
+ if (!p2sb_valid_resource(&p2sb_resources[PCI_FUNC(devfn)].res))
+ return -ENOENT;
+
+ return 0;
+}
+
+static struct pci_bus *p2sb_get_bus(struct pci_bus *bus)
+{
+ static struct pci_bus *p2sb_bus;
+
+ bus = bus ?: p2sb_bus;
+ if (bus)
+ return bus;
+
+ /* Assume P2SB is on the bus 0 in domain 0 */
+ p2sb_bus = pci_find_bus(0, 0);
+ return p2sb_bus;
+}
+
+static int p2sb_cache_resources(void)
{
- struct pci_dev *pdev_p2sb;
+ struct pci_bus *bus;
unsigned int devfn_p2sb;
u32 value = P2SBC_HIDE;
int ret;
@@ -106,8 +146,9 @@ int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
if (ret)
return ret;
- /* if @bus is NULL, use bus 0 in domain 0 */
- bus = bus ?: pci_find_bus(0, 0);
+ bus = p2sb_get_bus(NULL);
+ if (!bus)
+ return -ENODEV;
/*
* Prevent concurrent PCI bus scan from seeing the P2SB device and
@@ -115,17 +156,16 @@ int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
*/
pci_lock_rescan_remove();
- /* Unhide the P2SB device, if needed */
+ /*
+ * The BIOS prevents the P2SB device from being enumerated by the PCI
+ * subsystem, so we need to unhide and hide it back to lookup the BAR.
+ * Unhide the P2SB device here, if needed.
+ */
pci_bus_read_config_dword(bus, devfn_p2sb, P2SBC, &value);
if (value & P2SBC_HIDE)
pci_bus_write_config_dword(bus, devfn_p2sb, P2SBC, 0);
- pdev_p2sb = pci_scan_single_device(bus, devfn_p2sb);
- if (devfn)
- ret = p2sb_scan_and_read(bus, devfn, mem);
- else
- ret = p2sb_read_bar0(pdev_p2sb, mem);
- pci_stop_and_remove_bus_device(pdev_p2sb);
+ ret = p2sb_scan_and_cache(bus, devfn_p2sb);
/* Hide the P2SB device, if it was hidden */
if (value & P2SBC_HIDE)
@@ -133,12 +173,62 @@ int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
pci_unlock_rescan_remove();
- if (ret)
- return ret;
+ return ret;
+}
+
+/**
+ * p2sb_bar - Get Primary to Sideband (P2SB) bridge device BAR
+ * @bus: PCI bus to communicate with
+ * @devfn: PCI slot and function to communicate with
+ * @mem: memory resource to be filled in
+ *
+ * If @bus is NULL, the bus 0 in domain 0 will be used.
+ * If @devfn is 0, it will be replaced by devfn of the P2SB device.
+ *
+ * Caller must provide a valid pointer to @mem.
+ *
+ * Return:
+ * 0 on success or appropriate errno value on error.
+ */
+int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem)
+{
+ struct p2sb_res_cache *cache;
+ int ret;
- if (mem->flags == 0)
+ bus = p2sb_get_bus(bus);
+ if (!bus)
return -ENODEV;
+ if (!devfn) {
+ ret = p2sb_get_devfn(&devfn);
+ if (ret)
+ return ret;
+ }
+
+ cache = &p2sb_resources[PCI_FUNC(devfn)];
+ if (cache->bus_dev_id != bus->dev.id)
+ return -ENODEV;
+
+ if (!p2sb_valid_resource(&cache->res))
+ return -ENOENT;
+
+ memcpy(mem, &cache->res, sizeof(*mem));
return 0;
}
EXPORT_SYMBOL_GPL(p2sb_bar);
+
+static int __init p2sb_fs_init(void)
+{
+ p2sb_cache_resources();
+ return 0;
+}
+
+/*
+ * pci_rescan_remove_lock to avoid access to unhidden P2SB devices can
+ * not be locked in sysfs pci bus rescan path because of deadlock. To
+ * avoid the deadlock, access to P2SB devices with the lock at an early
+ * step in kernel initialization and cache required resources. This
+ * should happen after subsys_initcall which initializes PCI subsystem
+ * and before device_initcall which requires P2SB resources.
+ */
+fs_initcall(p2sb_fs_init);
p2sb_bar() unhides P2SB device to get resources from the device. It guards the operation by locking pci_rescan_remove_lock so that parallel rescans do not find the P2SB device. However, this lock causes deadlock when PCI bus rescan is triggered by /sys/bus/pci/rescan. The rescan locks pci_rescan_remove_lock and probes PCI devices. When PCI devices call p2sb_bar() during probe, it locks pci_rescan_remove_lock again. Hence the deadlock. To avoid the deadlock, do not lock pci_rescan_remove_lock in p2sb_bar(). Instead, do the lock at fs_initcall. Introduce p2sb_cache_resources() for fs_initcall which gets and caches the P2SB resources. At p2sb_bar(), refer the cache and return to the caller. Link: https://lore.kernel.org/linux-pci/6xb24fjmptxxn5js2fjrrddjae6twex5bjaftwqsuawuqqqydx@7cl3uik5ef6j/ Fixes: 9745fb07474f ("platform/x86/intel: Add Primary to Sideband (P2SB) bridge support") Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> --- drivers/platform/x86/p2sb.c | 172 +++++++++++++++++++++++++++--------- 1 file changed, 131 insertions(+), 41 deletions(-)