diff mbox series

[v7,4/7] PCI: j721e: Add reset GPIO to struct j721e_pcie

Message ID 20240102-j7200-pcie-s2r-v7-4-a2f9156da6c3@bootlin.com (mailing list archive)
State Accepted
Delegated to: Krzysztof Wilczyński
Headers show
Series Add suspend to ram support for PCIe on J7200 | expand

Commit Message

Thomas Richard June 19, 2024, 10:15 a.m. UTC 
From: Théo Lebrun <theo.lebrun@bootlin.com>

Add reset GPIO to struct j721e_pcie, so it can be used at suspend and
resume stages.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
---
 drivers/pci/controller/cadence/pci-j721e.c | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 98484f001562..9af4fd64c1f9 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -52,6 +52,7 @@  struct j721e_pcie {
 	u32			mode;
 	u32			num_lanes;
 	u32			max_lanes;
+	struct gpio_desc	*reset_gpio;
 	void __iomem		*user_cfg_base;
 	void __iomem		*intd_cfg_base;
 	u32			linkdown_irq_regfield;
@@ -508,6 +509,7 @@  static int j721e_pcie_probe(struct platform_device *pdev)
 			ret = dev_err_probe(dev, PTR_ERR(gpiod), "Failed to get reset GPIO\n");
 			goto err_get_sync;
 		}
+		pcie->reset_gpio = gpiod;
 
 		ret = cdns_pcie_init_phy(dev, cdns_pcie);
 		if (ret) {