| Message ID | 20240105062217.349645-2-Jiqian.Chen@amd.com (mailing list archive) |
|---|---|
| State | RFC |
| Delegated to: | Krzysztof Wilczyński |
| Headers | show |
| Series | Support device passthrough when dom0 is PVH on Xen | expand |
On Fri, 5 Jan 2024, Jiqian Chen wrote: > When device on dom0 side has been reset, the vpci on Xen side > won't get notification, so that the cached state in vpci is > all out of date with the real device state. > To solve that problem, add a new function to clear all vpci > device state when device is reset on dom0 side. > > And call that function in pcistub_init_device. Because when > using "pci-assignable-add" to assign a passthrough device in > Xen, it will reset passthrough device and the vpci state will > out of date, and then device will fail to restore bar state. > > Co-developed-by: Huang Rui <ray.huang@amd.com> > Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> > --- > drivers/xen/pci.c | 12 ++++++++++++ > drivers/xen/xen-pciback/pci_stub.c | 18 +++++++++++++++--- > include/xen/interface/physdev.h | 7 +++++++ > include/xen/pci.h | 6 ++++++ > 4 files changed, 40 insertions(+), 3 deletions(-) > > diff --git a/drivers/xen/pci.c b/drivers/xen/pci.c > index 72d4e3f193af..e9b30bc09139 100644 > --- a/drivers/xen/pci.c > +++ b/drivers/xen/pci.c > @@ -177,6 +177,18 @@ static int xen_remove_device(struct device *dev) > return r; > } > > +int xen_reset_device_state(const struct pci_dev *dev) > +{ > + struct physdev_pci_device device = { > + .seg = pci_domain_nr(dev->bus), > + .bus = dev->bus->number, > + .devfn = dev->devfn > + }; > + > + return HYPERVISOR_physdev_op(PHYSDEVOP_pci_device_state_reset, &device); > +} > +EXPORT_SYMBOL_GPL(xen_reset_device_state); > + > static int xen_pci_notifier(struct notifier_block *nb, > unsigned long action, void *data) > { > diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c > index e34b623e4b41..46c40ec8a18e 100644 > --- a/drivers/xen/xen-pciback/pci_stub.c > +++ b/drivers/xen/xen-pciback/pci_stub.c > @@ -89,6 +89,16 @@ static struct pcistub_device *pcistub_device_alloc(struct pci_dev *dev) > return psdev; > } > > +static int pcistub_reset_device_state(struct pci_dev *dev) > +{ > + __pci_reset_function_locked(dev); > + > + if (!xen_pv_domain()) > + return xen_reset_device_state(dev); > + else > + return 0; > +} > + > /* Don't call this directly as it's called by pcistub_device_put */ > static void pcistub_device_release(struct kref *kref) > { > @@ -107,7 +117,7 @@ static void pcistub_device_release(struct kref *kref) > /* Call the reset function which does not take lock as this > * is called from "unbind" which takes a device_lock mutex. > */ > - __pci_reset_function_locked(dev); > + pcistub_reset_device_state(dev); > if (dev_data && > pci_load_and_free_saved_state(dev, &dev_data->pci_saved_state)) > dev_info(&dev->dev, "Could not reload PCI state\n"); > @@ -284,7 +294,7 @@ void pcistub_put_pci_dev(struct pci_dev *dev) > * (so it's ready for the next domain) > */ > device_lock_assert(&dev->dev); > - __pci_reset_function_locked(dev); > + pcistub_reset_device_state(dev); > > dev_data = pci_get_drvdata(dev); > ret = pci_load_saved_state(dev, dev_data->pci_saved_state); > @@ -420,7 +430,9 @@ static int pcistub_init_device(struct pci_dev *dev) > dev_err(&dev->dev, "Could not store PCI conf saved state!\n"); > else { > dev_dbg(&dev->dev, "resetting (FLR, D3, etc) the device\n"); > - __pci_reset_function_locked(dev); > + err = pcistub_reset_device_state(dev); > + if (err) > + goto config_release; > pci_restore_state(dev); > } > /* Now disable the device (this also ensures some private device > diff --git a/include/xen/interface/physdev.h b/include/xen/interface/physdev.h > index a237af867873..8609770e28f5 100644 > --- a/include/xen/interface/physdev.h > +++ b/include/xen/interface/physdev.h > @@ -256,6 +256,13 @@ struct physdev_pci_device_add { > */ > #define PHYSDEVOP_prepare_msix 30 > #define PHYSDEVOP_release_msix 31 > +/* > + * Notify the hypervisor that a PCI device has been reset, so that any > + * internally cached state is regenerated. Should be called after any > + * device reset performed by the hardware domain. > + */ > +#define PHYSDEVOP_pci_device_state_reset 32 > + > struct physdev_pci_device { > /* IN */ > uint16_t seg; > diff --git a/include/xen/pci.h b/include/xen/pci.h > index b8337cf85fd1..b2e2e856efd6 100644 > --- a/include/xen/pci.h > +++ b/include/xen/pci.h > @@ -4,10 +4,16 @@ > #define __XEN_PCI_H__ > > #if defined(CONFIG_XEN_DOM0) > +int xen_reset_device_state(const struct pci_dev *dev); > int xen_find_device_domain_owner(struct pci_dev *dev); > int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain); > int xen_unregister_device_domain_owner(struct pci_dev *dev); > #else > +static inline int xen_reset_device_state(const struct pci_dev *dev) > +{ > + return -1; > +} > + > static inline int xen_find_device_domain_owner(struct pci_dev *dev) > { > return -1; > -- > 2.34.1 >
diff --git a/drivers/xen/pci.c b/drivers/xen/pci.c index 72d4e3f193af..e9b30bc09139 100644 --- a/drivers/xen/pci.c +++ b/drivers/xen/pci.c @@ -177,6 +177,18 @@ static int xen_remove_device(struct device *dev) return r; } +int xen_reset_device_state(const struct pci_dev *dev) +{ + struct physdev_pci_device device = { + .seg = pci_domain_nr(dev->bus), + .bus = dev->bus->number, + .devfn = dev->devfn + }; + + return HYPERVISOR_physdev_op(PHYSDEVOP_pci_device_state_reset, &device); +} +EXPORT_SYMBOL_GPL(xen_reset_device_state); + static int xen_pci_notifier(struct notifier_block *nb, unsigned long action, void *data) { diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c index e34b623e4b41..46c40ec8a18e 100644 --- a/drivers/xen/xen-pciback/pci_stub.c +++ b/drivers/xen/xen-pciback/pci_stub.c @@ -89,6 +89,16 @@ static struct pcistub_device *pcistub_device_alloc(struct pci_dev *dev) return psdev; } +static int pcistub_reset_device_state(struct pci_dev *dev) +{ + __pci_reset_function_locked(dev); + + if (!xen_pv_domain()) + return xen_reset_device_state(dev); + else + return 0; +} + /* Don't call this directly as it's called by pcistub_device_put */ static void pcistub_device_release(struct kref *kref) { @@ -107,7 +117,7 @@ static void pcistub_device_release(struct kref *kref) /* Call the reset function which does not take lock as this * is called from "unbind" which takes a device_lock mutex. */ - __pci_reset_function_locked(dev); + pcistub_reset_device_state(dev); if (dev_data && pci_load_and_free_saved_state(dev, &dev_data->pci_saved_state)) dev_info(&dev->dev, "Could not reload PCI state\n"); @@ -284,7 +294,7 @@ void pcistub_put_pci_dev(struct pci_dev *dev) * (so it's ready for the next domain) */ device_lock_assert(&dev->dev); - __pci_reset_function_locked(dev); + pcistub_reset_device_state(dev); dev_data = pci_get_drvdata(dev); ret = pci_load_saved_state(dev, dev_data->pci_saved_state); @@ -420,7 +430,9 @@ static int pcistub_init_device(struct pci_dev *dev) dev_err(&dev->dev, "Could not store PCI conf saved state!\n"); else { dev_dbg(&dev->dev, "resetting (FLR, D3, etc) the device\n"); - __pci_reset_function_locked(dev); + err = pcistub_reset_device_state(dev); + if (err) + goto config_release; pci_restore_state(dev); } /* Now disable the device (this also ensures some private device diff --git a/include/xen/interface/physdev.h b/include/xen/interface/physdev.h index a237af867873..8609770e28f5 100644 --- a/include/xen/interface/physdev.h +++ b/include/xen/interface/physdev.h @@ -256,6 +256,13 @@ struct physdev_pci_device_add { */ #define PHYSDEVOP_prepare_msix 30 #define PHYSDEVOP_release_msix 31 +/* + * Notify the hypervisor that a PCI device has been reset, so that any + * internally cached state is regenerated. Should be called after any + * device reset performed by the hardware domain. + */ +#define PHYSDEVOP_pci_device_state_reset 32 + struct physdev_pci_device { /* IN */ uint16_t seg; diff --git a/include/xen/pci.h b/include/xen/pci.h index b8337cf85fd1..b2e2e856efd6 100644 --- a/include/xen/pci.h +++ b/include/xen/pci.h @@ -4,10 +4,16 @@ #define __XEN_PCI_H__ #if defined(CONFIG_XEN_DOM0) +int xen_reset_device_state(const struct pci_dev *dev); int xen_find_device_domain_owner(struct pci_dev *dev); int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain); int xen_unregister_device_domain_owner(struct pci_dev *dev); #else +static inline int xen_reset_device_state(const struct pci_dev *dev) +{ + return -1; +} + static inline int xen_find_device_domain_owner(struct pci_dev *dev) { return -1;
When device on dom0 side has been reset, the vpci on Xen side won't get notification, so that the cached state in vpci is all out of date with the real device state. To solve that problem, add a new function to clear all vpci device state when device is reset on dom0 side. And call that function in pcistub_init_device. Because when using "pci-assignable-add" to assign a passthrough device in Xen, it will reset passthrough device and the vpci state will out of date, and then device will fail to restore bar state. Co-developed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com> --- drivers/xen/pci.c | 12 ++++++++++++ drivers/xen/xen-pciback/pci_stub.c | 18 +++++++++++++++--- include/xen/interface/physdev.h | 7 +++++++ include/xen/pci.h | 6 ++++++ 4 files changed, 40 insertions(+), 3 deletions(-)