| Message ID | 20240306095651.4551-4-johan+linaro@kernel.org (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | d1997c98781459f7b6d0bf1858f538f48454a97b |
| Headers | show |
| Series | arm64: dts: qcom: sc8280xp: PCIe fixes and GICv3 ITS enable | expand |
On Wed, Mar 06, 2024 at 10:56:49AM +0100, Johan Hovold wrote: > Commit 9f4f3dfad8cf ("PCI: qcom: Enable ASPM for platforms supporting > 1.9.0 ops") started enabling ASPM unconditionally when the hardware > claims to support it. This triggers Correctable Errors for some PCIe > devices on machines like the Lenovo ThinkPad X13s when L0s is enabled, > which could indicate an incomplete driver ASPM implementation or that > the hardware does in fact not support L0s. > > This has now been confirmed by Qualcomm to be the case for sc8280xp and > its derivate platforms (e.g. sa8540p and sa8295p). Specifically, the PHY > configuration used on these platforms is not correctly tuned for L0s and > there is currently no updated configuration available. > > Add a new flag to the driver configuration data and use it to disable > ASPM L0s on sc8280xp, sa8540p and sa8295p for now. > > Note that only the 1.9.0 ops enable ASPM currently. > > Fixes: 9f4f3dfad8cf ("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops") > Cc: stable@vger.kernel.org # 6.7 > Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> - Mani > --- > drivers/pci/controller/dwc/pcie-qcom.c | 31 ++++++++++++++++++++++++-- > 1 file changed, 29 insertions(+), 2 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c > index 2ce2a3bd932b..9f83a1611a20 100644 > --- a/drivers/pci/controller/dwc/pcie-qcom.c > +++ b/drivers/pci/controller/dwc/pcie-qcom.c > @@ -229,6 +229,7 @@ struct qcom_pcie_ops { > > struct qcom_pcie_cfg { > const struct qcom_pcie_ops *ops; > + bool no_l0s; > }; > > struct qcom_pcie { > @@ -272,6 +273,26 @@ static int qcom_pcie_start_link(struct dw_pcie *pci) > return 0; > } > > +static void qcom_pcie_clear_aspm_l0s(struct dw_pcie *pci) > +{ > + struct qcom_pcie *pcie = to_qcom_pcie(pci); > + u16 offset; > + u32 val; > + > + if (!pcie->cfg->no_l0s) > + return; > + > + offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); > + > + dw_pcie_dbi_ro_wr_en(pci); > + > + val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP); > + val &= ~PCI_EXP_LNKCAP_ASPM_L0S; > + writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP); > + > + dw_pcie_dbi_ro_wr_dis(pci); > +} > + > static void qcom_pcie_clear_hpc(struct dw_pcie *pci) > { > u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); > @@ -961,6 +982,7 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) > > static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie) > { > + qcom_pcie_clear_aspm_l0s(pcie->pci); > qcom_pcie_clear_hpc(pcie->pci); > > return 0; > @@ -1358,6 +1380,11 @@ static const struct qcom_pcie_cfg cfg_2_9_0 = { > .ops = &ops_2_9_0, > }; > > +static const struct qcom_pcie_cfg cfg_sc8280xp = { > + .ops = &ops_1_9_0, > + .no_l0s = true, > +}; > + > static const struct dw_pcie_ops dw_pcie_ops = { > .link_up = qcom_pcie_link_up, > .start_link = qcom_pcie_start_link, > @@ -1629,11 +1656,11 @@ static const struct of_device_id qcom_pcie_match[] = { > { .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 }, > { .compatible = "qcom,pcie-msm8996", .data = &cfg_2_3_2 }, > { .compatible = "qcom,pcie-qcs404", .data = &cfg_2_4_0 }, > - { .compatible = "qcom,pcie-sa8540p", .data = &cfg_1_9_0 }, > + { .compatible = "qcom,pcie-sa8540p", .data = &cfg_sc8280xp }, > { .compatible = "qcom,pcie-sa8775p", .data = &cfg_1_9_0}, > { .compatible = "qcom,pcie-sc7280", .data = &cfg_1_9_0 }, > { .compatible = "qcom,pcie-sc8180x", .data = &cfg_1_9_0 }, > - { .compatible = "qcom,pcie-sc8280xp", .data = &cfg_1_9_0 }, > + { .compatible = "qcom,pcie-sc8280xp", .data = &cfg_sc8280xp }, > { .compatible = "qcom,pcie-sdm845", .data = &cfg_2_7_0 }, > { .compatible = "qcom,pcie-sdx55", .data = &cfg_1_9_0 }, > { .compatible = "qcom,pcie-sm8150", .data = &cfg_1_9_0 }, > -- > 2.43.0 >
On Wed, Mar 06, 2024 at 10:56:49AM +0100, Johan Hovold wrote: > Commit 9f4f3dfad8cf ("PCI: qcom: Enable ASPM for platforms supporting > 1.9.0 ops") started enabling ASPM unconditionally when the hardware > claims to support it. This triggers Correctable Errors for some PCIe > devices on machines like the Lenovo ThinkPad X13s when L0s is enabled, > which could indicate an incomplete driver ASPM implementation or that > the hardware does in fact not support L0s. > > This has now been confirmed by Qualcomm to be the case for sc8280xp and > its derivate platforms (e.g. sa8540p and sa8295p). Specifically, the PHY > configuration used on these platforms is not correctly tuned for L0s and > there is currently no updated configuration available. > > Add a new flag to the driver configuration data and use it to disable > ASPM L0s on sc8280xp, sa8540p and sa8295p for now. > > Note that only the 1.9.0 ops enable ASPM currently. > > Fixes: 9f4f3dfad8cf ("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops") > Cc: stable@vger.kernel.org # 6.7 > Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Regards, Bjorn
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 2ce2a3bd932b..9f83a1611a20 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -229,6 +229,7 @@ struct qcom_pcie_ops { struct qcom_pcie_cfg { const struct qcom_pcie_ops *ops; + bool no_l0s; }; struct qcom_pcie { @@ -272,6 +273,26 @@ static int qcom_pcie_start_link(struct dw_pcie *pci) return 0; } +static void qcom_pcie_clear_aspm_l0s(struct dw_pcie *pci) +{ + struct qcom_pcie *pcie = to_qcom_pcie(pci); + u16 offset; + u32 val; + + if (!pcie->cfg->no_l0s) + return; + + offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); + + dw_pcie_dbi_ro_wr_en(pci); + + val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP); + val &= ~PCI_EXP_LNKCAP_ASPM_L0S; + writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP); + + dw_pcie_dbi_ro_wr_dis(pci); +} + static void qcom_pcie_clear_hpc(struct dw_pcie *pci) { u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); @@ -961,6 +982,7 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie) { + qcom_pcie_clear_aspm_l0s(pcie->pci); qcom_pcie_clear_hpc(pcie->pci); return 0; @@ -1358,6 +1380,11 @@ static const struct qcom_pcie_cfg cfg_2_9_0 = { .ops = &ops_2_9_0, }; +static const struct qcom_pcie_cfg cfg_sc8280xp = { + .ops = &ops_1_9_0, + .no_l0s = true, +}; + static const struct dw_pcie_ops dw_pcie_ops = { .link_up = qcom_pcie_link_up, .start_link = qcom_pcie_start_link, @@ -1629,11 +1656,11 @@ static const struct of_device_id qcom_pcie_match[] = { { .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 }, { .compatible = "qcom,pcie-msm8996", .data = &cfg_2_3_2 }, { .compatible = "qcom,pcie-qcs404", .data = &cfg_2_4_0 }, - { .compatible = "qcom,pcie-sa8540p", .data = &cfg_1_9_0 }, + { .compatible = "qcom,pcie-sa8540p", .data = &cfg_sc8280xp }, { .compatible = "qcom,pcie-sa8775p", .data = &cfg_1_9_0}, { .compatible = "qcom,pcie-sc7280", .data = &cfg_1_9_0 }, { .compatible = "qcom,pcie-sc8180x", .data = &cfg_1_9_0 }, - { .compatible = "qcom,pcie-sc8280xp", .data = &cfg_1_9_0 }, + { .compatible = "qcom,pcie-sc8280xp", .data = &cfg_sc8280xp }, { .compatible = "qcom,pcie-sdm845", .data = &cfg_2_7_0 }, { .compatible = "qcom,pcie-sdx55", .data = &cfg_1_9_0 }, { .compatible = "qcom,pcie-sm8150", .data = &cfg_1_9_0 },
Commit 9f4f3dfad8cf ("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops") started enabling ASPM unconditionally when the hardware claims to support it. This triggers Correctable Errors for some PCIe devices on machines like the Lenovo ThinkPad X13s when L0s is enabled, which could indicate an incomplete driver ASPM implementation or that the hardware does in fact not support L0s. This has now been confirmed by Qualcomm to be the case for sc8280xp and its derivate platforms (e.g. sa8540p and sa8295p). Specifically, the PHY configuration used on these platforms is not correctly tuned for L0s and there is currently no updated configuration available. Add a new flag to the driver configuration data and use it to disable ASPM L0s on sc8280xp, sa8540p and sa8295p for now. Note that only the 1.9.0 ops enable ASPM currently. Fixes: 9f4f3dfad8cf ("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops") Cc: stable@vger.kernel.org # 6.7 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> --- drivers/pci/controller/dwc/pcie-qcom.c | 31 ++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-)