From patchwork Wed Mar 27 12:24:40 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Conor Dooley X-Patchwork-Id: 13606314 X-Patchwork-Delegate: kw@linux.com Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id EDC7A181CE2; Wed, 27 Mar 2024 12:25:20 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1711542321; cv=none; b=HGIrGTL4DY5oYYjEB5kcDCVV1qq80/la0SoSXsEDp4iyS4uWARFc/mJVVHrZfFvXJ6Tua2yHwxD4kF7cYxltxq3xkDIbh6w1GRZzMPzTwDYhfNwuF4L6TFu9vqtN1Hc8Ke2YoSeUwpGc8oqLWQ2/um/qZ/B9wUob1qbjNeACfGE= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1711542321; c=relaxed/simple; bh=Fi5YANMykhXfh/CWBHTWx+veKXkxaKsp6BEQ+wOOAdk=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=ru+DrK+1ywPqszQl75Gry02bMeM3zAu09Bt3i7IjaG7szMSL7XaFDGjrxwsPCMMmbP+T39cRinpkudfPqodrTvjqt90uGVECQZAl/EIJcckMcCnGo9x7kPIO1Tv/ojttANTg6Fw0aMymUaraGJWzLLmvmzO70/qPx/FYFbXFDnI= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=BE6DnJ3z; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="BE6DnJ3z" Received: by smtp.kernel.org (Postfix) with ESMTPSA id 85912C43601; Wed, 27 Mar 2024 12:25:17 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1711542320; bh=Fi5YANMykhXfh/CWBHTWx+veKXkxaKsp6BEQ+wOOAdk=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=BE6DnJ3zQ940NFCKlMHYxj5eF9TXRc1Le2NrUQRMiw2Cd3KfJ5zMK/6fYjXSPVehI zRm88FyCd0hBvDlr6IfDOWyRZDqCQ9OrbbR4X2mWqg4J8xhE7GuBTfh3lnwn+H1Tid 7r9GuyFwt4v+5KSpsnqfohxsssbGUTWCEgjpeHwT8qxGy4qj+tguWyWs/gIpDDH0F4 LrSu5HTLq5JRpT3mKeMjJK8NlBaZvSFW4sMqup7+wALbnXk+fOZ8oZAvt4xPxZRV37 Xb/by73t9T/2L8HkiO79S0/lbjKQfBOcRnKr3I3Sr6fgLFjTO9JqyXnUJq2ks2RfQn r024H5GsnRovQ== From: Conor Dooley To: linux-riscv@lists.infradead.org Cc: conor@kernel.org, Conor Dooley , Daire McNamara , Jamie Gibbons , Valentina Fernandez , Linus Walleij , Bartosz Golaszewski , Rob Herring , Krzysztof Kozlowski , Lorenzo Pieralisi , =?utf-8?q?Krzysztof_Wilczy=C5=84?= =?utf-8?q?ski?= , Bjorn Helgaas , linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org Subject: [PATCH v1 5/5] riscv: dts: microchip: add an initial devicetree for the BeagleV Fire Date: Wed, 27 Mar 2024 12:24:40 +0000 Message-ID: <20240327-hurry-escapable-e3212bf3cdd8@spud> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240327-parkway-dodgy-f0fe1fa20892@spud> References: <20240327-parkway-dodgy-f0fe1fa20892@spud> Precedence: bulk X-Mailing-List: linux-pci@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Developer-Signature: v=1; a=openpgp-sha256; l=10766; i=conor.dooley@microchip.com; h=from:subject:message-id; bh=VzkOrHaeB0MJo+Fuu8Q8iocE4H/HvHELUhz5DPz+Uls=; b=owGbwMvMwCFWscWwfUFT0iXG02pJDGksAmyZ0wrjJVa9PrtY7bqA8CefW9NY3iu4hUytzBRXf H6HbeG9jlIWBjEOBlkxRZbE230tUuv/uOxw7nkLM4eVCWQIAxenAEzkRjnDP8UZWr+YD6z5dHfu miq7+znRDZkGm0xmnfxWq12yzFSX8Qwjw4VbweqZ32/0BPwI+HfhhLZV79wA/2Xck60uxmr8bA7 k5AMA X-Developer-Key: i=conor.dooley@microchip.com; a=openpgp; fpr=F9ECA03CF54F12CD01F1655722E2C55B37CF380C From: Conor Dooley Add an initial devicetree for the BeagleV Fire. This devicetree differs from that in the BeagleBoard BSP as it has a different memory configuration, however it will boot on the same FPGA images. PCI is disabled for now, as the Linux PCI driver (and the binding) assume which root port instance is in use. This will need to be fixed before PCI can be enabled. Link: https://www.beagleboard.org/boards/beaglev-fire Co-developed-by: Jamie Gibbons Signed-off-by: Jamie Gibbons Signed-off-by: Conor Dooley --- arch/riscv/boot/dts/microchip/Makefile | 1 + .../microchip/mpfs-beaglev-fire-fabric.dtsi | 124 ++++++++++ .../boot/dts/microchip/mpfs-beaglev-fire.dts | 223 ++++++++++++++++++ 3 files changed, 348 insertions(+) create mode 100644 arch/riscv/boot/dts/microchip/mpfs-beaglev-fire-fabric.dtsi create mode 100644 arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile index e177815bf1a2..f51aeeb9fd3b 100644 --- a/arch/riscv/boot/dts/microchip/Makefile +++ b/arch/riscv/boot/dts/microchip/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-beaglev-fire.dtb dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-m100pfsevp.dtb dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb diff --git a/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire-fabric.dtsi new file mode 100644 index 000000000000..0abd0dc540be --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire-fabric.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/ { + fabric_clk3: fabric-clk3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + fabric_clk1: fabric-clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + fabric-bus@40000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x40000000 0x0 0x40000000 0x0 0x20000000>, /* FIC3-FAB */ + <0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>, /* FIC0, LO */ + <0x0 0xe0000000 0x0 0xe0000000 0x0 0x20000000>, /* FIC1, LO */ + <0x20 0x0 0x20 0x0 0x10 0x0>, /* FIC0,HI */ + <0x30 0x0 0x30 0x0 0x10 0x0>; /* FIC1,HI */ + + cape_gpios_p8: gpio@41100000 { + compatible = "microchip,coregpio-rtl-v3"; + reg = <0x0 0x41100000 0x0 0x1000>; + clocks = <&fabric_clk3>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <16>; + gpio-line-names = "P8_PIN31", "P8_PIN32", "P8_PIN33", "P8_PIN34", + "P8_PIN35", "P8_PIN36", "P8_PIN37", "P8_PIN38", + "P8_PIN39", "P8_PIN40", "P8_PIN41", "P8_PIN42", + "P8_PIN43", "P8_PIN44", "P8_PIN45", "P8_PIN46"; + }; + + cape_gpios_p9: gpio@41200000 { + compatible = "microchip,coregpio-rtl-v3"; + reg = <0x0 0x41200000 0x0 0x1000>; + clocks = <&fabric_clk3>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <20>; + gpio-line-names = "P9_PIN11", "P9_PIN12", "P9_PIN13", "P9_PIN14", + "P9_PIN15", "P9_PIN16", "P9_PIN17", "P9_PIN18", + "P9_PIN21", "P9_PIN22", "P9_PIN23", "P9_PIN24", + "P9_PIN25", "P9_PIN26", "P9_PIN27", "P9_PIN28", + "P9_PIN29", "P9_PIN31", "P9_PIN41", "P9_PIN42"; + }; + + hsi_gpios: gpio@44000000 { + compatible = "microchip,coregpio-rtl-v3"; + reg = <0x0 0x44000000 0x0 0x1000>; + clocks = <&fabric_clk3>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <20>; + gpio-line-names = "B0_HSIO70N", "B0_HSIO71N", "B0_HSIO83N", + "B0_HSIO73N_C2P_CLKN", "B0_HSIO70P", "B0_HSIO71P", + "B0_HSIO83P", "B0_HSIO73N_C2P_CLKP", "XCVR1_RX_VALID", + "XCVR1_LOCK", "XCVR1_ERROR", "XCVR2_RX_VALID", + "XCVR2_LOCK", "XCVR2_ERROR", "XCVR3_RX_VALID", + "XCVR3_LOCK", "XCVR3_ERROR", "XCVR_0B_REF_CLK_PLL_LOCK", + "XCVR_0C_REF_CLK_PLL_LOCK", "B0_HSIO81N"; + }; + }; + + fabric-pcie-bus@3000000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x40000000 0x0 0x40000000 0x0 0x20000000>, + <0x30 0x0 0x30 0x0 0x10 0x0>; + + pcie: pcie@3000000000 { + compatible = "microchip,pcie-host-1.0"; + #address-cells = <0x3>; + #interrupt-cells = <0x1>; + #size-cells = <0x2>; + device_type = "pci"; + reg = <0x30 0x0 0x0 0x8000000>, + <0x0 0x43000000 0x0 0x10000>; + reg-names = "cfg", "apb"; + bus-range = <0x0 0x7f>; + interrupt-parent = <&plic>; + interrupts = <119>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + interrupt-map-mask = <0 0 0 7>; + clocks = <&ccc_nw CLK_CCC_PLL0_OUT1>, + <&ccc_nw CLK_CCC_PLL0_OUT3>; + clock-names = "fic1", "fic3"; + ranges = <0x43000000 0x0 0x9000000 0x30 0x9000000 0x0 0xf000000>, + <0x1000000 0x0 0x8000000 0x30 0x8000000 0x0 0x1000000>, + <0x3000000 0x0 0x18000000 0x30 0x18000000 0x0 0x70000000>; + msi-parent = <&pcie>; + msi-controller; + status = "disabled"; + + pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + }; + + refclk_ccc: cccrefclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; +}; + +&ccc_nw { + clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, + <&refclk_ccc>, <&refclk_ccc>; + clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1", + "dll0_ref", "dll1_ref"; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts new file mode 100644 index 000000000000..47cf693beb68 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts @@ -0,0 +1,223 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2021 Microchip Technology Inc */ + +/dts-v1/; + +#include +#include "mpfs.dtsi" +#include "mpfs-beaglev-fire-fabric.dtsi" + +/* Clock frequency (in Hz) of MTIMER */ +#define MTIMER_FREQ 1000000 + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "BeagleBoard BeagleV-Fire"; + compatible = "beagle,beaglev-fire", "microchip,mpfs"; + + aliases { + serial0 = &mmuart0; + serial1 = &mmuart1; + serial2 = &mmuart2; + serial3 = &mmuart3; + serial4 = &mmuart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + timebase-frequency = ; + }; + + ddrc_cache_lo: memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; + status = "okay"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hss: hss-buffer@103fc00000 { + compatible = "shared-dma-pool"; + reg = <0x10 0x3fc00000 0x0 0x400000>; + no-map; + }; + }; + + imx219_clk: camera-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + imx219_vana: fixedregulator-0 { + compatible = "regulator-fixed"; + regulator-name = "imx219_vana"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + imx219_vdig: fixedregulator-1 { + compatible = "regulator-fixed"; + regulator-name = "imx219_vdig"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + imx219_vddl: fixedregulator-2 { + compatible = "regulator-fixed"; + regulator-name = "imx219_vddl"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + +}; + +&gpio2 { + interrupts = <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>; + ngpios=<32>; + gpio-line-names = "P8_PIN3_USER_LED_0", "P8_PIN4_USER_LED_1", "P8_PIN5_USER_LED_2", + "P8_PIN6_USER_LED_3", "P8_PIN7_USER_LED_4", "P8_PIN8_USER_LED_5", + "P8_PIN9_USER_LED_6", "P8_PIN10_USER_LED_7", "P8_PIN11_USER_LED_8", + "P8_PIN12_USER_LED_9", "P8_PIN13_USER_LED_10", "P8_PIN14_USER_LED_11", + "P8_PIN15", "P8_PIN16", "P8_PIN17", "P8_PIN18", "P8_PIN19", "P8_PIN20", + "P8_PIN21", "P8_PIN22", "P8_PIN23", "P8_PIN24", "P8_PIN25", "P8_PIN26", + "P8_PIN27", "P8_PIN28", "P8_PIN29", "P8_PIN30", "M2_W_DISABLE1", + "M2_W_DISABLE2", "VIO_ENABLE", "SD_DET"; + status = "okay"; + + vio-enable-hog { + gpio-hog; + gpios = <30 30>; + output-high; + line-name = "VIO_ENABLE"; + }; + + sd-det-hog { + gpio-hog; + gpios = <31 31>; + input; + line-name = "SD_DET"; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + + imx219: sensor@10 { + compatible = "sony,imx219"; + reg = <0x10>; + clocks = <&imx219_clk>; + VANA-supply = <&imx219_vana>; /* 2.8v */ + VDIG-supply = <&imx219_vdig>; /* 1.8v */ + VDDL-supply = <&imx219_vddl>; /* 1.2v */ + + port { + imx219_0: endpoint { + data-lanes = <1 2>; + clock-noncontinuous; + link-frequencies = /bits/ 64 <456000000>; + }; + }; + }; +}; + +&mac0 { + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&phy0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&mbox { + status = "okay"; +}; + +&mmc { + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&mmuart0 { + status = "okay"; +}; + +&mmuart1 { + status = "okay"; +}; + +&refclk { + clock-frequency = <125000000>; +}; + +&refclk_ccc { + clock-frequency = <50000000>; +}; + +&rtc { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&syscontroller { + microchip,bitstream-flash = <&sys_ctrl_flash>; + status = "okay"; +}; + +&syscontroller_qspi { + status = "okay"; + + sys_ctrl_flash: flash@0 { // MT25QL01GBBB8ESF-0SIT + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <1>; + reg = <0>; + }; +}; + +&usb { + status = "okay"; + dr_mode = "otg"; +};