@@ -461,6 +461,12 @@ static int rockchip_pcie_ep_start(struct pci_epc *epc)
rockchip_pcie_write(rockchip, cfg, PCIE_CORE_PHY_FUNC_CFG);
+ /* Enable configuration and start link training */
+ rockchip_pcie_write(rockchip,
+ PCIE_CLIENT_LINK_TRAIN_ENABLE |
+ PCIE_CLIENT_CONF_ENABLE,
+ PCIE_CLIENT_CONFIG);
+
return 0;
}
@@ -539,7 +545,6 @@ static int rockchip_pcie_ep_get_resources(struct rockchip_pcie_ep *ep)
ep->ob_addr = devm_kcalloc(dev, ep->max_regions, sizeof(*ep->ob_addr),
GFP_KERNEL);
-
if (!ep->ob_addr)
return -ENOMEM;
@@ -650,16 +655,9 @@ static int rockchip_pcie_ep_probe(struct platform_device *pdev)
rockchip_pcie_ep_hide_msix_cap(rockchip);
- /* Establish the link automatically */
- rockchip_pcie_write(rockchip, PCIE_CLIENT_LINK_TRAIN_ENABLE,
- PCIE_CLIENT_CONFIG);
-
/* Only enable function 0 by default */
rockchip_pcie_write(rockchip, BIT(0), PCIE_CORE_PHY_FUNC_CFG);
- rockchip_pcie_write(rockchip, PCIE_CLIENT_CONF_ENABLE,
- PCIE_CLIENT_CONFIG);
-
return 0;
err_release_resources:
rockchip_pcie_ep_release_resources(ep);
@@ -244,11 +244,12 @@ int rockchip_pcie_init_port(struct rockchip_pcie *rockchip)
rockchip_pcie_write(rockchip, PCIE_CLIENT_GEN_SEL_1,
PCIE_CLIENT_CONFIG);
- regs = PCIE_CLIENT_LINK_TRAIN_ENABLE | PCIE_CLIENT_ARI_ENABLE |
+ regs = PCIE_CLIENT_ARI_ENABLE |
PCIE_CLIENT_CONF_LANE_NUM(rockchip->lanes);
if (rockchip->is_rc)
- regs |= PCIE_CLIENT_CONF_ENABLE | PCIE_CLIENT_MODE_RC;
+ regs |= PCIE_CLIENT_LINK_TRAIN_ENABLE |
+ PCIE_CLIENT_CONF_ENABLE | PCIE_CLIENT_MODE_RC;
else
regs |= PCIE_CLIENT_CONF_DISABLE | PCIE_CLIENT_MODE_EP;
The function rockchip_pcie_init_port() enables link training for a controller configured in EP mode. Enabling link training is again done in rockchip_pcie_ep_probe() after that function executed rockchip_pcie_init_port(). Enabling link training only needs to be done once, and doing so at the probe stage before the controller is actually started by the user serves no purpose. Refactor this by removing the link training enablement from both rockchip_pcie_init_port() and rockchip_pcie_ep_probe() and moving it to the endpoint start operation defined with rockchip_pcie_ep_start(). Enabling the controller configuration using the PCIE_CLIENT_CONF_ENABLE bit in the same PCIE_CLIENT_CONFIG register is also move to rockchip_pcie_ep_start() and both the controller configuration and link training enable bits are set with a single call to rockchip_pcie_write(). Signed-off-by: Damien Le Moal <dlemoal@kernel.org> --- drivers/pci/controller/pcie-rockchip-ep.c | 14 ++++++-------- drivers/pci/controller/pcie-rockchip.c | 5 +++-- 2 files changed, 9 insertions(+), 10 deletions(-)