@@ -136,6 +136,41 @@ pcie3x4_intc: legacy-interrupt-controller {
};
};
+ pcie3x4_ep: pcie-ep@fe150000 {
+ compatible = "rockchip,rk3588-pcie-ep";
+ clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
+ <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
+ <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>;
+ clock-names = "aclk_mst", "aclk_slv",
+ "aclk_dbi", "pclk",
+ "aux", "pipe";
+ interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "sys", "pmc", "msg", "legacy", "err",
+ "dma0", "dma1", "dma2", "dma3";
+ max-link-speed = <3>;
+ num-lanes = <4>;
+ phys = <&pcie30phy>;
+ phy-names = "pcie-phy";
+ power-domains = <&power RK3588_PD_PCIE>;
+ reg = <0xa 0x40000000 0x0 0x00100000>,
+ <0xa 0x40100000 0x0 0x00100000>,
+ <0x0 0xfe150000 0x0 0x00010000>,
+ <0x9 0x00000000 0x0 0x40000000>,
+ <0xa 0x40300000 0x0 0x00100000>;
+ reg-names = "dbi", "dbi2", "apb", "addr_space", "atu";
+ resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
+ reset-names = "pwr", "pipe";
+ status = "disabled";
+ };
+
pcie3x2: pcie@fe160000 {
compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
#address-cells = <3>;
Add a device tree node representing PCIe endpoint mode. The controller can either be configured to run in Root Complex or Endpoint node. If a user wants to run the controller in endpoint mode, the user has to disable the pcie3x4 node and enable the pcie3x4_ep node. Signed-off-by: Niklas Cassel <cassel@kernel.org> --- arch/arm64/boot/dts/rockchip/rk3588.dtsi | 35 ++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)