@@ -216,10 +216,8 @@ static int hi3660_pcie_phy_start(struct hi3660_pcie_phy *phy)
usleep_range(PIPE_CLK_WAIT_MIN, PIPE_CLK_WAIT_MAX);
reg_val = kirin_apb_phy_readl(phy, PCIE_APB_PHY_STATUS0);
- if (reg_val & PIPE_CLK_STABLE) {
- dev_err(dev, "PIPE clk is not stable\n");
- return -EINVAL;
- }
+ if (reg_val & PIPE_CLK_STABLE)
+ return dev_err_probe(dev, -EINVAL, "PIPE clk is not stable\n");
return 0;
}
@@ -371,10 +369,9 @@ static int kirin_pcie_get_gpio_enable(struct kirin_pcie *pcie,
if (ret < 0)
return 0;
- if (ret > MAX_PCI_SLOTS) {
- dev_err(dev, "Too many GPIO clock requests!\n");
- return -EINVAL;
- }
+ if (ret > MAX_PCI_SLOTS)
+ return dev_err_probe(dev, -EINVAL,
+ "Too many GPIO clock requests!\n");
pcie->n_gpio_clkreq = ret;
@@ -384,7 +381,7 @@ static int kirin_pcie_get_gpio_enable(struct kirin_pcie *pcie,
GPIOD_OUT_LOW);
if (IS_ERR(pcie->id_clkreq_gpio[i]))
return dev_err_probe(dev, PTR_ERR(pcie->id_clkreq_gpio[i]),
- "unable to get a valid clken gpio\n");
+ "Unable to get a valid clken gpio\n");
pcie->clkreq_names[i] = devm_kasprintf(dev, GFP_KERNEL,
"pcie_clkreq_%d", i);
@@ -417,20 +414,17 @@ static int kirin_pcie_parse_port(struct kirin_pcie *pcie,
if (PTR_ERR(pcie->id_reset_gpio[i]) == -ENOENT)
continue;
return dev_err_probe(dev, PTR_ERR(pcie->id_reset_gpio[i]),
- "unable to get a valid reset gpio\n");
+ "Unable to get a valid reset gpio\n");
}
pcie->num_slots++;
- if (pcie->num_slots > MAX_PCI_SLOTS) {
- dev_err(dev, "Too many PCI slots!\n");
- return -EINVAL;
- }
+ if (pcie->num_slots > MAX_PCI_SLOTS)
+ return dev_err_probe(dev, -EINVAL,
+ "Too many PCI slots!\n");
ret = of_pci_get_devfn(child);
- if (ret < 0) {
- dev_err(dev, "failed to parse devfn: %d\n", ret);
- return ret;
- }
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "Failed to parse devfn\n");
slot = PCI_SLOT(ret);
@@ -469,7 +463,7 @@ static long kirin_pcie_get_resource(struct kirin_pcie *kirin_pcie,
kirin_pcie->id_dwc_perst_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(kirin_pcie->id_dwc_perst_gpio))
return dev_err_probe(dev, PTR_ERR(kirin_pcie->id_dwc_perst_gpio),
- "unable to get a valid gpio pin\n");
+ "Unable to get a valid gpio pin\n");
gpiod_set_consumer_name(kirin_pcie->id_dwc_perst_gpio, "pcie_perst_bridge");
ret = kirin_pcie_get_gpio_enable(kirin_pcie, pdev);
@@ -729,16 +723,12 @@ static int kirin_pcie_probe(struct platform_device *pdev)
struct dw_pcie *pci;
int ret;
- if (!dev->of_node) {
- dev_err(dev, "NULL node\n");
- return -EINVAL;
- }
+ if (!dev->of_node)
+ return dev_err_probe(dev, -ENODEV, "OF node not found\n");
data = of_device_get_match_data(dev);
- if (!data) {
- dev_err(dev, "OF data missing\n");
- return -EINVAL;
- }
+ if (!data)
+ return dev_err_probe(dev, -EINVAL, "OF data missing\n");
kirin_pcie = devm_kzalloc(dev, sizeof(struct kirin_pcie), GFP_KERNEL);
if (!kirin_pcie)
dev_err_probe() is used in some probe error paths, yet the "dev_err() + return" pattern is used in some others. Use dev_err_probe() in all error paths with that construction. Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com> Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> --- drivers/pci/controller/dwc/pcie-kirin.c | 44 +++++++++++++-------------------- 1 file changed, 17 insertions(+), 27 deletions(-)