diff mbox series

[v4,06/12] PCI: brcmstb: PCI: brcmstb: Make HARD_DEBUG, INTR2_CPU_BASE offsets SoC-specific

Message ID 20240716213131.6036-7-james.quinlan@broadcom.com (mailing list archive)
State Superseded
Delegated to: Krzysztof Wilczyński
Headers show
Series PCI: brcnstb: Enable STB 7712 SOC | expand

Commit Message

Jim Quinlan July 16, 2024, 9:31 p.m. UTC 
Our HW design has again changed a register offset which used to be standard
for all Broadcom SOCs with PCIe cores.  This difference is now reconciled
for the registers HARD_DEBUG and INTR2_CPU_BASE.

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 39 ++++++++++++++++-----------
 1 file changed, 24 insertions(+), 15 deletions(-)

Comments

Manivannan Sadhasivam July 25, 2024, 4:43 a.m. UTC | #1 
On Tue, Jul 16, 2024 at 05:31:21PM -0400, Jim Quinlan wrote:
> Our HW design has again changed a register offset which used to be standard

Changed for which SoC? Please mention that this is a preparatory work.

> for all Broadcom SOCs with PCIe cores.  This difference is now reconciled
> for the registers HARD_DEBUG and INTR2_CPU_BASE.
> 
> Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>

With that,

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
> ---
>  drivers/pci/controller/pcie-brcmstb.c | 39 ++++++++++++++++-----------
>  1 file changed, 24 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index 4dc2ff7f3167..073d790d97b7 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -122,7 +122,6 @@
>  #define PCIE_MEM_WIN0_LIMIT_HI(win)	\
>  		PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI + ((win) * 8)
>  
> -#define PCIE_MISC_HARD_PCIE_HARD_DEBUG					0x4204
>  #define  PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK	0x2
>  #define  PCIE_MISC_HARD_PCIE_HARD_DEBUG_L1SS_ENABLE_MASK		0x200000
>  #define  PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK		0x08000000
> @@ -131,9 +130,9 @@
>  	  (PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK | \
>  	   PCIE_MISC_HARD_PCIE_HARD_DEBUG_L1SS_ENABLE_MASK)
>  
> -#define PCIE_INTR2_CPU_BASE		0x4300
>  #define PCIE_MSI_INTR2_BASE		0x4500
> -/* Offsets from PCIE_INTR2_CPU_BASE and PCIE_MSI_INTR2_BASE */
> +
> +/* Offsets from INTR2_CPU and MSI_INTR2 BASE offsets */
>  #define  MSI_INT_STATUS			0x0
>  #define  MSI_INT_CLR			0x8
>  #define  MSI_INT_MASK_SET		0x10
> @@ -184,9 +183,11 @@
>  #define SSC_STATUS_PLL_LOCK_MASK	0x800
>  #define PCIE_BRCM_MAX_MEMC		3
>  
> -#define IDX_ADDR(pcie)			(pcie->reg_offsets[EXT_CFG_INDEX])
> -#define DATA_ADDR(pcie)			(pcie->reg_offsets[EXT_CFG_DATA])
> -#define PCIE_RGR1_SW_INIT_1(pcie)	(pcie->reg_offsets[RGR1_SW_INIT_1])
> +#define IDX_ADDR(pcie)			((pcie)->reg_offsets[EXT_CFG_INDEX])
> +#define DATA_ADDR(pcie)			((pcie)->reg_offsets[EXT_CFG_DATA])
> +#define PCIE_RGR1_SW_INIT_1(pcie)	((pcie)->reg_offsets[RGR1_SW_INIT_1])
> +#define HARD_DEBUG(pcie)		((pcie)->reg_offsets[PCIE_HARD_DEBUG])
> +#define INTR2_CPU_BASE(pcie)		((pcie)->reg_offsets[PCIE_INTR2_CPU_BASE])
>  
>  /* Rescal registers */
>  #define PCIE_DVT_PMU_PCIE_PHY_CTRL				0xc700
> @@ -205,6 +206,8 @@ enum {
>  	RGR1_SW_INIT_1,
>  	EXT_CFG_INDEX,
>  	EXT_CFG_DATA,
> +	PCIE_HARD_DEBUG,
> +	PCIE_INTR2_CPU_BASE,
>  };
>  
>  enum {
> @@ -651,7 +654,7 @@ static int brcm_pcie_enable_msi(struct brcm_pcie *pcie)
>  	BUILD_BUG_ON(BRCM_INT_PCI_MSI_LEGACY_NR > BRCM_INT_PCI_MSI_NR);
>  
>  	if (msi->legacy) {
> -		msi->intr_base = msi->base + PCIE_INTR2_CPU_BASE;
> +		msi->intr_base = msi->base + INTR2_CPU_BASE(pcie);
>  		msi->nr = BRCM_INT_PCI_MSI_LEGACY_NR;
>  		msi->legacy_shift = 24;
>  	} else {
> @@ -898,12 +901,12 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
>  	/* Take the bridge out of reset */
>  	pcie->bridge_sw_init_set(pcie, 0);
>  
> -	tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
> +	tmp = readl(base + HARD_DEBUG(pcie));
>  	if (is_bmips(pcie))
>  		tmp &= ~PCIE_BMIPS_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK;
>  	else
>  		tmp &= ~PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK;
> -	writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
> +	writel(tmp, base + HARD_DEBUG(pcie));
>  	/* Wait for SerDes to be stable */
>  	usleep_range(100, 200);
>  
> @@ -1072,7 +1075,7 @@ static void brcm_config_clkreq(struct brcm_pcie *pcie)
>  	}
>  
>  	/* Start out assuming safe mode (both mode bits cleared) */
> -	clkreq_cntl = readl(pcie->base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
> +	clkreq_cntl = readl(pcie->base + HARD_DEBUG(pcie));
>  	clkreq_cntl &= ~PCIE_CLKREQ_MASK;
>  
>  	if (strcmp(mode, "no-l1ss") == 0) {
> @@ -1115,7 +1118,7 @@ static void brcm_config_clkreq(struct brcm_pcie *pcie)
>  			dev_err(pcie->dev, err_msg);
>  		mode = "safe";
>  	}
> -	writel(clkreq_cntl, pcie->base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
> +	writel(clkreq_cntl, pcie->base + HARD_DEBUG(pcie));
>  
>  	dev_info(pcie->dev, "clkreq-mode set to %s\n", mode);
>  }
> @@ -1337,9 +1340,9 @@ static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
>  	writel(tmp, base + PCIE_MISC_PCIE_CTRL);
>  
>  	/* Turn off SerDes */
> -	tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
> +	tmp = readl(base + HARD_DEBUG(pcie));
>  	u32p_replace_bits(&tmp, 1, PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
> -	writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
> +	writel(tmp, base + HARD_DEBUG(pcie));
>  
>  	/* Shutdown PCIe bridge */
>  	pcie->bridge_sw_init_set(pcie, 1);
> @@ -1425,9 +1428,9 @@ static int brcm_pcie_resume_noirq(struct device *dev)
>  	pcie->bridge_sw_init_set(pcie, 0);
>  
>  	/* SERDES_IDDQ = 0 */
> -	tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
> +	tmp = readl(base + HARD_DEBUG(pcie));
>  	u32p_replace_bits(&tmp, 0, PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
> -	writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
> +	writel(tmp, base + HARD_DEBUG(pcie));
>  
>  	/* wait for serdes to be stable */
>  	udelay(100);
> @@ -1499,12 +1502,16 @@ static const int pcie_offsets[] = {
>  	[RGR1_SW_INIT_1] = 0x9210,
>  	[EXT_CFG_INDEX]  = 0x9000,
>  	[EXT_CFG_DATA]   = 0x9004,
> +	[PCIE_HARD_DEBUG] = 0x4204,
> +	[PCIE_INTR2_CPU_BASE] = 0x4300,
>  };
>  
>  static const int pcie_offsets_bmips_7425[] = {
>  	[RGR1_SW_INIT_1] = 0x8010,
>  	[EXT_CFG_INDEX]  = 0x8300,
>  	[EXT_CFG_DATA]   = 0x8304,
> +	[PCIE_HARD_DEBUG] = 0x4204,
> +	[PCIE_INTR2_CPU_BASE] = 0x4300,
>  };
>  
>  static const struct pcie_cfg_data generic_cfg = {
> @@ -1539,6 +1546,8 @@ static const int pcie_offset_bcm7278[] = {
>  	[RGR1_SW_INIT_1] = 0xc010,
>  	[EXT_CFG_INDEX] = 0x9000,
>  	[EXT_CFG_DATA] = 0x9004,
> +	[PCIE_HARD_DEBUG] = 0x4204,
> +	[PCIE_INTR2_CPU_BASE] = 0x4300,
>  };
>  
>  static const struct pcie_cfg_data bcm7278_cfg = {
> -- 
> 2.17.1
>
diff mbox series

Patch

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 4dc2ff7f3167..073d790d97b7 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -122,7 +122,6 @@ 
 #define PCIE_MEM_WIN0_LIMIT_HI(win)	\
 		PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI + ((win) * 8)
 
-#define PCIE_MISC_HARD_PCIE_HARD_DEBUG					0x4204
 #define  PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK	0x2
 #define  PCIE_MISC_HARD_PCIE_HARD_DEBUG_L1SS_ENABLE_MASK		0x200000
 #define  PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK		0x08000000
@@ -131,9 +130,9 @@ 
 	  (PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK | \
 	   PCIE_MISC_HARD_PCIE_HARD_DEBUG_L1SS_ENABLE_MASK)
 
-#define PCIE_INTR2_CPU_BASE		0x4300
 #define PCIE_MSI_INTR2_BASE		0x4500
-/* Offsets from PCIE_INTR2_CPU_BASE and PCIE_MSI_INTR2_BASE */
+
+/* Offsets from INTR2_CPU and MSI_INTR2 BASE offsets */
 #define  MSI_INT_STATUS			0x0
 #define  MSI_INT_CLR			0x8
 #define  MSI_INT_MASK_SET		0x10
@@ -184,9 +183,11 @@ 
 #define SSC_STATUS_PLL_LOCK_MASK	0x800
 #define PCIE_BRCM_MAX_MEMC		3
 
-#define IDX_ADDR(pcie)			(pcie->reg_offsets[EXT_CFG_INDEX])
-#define DATA_ADDR(pcie)			(pcie->reg_offsets[EXT_CFG_DATA])
-#define PCIE_RGR1_SW_INIT_1(pcie)	(pcie->reg_offsets[RGR1_SW_INIT_1])
+#define IDX_ADDR(pcie)			((pcie)->reg_offsets[EXT_CFG_INDEX])
+#define DATA_ADDR(pcie)			((pcie)->reg_offsets[EXT_CFG_DATA])
+#define PCIE_RGR1_SW_INIT_1(pcie)	((pcie)->reg_offsets[RGR1_SW_INIT_1])
+#define HARD_DEBUG(pcie)		((pcie)->reg_offsets[PCIE_HARD_DEBUG])
+#define INTR2_CPU_BASE(pcie)		((pcie)->reg_offsets[PCIE_INTR2_CPU_BASE])
 
 /* Rescal registers */
 #define PCIE_DVT_PMU_PCIE_PHY_CTRL				0xc700
@@ -205,6 +206,8 @@  enum {
 	RGR1_SW_INIT_1,
 	EXT_CFG_INDEX,
 	EXT_CFG_DATA,
+	PCIE_HARD_DEBUG,
+	PCIE_INTR2_CPU_BASE,
 };
 
 enum {
@@ -651,7 +654,7 @@  static int brcm_pcie_enable_msi(struct brcm_pcie *pcie)
 	BUILD_BUG_ON(BRCM_INT_PCI_MSI_LEGACY_NR > BRCM_INT_PCI_MSI_NR);
 
 	if (msi->legacy) {
-		msi->intr_base = msi->base + PCIE_INTR2_CPU_BASE;
+		msi->intr_base = msi->base + INTR2_CPU_BASE(pcie);
 		msi->nr = BRCM_INT_PCI_MSI_LEGACY_NR;
 		msi->legacy_shift = 24;
 	} else {
@@ -898,12 +901,12 @@  static int brcm_pcie_setup(struct brcm_pcie *pcie)
 	/* Take the bridge out of reset */
 	pcie->bridge_sw_init_set(pcie, 0);
 
-	tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+	tmp = readl(base + HARD_DEBUG(pcie));
 	if (is_bmips(pcie))
 		tmp &= ~PCIE_BMIPS_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK;
 	else
 		tmp &= ~PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK;
-	writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+	writel(tmp, base + HARD_DEBUG(pcie));
 	/* Wait for SerDes to be stable */
 	usleep_range(100, 200);
 
@@ -1072,7 +1075,7 @@  static void brcm_config_clkreq(struct brcm_pcie *pcie)
 	}
 
 	/* Start out assuming safe mode (both mode bits cleared) */
-	clkreq_cntl = readl(pcie->base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+	clkreq_cntl = readl(pcie->base + HARD_DEBUG(pcie));
 	clkreq_cntl &= ~PCIE_CLKREQ_MASK;
 
 	if (strcmp(mode, "no-l1ss") == 0) {
@@ -1115,7 +1118,7 @@  static void brcm_config_clkreq(struct brcm_pcie *pcie)
 			dev_err(pcie->dev, err_msg);
 		mode = "safe";
 	}
-	writel(clkreq_cntl, pcie->base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+	writel(clkreq_cntl, pcie->base + HARD_DEBUG(pcie));
 
 	dev_info(pcie->dev, "clkreq-mode set to %s\n", mode);
 }
@@ -1337,9 +1340,9 @@  static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
 	writel(tmp, base + PCIE_MISC_PCIE_CTRL);
 
 	/* Turn off SerDes */
-	tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+	tmp = readl(base + HARD_DEBUG(pcie));
 	u32p_replace_bits(&tmp, 1, PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
-	writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+	writel(tmp, base + HARD_DEBUG(pcie));
 
 	/* Shutdown PCIe bridge */
 	pcie->bridge_sw_init_set(pcie, 1);
@@ -1425,9 +1428,9 @@  static int brcm_pcie_resume_noirq(struct device *dev)
 	pcie->bridge_sw_init_set(pcie, 0);
 
 	/* SERDES_IDDQ = 0 */
-	tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+	tmp = readl(base + HARD_DEBUG(pcie));
 	u32p_replace_bits(&tmp, 0, PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
-	writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
+	writel(tmp, base + HARD_DEBUG(pcie));
 
 	/* wait for serdes to be stable */
 	udelay(100);
@@ -1499,12 +1502,16 @@  static const int pcie_offsets[] = {
 	[RGR1_SW_INIT_1] = 0x9210,
 	[EXT_CFG_INDEX]  = 0x9000,
 	[EXT_CFG_DATA]   = 0x9004,
+	[PCIE_HARD_DEBUG] = 0x4204,
+	[PCIE_INTR2_CPU_BASE] = 0x4300,
 };
 
 static const int pcie_offsets_bmips_7425[] = {
 	[RGR1_SW_INIT_1] = 0x8010,
 	[EXT_CFG_INDEX]  = 0x8300,
 	[EXT_CFG_DATA]   = 0x8304,
+	[PCIE_HARD_DEBUG] = 0x4204,
+	[PCIE_INTR2_CPU_BASE] = 0x4300,
 };
 
 static const struct pcie_cfg_data generic_cfg = {
@@ -1539,6 +1546,8 @@  static const int pcie_offset_bcm7278[] = {
 	[RGR1_SW_INIT_1] = 0xc010,
 	[EXT_CFG_INDEX] = 0x9000,
 	[EXT_CFG_DATA] = 0x9004,
+	[PCIE_HARD_DEBUG] = 0x4204,
+	[PCIE_INTR2_CPU_BASE] = 0x4300,
 };
 
 static const struct pcie_cfg_data bcm7278_cfg = {