| Message ID | 20240719185513.3376321-1-kbusch@meta.com (mailing list archive) |
|---|---|
| State | Rejected |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
| Series | driver core: get kobject ref when accessing dev_attrs | expand |
On Fri, Jul 19, 2024 at 11:55:13AM -0700, Keith Busch wrote: > From: Keith Busch <kbusch@kernel.org> > > Get a reference to the device's kobject while storing and showing device > attributes so that the device is valid for the lifetime of the sysfs access. > Without this, the device may be released and use-after-free will occur. > > This is an easy problem to recreate with pci switches. Basic topology on a my > qemu test machine: > > -[0000:00]-+-00.0 Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller > +-01.0-[01-04]----00.0-[02-04]--+-00.0-[03]-- > \-01.0-[04]----00.0 Red Hat, Inc. Virtio block device > > Simultaneously remove devices 04:00.0 and 01:00.0 and you'll hit it: > > # echo 1 > /sys/bus/pci/devices/0000\:04\:00.0/remove & > # echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/remove So you remove the parent before the child and also want to remove the child at the same time? You are going to have bad problems here :) > Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b9b: 0000 [#1] PREEMPT SMP PTI > CPU: 9 PID: 359 Comm: bash Not tainted 6.10.0-rc1-00183-gea4516b2b250 #256 > Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-14-g1e1da7a96300-prebuilt.qemu.org 04/01/2014 > RIP: 0010:pci_stop_bus_device+0x15/0x90 > Code: 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 54 55 48 89 fd 53 4c 8b 67 18 4d 85 e4 74 2d <49> 8b 7c 24 30 49 83 c4 28 4c 39 e7 74 1f 48 8b 5f 08 e8 d4 ff ff > RSP: 0018:ffffc90000b67dd0 EFLAGS: 00010202 > RAX: 0000000000000000 RBX: ffff88800768c0c8 RCX: 0000000000000000 > RDX: 0000000000000000 RSI: ffffffff8365bc00 RDI: ffff88800768c000 > RBP: ffff88800768c000 R08: 0000000000000000 R09: 0000000000000000 > R10: ffffc90000b67df0 R11: 0000000000000003 R12: 6b6b6b6b6b6b6b6b > R13: ffffc90000b67e90 R14: ffff8880075bccc8 R15: ffff88801082a620 > FS: 00007fe0c951e740(0000) GS:ffff88803ea80000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 0000560aaac4b030 CR3: 00000000108ae004 CR4: 0000000000770ef0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > PKRU: 55555554 > Call Trace: > <TASK> > ? die_addr+0x37/0x90 > ? exc_general_protection+0x1e5/0x430 > ? asm_exc_general_protection+0x26/0x30 > ? pci_stop_bus_device+0x15/0x90 > pci_stop_and_remove_bus_device_locked+0x1a/0x30 > remove_store+0x7d/0x90 > kernfs_fop_write_iter+0x13c/0x200 > vfs_write+0x359/0x510 > ksys_write+0x69/0xf0 > do_syscall_64+0x68/0x140 > entry_SYSCALL_64_after_hwframe+0x76/0x7e > > Signed-off-by: Keith Busch <kbusch@kernel.org> > --- > drivers/base/core.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/base/core.c b/drivers/base/core.c > index 131d96c6090be..108f2aa6eaaa9 100644 > --- a/drivers/base/core.c > +++ b/drivers/base/core.c > @@ -2433,12 +2433,15 @@ static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr, > struct device *dev = kobj_to_dev(kobj); > ssize_t ret = -EIO; > > + if (!kobject_get_unless_zero(kobj)) > + return -ENXIO; We've been down this path before, and it doesn't end well from what I recall. Attributes that when written to remove themselves need to call the correct function to do so (look at how scsi does it). I think this change will now break that functionality. Look in the email archives a long time ago for more details, I can't recall them at the moment, sorry. thanks, greg k-h
On Sat, Jul 20, 2024 at 07:17:55AM +0200, Greg KH wrote: > On Fri, Jul 19, 2024 at 11:55:13AM -0700, Keith Busch wrote: > > From: Keith Busch <kbusch@kernel.org> > > > > Get a reference to the device's kobject while storing and showing device > > attributes so that the device is valid for the lifetime of the sysfs access. > > Without this, the device may be released and use-after-free will occur. > > > > This is an easy problem to recreate with pci switches. Basic topology on a my > > qemu test machine: > > > > -[0000:00]-+-00.0 Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller > > +-01.0-[01-04]----00.0-[02-04]--+-00.0-[03]-- > > \-01.0-[04]----00.0 Red Hat, Inc. Virtio block device > > > > Simultaneously remove devices 04:00.0 and 01:00.0 and you'll hit it: > > > > # echo 1 > /sys/bus/pci/devices/0000\:04\:00.0/remove & > > # echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/remove > > So you remove the parent before the child and also want to remove the > child at the same time? You are going to have bad problems here :) The example I provided is surely a user error, but it just demonstrates the issue. The parent device can be removed at any time without user action: hotplug and error handling take devices down automatically. And it's not just a problem when requesting to concurrently removing the child device; it's still a use-after-free from just accessing its attributes. > > @@ -2433,12 +2433,15 @@ static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr, > > struct device *dev = kobj_to_dev(kobj); > > ssize_t ret = -EIO; > > > > + if (!kobject_get_unless_zero(kobj)) > > + return -ENXIO; > > We've been down this path before, and it doesn't end well from what I > recall. Attributes that when written to remove themselves need to call > the correct function to do so (look at how scsi does it). I think this > change will now break that functionality. Look in the email archives a > long time ago for more details, I can't recall them at the moment, > sorry. Thanks for the suggestion. I'll try to figure out what scsi does and see if that strategy can work here.
diff --git a/drivers/base/core.c b/drivers/base/core.c index 131d96c6090be..108f2aa6eaaa9 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -2433,12 +2433,15 @@ static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr, struct device *dev = kobj_to_dev(kobj); ssize_t ret = -EIO; + if (!kobject_get_unless_zero(kobj)) + return -ENXIO; if (dev_attr->show) ret = dev_attr->show(dev, dev_attr, buf); if (ret >= (ssize_t)PAGE_SIZE) { printk("dev_attr_show: %pS returned bad count\n", dev_attr->show); } + kobject_put(kobj); return ret; } @@ -2449,8 +2452,11 @@ static ssize_t dev_attr_store(struct kobject *kobj, struct attribute *attr, struct device *dev = kobj_to_dev(kobj); ssize_t ret = -EIO; + if (!kobject_get_unless_zero(kobj)) + return -ENXIO; if (dev_attr->store) ret = dev_attr->store(dev, dev_attr, buf, count); + kobject_put(kobj); return ret; }