@@ -6982,6 +6982,7 @@ F: include/linux/kobj*
F: include/linux/property.h
F: lib/kobj*
F: rust/kernel/device.rs
+F: rust/kernel/driver.rs
DRIVERS FOR OMAP ADAPTIVE VOLTAGE SCALING (AVS)
M: Nishanth Menon <nm@ti.com>
new file mode 100644
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0
+
+//! Generic support for drivers of different buses (e.g., PCI, Platform, Amba, etc.).
+//!
+//! Each bus / subsystem is expected to implement [`RegistrationOps`], which allows drivers to
+//! register using the [`Registration`] class.
+
+use crate::error::{Error, Result};
+use crate::{init::PinInit, str::CStr, try_pin_init, types::Opaque, ThisModule};
+use core::pin::Pin;
+use macros::{pin_data, pinned_drop};
+
+/// The [`RegistrationOps`] trait serves as generic interface for subsystems (e.g., PCI, Platform,
+/// Amba, etc.) to privide the corresponding subsystem specific implementation to register /
+/// unregister a driver of the particular type (`RegType`).
+///
+/// For instance, the PCI subsystem would set `RegType` to `bindings::pci_driver` and call
+/// `bindings::__pci_register_driver` from `RegistrationOps::register` and
+/// `bindings::pci_unregister_driver` from `RegistrationOps::unregister`.
+pub trait RegistrationOps {
+ /// The type that holds information about the registration. This is typically a struct defined
+ /// by the C portion of the kernel.
+ type RegType: Default;
+
+ /// Registers a driver.
+ ///
+ /// On success, `reg` must remain pinned and valid until the matching call to
+ /// [`RegistrationOps::unregister`].
+ fn register(
+ reg: &mut Self::RegType,
+ name: &'static CStr,
+ module: &'static ThisModule,
+ ) -> Result;
+
+ /// Unregisters a driver previously registered with [`RegistrationOps::register`].
+ fn unregister(reg: &mut Self::RegType);
+}
+
+/// A [`Registration`] is a generic type that represents the registration of some driver type (e.g.
+/// `bindings::pci_driver`). Therefore a [`Registration`] must be initialized with a type that
+/// implements the [`RegistrationOps`] trait, such that the generic `T::register` and
+/// `T::unregister` calls result in the subsystem specific registration calls.
+///
+///Once the `Registration` structure is dropped, the driver is unregistered.
+#[pin_data(PinnedDrop)]
+pub struct Registration<T: RegistrationOps> {
+ #[pin]
+ reg: Opaque<T::RegType>,
+}
+
+// SAFETY: `Registration` has no fields or methods accessible via `&Registration`, so it is safe to
+// share references to it with multiple threads as nothing can be done.
+unsafe impl<T: RegistrationOps> Sync for Registration<T> {}
+
+// SAFETY: Both registration and unregistration are implemented in C and safe to be performed from
+// any thread, so `Registration` is `Send`.
+unsafe impl<T: RegistrationOps> Send for Registration<T> {}
+
+impl<T: RegistrationOps> Registration<T> {
+ /// Creates a new instance of the registration object.
+ pub fn new(name: &'static CStr, module: &'static ThisModule) -> impl PinInit<Self, Error> {
+ try_pin_init!(Self {
+ reg <- Opaque::try_ffi_init(|ptr: *mut T::RegType| {
+ // SAFETY: `try_ffi_init` guarantees that `ptr` is valid for write.
+ unsafe { ptr.write(T::RegType::default()) };
+
+ // SAFETY: `try_ffi_init` guarantees that `ptr` is valid for write, and it has
+ // just been initialised above, so it's also valid for read.
+ let drv = unsafe { &mut *ptr };
+
+ T::register(drv, name, module)
+ }),
+ })
+ }
+}
+
+#[pinned_drop]
+impl<T: RegistrationOps> PinnedDrop for Registration<T> {
+ fn drop(self: Pin<&mut Self>) {
+ // SAFETY: The existence of the `Registration` guarantees that `self.reg.get()` is properly
+ // aligned and points to a valid value.
+ let drv = unsafe { &mut *self.reg.get() };
+
+ T::unregister(drv);
+ }
+}
+
+/// A kernel module that only registers the given driver on init.
+///
+/// This is a helper struct to make it easier to define single-functionality modules, in this case,
+/// modules that offer a single driver.
+#[pin_data]
+pub struct Module<T: RegistrationOps> {
+ #[pin]
+ _driver: Registration<T>,
+}
+
+impl<T: RegistrationOps + Sync + Send> crate::InPlaceModule for Module<T> {
+ fn init(name: &'static CStr, module: &'static ThisModule) -> impl PinInit<Self, Error> {
+ try_pin_init!(Self {
+ _driver <- Registration::<T>::new(name, module),
+ })
+ }
+}
+
+/// Declares a kernel module that exposes a single driver.
+///
+/// It is meant to be used as a helper by other subsystems so they can more easily expose their own
+/// macros.
+#[macro_export]
+macro_rules! module_driver {
+ (<$gen_type:ident>, $driver_ops:ty, { type: $type:ty, $($f:tt)* }) => {
+ type Ops<$gen_type> = $driver_ops;
+ type ModuleType = $crate::driver::Module<Ops<$type>>;
+ $crate::prelude::module! {
+ type: ModuleType,
+ $($f)*
+ }
+ }
+}
@@ -32,6 +32,7 @@
pub mod block;
mod build_assert;
pub mod device;
+pub mod driver;
pub mod error;
#[cfg(CONFIG_RUST_FW_LOADER_ABSTRACTIONS)]
pub mod firmware;