| Message ID | 20241028084644.3778081-1-peng.fan@oss.nxp.com (mailing list archive) |
|---|---|
| State | New |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
| Series | PCI: check bridge->bus in pci_host_common_remove | expand |
On Mon, Oct 28, 2024 at 04:46:43PM +0800, Peng Fan (OSS) wrote: > From: Peng Fan <peng.fan@nxp.com> > > When PCI node was created using an overlay and the overlay is > reverted/destroyed, the "linux,pci-domain" property no longer exists, > so of_get_pci_domain_nr will return failure. Then > of_pci_bus_release_domain_nr will actually use the dynamic IDA, even > if the IDA was allocated in static IDA. So the flow is as below: > A: of_changeset_revert > pci_host_common_remove > pci_bus_release_domain_nr > of_pci_bus_release_domain_nr > of_get_pci_domain_nr # fails because overlay is gone > ida_free(&pci_domain_nr_dynamic_ida) > > With driver calls pci_host_common_remove explicity, the flow becomes: > B pci_host_common_remove > pci_bus_release_domain_nr > of_pci_bus_release_domain_nr > of_get_pci_domain_nr # succeeds in this order > ida_free(&pci_domain_nr_static_ida) > A of_changeset_revert > pci_host_common_remove > > With updated flow, the pci_host_common_remove will be called twice, > so need to check 'bridge->bus' to avoid accessing invalid pointer. > > Fixes: c14f7ccc9f5d ("PCI: Assign PCI domain IDs by ida_alloc()") > Signed-off-by: Peng Fan <peng.fan@nxp.com> I went through the previous discussion [1] and I couldn't see an agreement on the point raised by Bjorn on 'removing the host bridge before the overlay'. I do think this is a valid point and if you do not think so, please state the reason. - Mani [1] https://lore.kernel.org/lkml/20230913115737.GA426735@bhelgaas/ > --- > > V1: > Not sure to keep the fixes here. I could drop the Fixes tag if it is > improper. > This is to revisit the patch [1] which was rejected last year. This > new flow is using the suggest flow following Bjorn's suggestion. > But of_changeset_revert will still invoke plaform_remove and then > pci_host_common_remove. So worked out this patch together with a patch > to jailhouse driver as below: > static void destroy_vpci_of_overlay(void) > { > + struct device_node *vpci_node = NULL; > + > if (overlay_applied) { > +#if LINUX_VERSION_CODE >= KERNEL_VERSION(6,6,0) > + vpci_node = of_find_node_by_path("/pci@0"); > + if (vpci_node) { > + struct platform_device *pdev = of_find_device_by_node(vpci_node); > + if (!pdev) > + printk("Not found device for /pci@0\n"); > + else { > + pci_host_common_remove(pdev); > + platform_device_put(pdev); > + } > + } > + of_node_put(vpci_node); > +#endif > + > of_changeset_revert(&overlay_changeset); > > [1] https://lore.kernel.org/lkml/20230908224858.GA306960@bhelgaas/T/#md12e6097d91a012ede78c997fc5abf460029a569 > > drivers/pci/controller/pci-host-common.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/drivers/pci/controller/pci-host-common.c b/drivers/pci/controller/pci-host-common.c > index cf5f59a745b3..5a9c29fc57cd 100644 > --- a/drivers/pci/controller/pci-host-common.c > +++ b/drivers/pci/controller/pci-host-common.c > @@ -86,8 +86,10 @@ void pci_host_common_remove(struct platform_device *pdev) > struct pci_host_bridge *bridge = platform_get_drvdata(pdev); > > pci_lock_rescan_remove(); > - pci_stop_root_bus(bridge->bus); > - pci_remove_root_bus(bridge->bus); > + if (bridge->bus) { > + pci_stop_root_bus(bridge->bus); > + pci_remove_root_bus(bridge->bus); > + } > pci_unlock_rescan_remove(); > } > EXPORT_SYMBOL_GPL(pci_host_common_remove); > -- > 2.37.1 >
Hi Manivannan, > Subject: Re: [PATCH] PCI: check bridge->bus in > pci_host_common_remove > > On Mon, Oct 28, 2024 at 04:46:43PM +0800, Peng Fan (OSS) wrote: > > From: Peng Fan <peng.fan@nxp.com> > > > > When PCI node was created using an overlay and the overlay is > > reverted/destroyed, the "linux,pci-domain" property no longer exists, > > so of_get_pci_domain_nr will return failure. Then > > of_pci_bus_release_domain_nr will actually use the dynamic IDA, > even > > if the IDA was allocated in static IDA. So the flow is as below: > > A: of_changeset_revert > > pci_host_common_remove > > pci_bus_release_domain_nr > > of_pci_bus_release_domain_nr > > of_get_pci_domain_nr # fails because overlay is gone > > ida_free(&pci_domain_nr_dynamic_ida) > > > > With driver calls pci_host_common_remove explicity, the flow > becomes: > > B pci_host_common_remove > > pci_bus_release_domain_nr > > of_pci_bus_release_domain_nr > > of_get_pci_domain_nr # succeeds in this order > > ida_free(&pci_domain_nr_static_ida) > > A of_changeset_revert > > pci_host_common_remove > > > > With updated flow, the pci_host_common_remove will be called > twice, so > > need to check 'bridge->bus' to avoid accessing invalid pointer. > > > > Fixes: c14f7ccc9f5d ("PCI: Assign PCI domain IDs by ida_alloc()") > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > > I went through the previous discussion [1] and I couldn't see an > agreement on the point raised by Bjorn on 'removing the host bridge > before the overlay'. This patch is an agreement to Bjorn's idea. I have added pci_host_common_remove to remove host bridge before removing overlay as I wrote in commit log. But of_changeset_revert will still runs into pci_host_ common_remove to remove the host bridge again. Per my view, the design of of_changeset_revert to remove the device tree node will trigger device remove, so even pci_host_common_remove was explicitly used before of_changeset_revert. The following call to of_changeset_revert will still call pci_host_common_remove. So I did this patch to add a check of 'bus' to avoid remove again. > > I do think this is a valid point and if you do not think so, please state > the reason. I agree Bjorn's view, this patch is output of agreement as I write above. Thanks, Peng. > > - Mani > > [1] > https://lore.kernel.org/lkml/20230913115737.GA426735@bhelgaas/ > > > --- > > > > V1: > > Not sure to keep the fixes here. I could drop the Fixes tag if it is > > improper. > > This is to revisit the patch [1] which was rejected last year. This > > new flow is using the suggest flow following Bjorn's suggestion. > > But of_changeset_revert will still invoke plaform_remove and then > > pci_host_common_remove. So worked out this patch together with a > patch > > to jailhouse driver as below: > > static void destroy_vpci_of_overlay(void) { > > + struct device_node *vpci_node = NULL; > > + > > if (overlay_applied) { > > +#if LINUX_VERSION_CODE >= KERNEL_VERSION(6,6,0) > > + vpci_node = of_find_node_by_path("/pci@0"); > > + if (vpci_node) { > > + struct platform_device *pdev = > of_find_device_by_node(vpci_node); > > + if (!pdev) > > + printk("Not found device for /pci@0\n"); > > + else { > > + pci_host_common_remove(pdev); > > + platform_device_put(pdev); > > + } > > + } > > + of_node_put(vpci_node); #endif > > + > > of_changeset_revert(&overlay_changeset); > > > > [1] > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2F > lore > > .kernel.org%2Flkml%2F20230908224858.GA306960%40bhelgaas%2 > FT%2F%23md12e > > > 6097d91a012ede78c997fc5abf460029a569&data=05%7C02%7Cpeng. > fan%40nxp.com > > %7C025e209cf9264c4240fa08dd053d9211%7C686ea1d3bc2b4c6fa > 92cd99c5c301635 > > %7C0%7C0%7C638672484189046564%7CUnknown%7CTWFpbGZsb > 3d8eyJFbXB0eU1hcGki > > > OnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIl > dUIjoyfQ > > %3D%3D%7C0%7C%7C%7C&sdata=uCo5MO5fEqCjBzwZ8hdnsf3ORh > SedhrJWvNOCCMNvG0% > > 3D&reserved=0 > > > > drivers/pci/controller/pci-host-common.c | 6 ++++-- > > 1 file changed, 4 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/pci/controller/pci-host-common.c > > b/drivers/pci/controller/pci-host-common.c > > index cf5f59a745b3..5a9c29fc57cd 100644 > > --- a/drivers/pci/controller/pci-host-common.c > > +++ b/drivers/pci/controller/pci-host-common.c > > @@ -86,8 +86,10 @@ void pci_host_common_remove(struct > platform_device *pdev) > > struct pci_host_bridge *bridge = platform_get_drvdata(pdev); > > > > pci_lock_rescan_remove(); > > - pci_stop_root_bus(bridge->bus); > > - pci_remove_root_bus(bridge->bus); > > + if (bridge->bus) { > > + pci_stop_root_bus(bridge->bus); > > + pci_remove_root_bus(bridge->bus); > > + } > > pci_unlock_rescan_remove(); > > } > > EXPORT_SYMBOL_GPL(pci_host_common_remove); > > -- > > 2.37.1 > > > > -- > மணிவண்ணன் சதாசிவம்
On Fri, Nov 15, 2024 at 10:14:10AM +0000, Peng Fan wrote: > Hi Manivannan, > > > Subject: Re: [PATCH] PCI: check bridge->bus in > > pci_host_common_remove > > > > On Mon, Oct 28, 2024 at 04:46:43PM +0800, Peng Fan (OSS) wrote: > > > From: Peng Fan <peng.fan@nxp.com> > > > > > > When PCI node was created using an overlay and the overlay is > > > reverted/destroyed, the "linux,pci-domain" property no longer exists, > > > so of_get_pci_domain_nr will return failure. Then > > > of_pci_bus_release_domain_nr will actually use the dynamic IDA, > > even > > > if the IDA was allocated in static IDA. So the flow is as below: > > > A: of_changeset_revert > > > pci_host_common_remove > > > pci_bus_release_domain_nr > > > of_pci_bus_release_domain_nr > > > of_get_pci_domain_nr # fails because overlay is gone > > > ida_free(&pci_domain_nr_dynamic_ida) > > > > > > With driver calls pci_host_common_remove explicity, the flow > > becomes: > > > B pci_host_common_remove > > > pci_bus_release_domain_nr > > > of_pci_bus_release_domain_nr > > > of_get_pci_domain_nr # succeeds in this order > > > ida_free(&pci_domain_nr_static_ida) > > > A of_changeset_revert > > > pci_host_common_remove > > > > > > With updated flow, the pci_host_common_remove will be called > > twice, so > > > need to check 'bridge->bus' to avoid accessing invalid pointer. > > > > > > Fixes: c14f7ccc9f5d ("PCI: Assign PCI domain IDs by ida_alloc()") > > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > > > > I went through the previous discussion [1] and I couldn't see an > > agreement on the point raised by Bjorn on 'removing the host bridge > > before the overlay'. > > This patch is an agreement to Bjorn's idea. > > I have added pci_host_common_remove to remove host bridge > before removing overlay as I wrote in commit log. > > But of_changeset_revert will still runs into pci_host_ > common_remove to remove the host bridge again. Per > my view, the design of of_changeset_revert to remove > the device tree node will trigger device remove, so even > pci_host_common_remove was explicitly used before > of_changeset_revert. The following call to of_changeset_revert > will still call pci_host_common_remove. > > So I did this patch to add a check of 'bus' to avoid remove again. > Ok. I think there was a misunderstanding. Bjorn's example driver, 'i2c-demux-pinctrl' applies the changeset, then adds the i2c adapter for its own. And in remove(), it does the reverse. But in your case, the issue is with the host bridge driver that gets probed because of the changeset. While with 'i2c-demux-pinctrl' driver, it only applies the changeset. So we cannot compare both drivers. I believe in your case, 'i2c-demux-pinctrl' becomes 'jailhouse', isn't it? So in your case, changeset is applied by jailhouse and that causes the platform device to be created for the host bridge and then the host bridge driver gets probed. So during destroy(), you call of_changeset_revert() that removes the platform device and during that process it removes the host bridge driver. The issue happens because during host bridge remove, it calls pci_remove_root_bus() and that tries to remove the domain_nr using pci_bus_release_domain_nr(). But pci_bus_release_domain_nr() uses DT node to check whether to free the domain_nr from static IDA or dynamic IDA. And because there is no DT node exist at this time (it was already removed by of_changeset_revert()), it forces pci_bus_release_domain_nr() to use dynamic IDA even though the IDA was initially allocated from static IDA. I think a neat way to solve this issue would be by removing the OF node only after removing all platform devices/drivers associated with that node. But I honestly do not know whether that is possible or not. Otherwise, any other driver that relies on the OF node in its remove() callback, could suffer from the same issue. And whatever fix we may come up with in PCI core, it will be a band-aid only. I'd like to check with Rob first about his opinion. - Mani > > > > I do think this is a valid point and if you do not think so, please state > > the reason. > > I agree Bjorn's view, this patch is output of agreement as I write above. > > Thanks, > Peng. > > > > > - Mani > > > > [1] > > https://lore.kernel.org/lkml/20230913115737.GA426735@bhelgaas/ > > > > > --- > > > > > > V1: > > > Not sure to keep the fixes here. I could drop the Fixes tag if it is > > > improper. > > > This is to revisit the patch [1] which was rejected last year. This > > > new flow is using the suggest flow following Bjorn's suggestion. > > > But of_changeset_revert will still invoke plaform_remove and then > > > pci_host_common_remove. So worked out this patch together with a > > patch > > > to jailhouse driver as below: > > > static void destroy_vpci_of_overlay(void) { > > > + struct device_node *vpci_node = NULL; > > > + > > > if (overlay_applied) { > > > +#if LINUX_VERSION_CODE >= KERNEL_VERSION(6,6,0) > > > + vpci_node = of_find_node_by_path("/pci@0"); > > > + if (vpci_node) { > > > + struct platform_device *pdev = > > of_find_device_by_node(vpci_node); > > > + if (!pdev) > > > + printk("Not found device for /pci@0\n"); > > > + else { > > > + pci_host_common_remove(pdev); > > > + platform_device_put(pdev); > > > + } > > > + } > > > + of_node_put(vpci_node); #endif > > > + > > > of_changeset_revert(&overlay_changeset); > > > > > > [1] > > > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2F > > lore > > > .kernel.org%2Flkml%2F20230908224858.GA306960%40bhelgaas%2 > > FT%2F%23md12e > > > > > 6097d91a012ede78c997fc5abf460029a569&data=05%7C02%7Cpeng. > > fan%40nxp.com > > > %7C025e209cf9264c4240fa08dd053d9211%7C686ea1d3bc2b4c6fa > > 92cd99c5c301635 > > > %7C0%7C0%7C638672484189046564%7CUnknown%7CTWFpbGZsb > > 3d8eyJFbXB0eU1hcGki > > > > > OnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIl > > dUIjoyfQ > > > %3D%3D%7C0%7C%7C%7C&sdata=uCo5MO5fEqCjBzwZ8hdnsf3ORh > > SedhrJWvNOCCMNvG0% > > > 3D&reserved=0 > > > > > > drivers/pci/controller/pci-host-common.c | 6 ++++-- > > > 1 file changed, 4 insertions(+), 2 deletions(-) > > > > > > diff --git a/drivers/pci/controller/pci-host-common.c > > > b/drivers/pci/controller/pci-host-common.c > > > index cf5f59a745b3..5a9c29fc57cd 100644 > > > --- a/drivers/pci/controller/pci-host-common.c > > > +++ b/drivers/pci/controller/pci-host-common.c > > > @@ -86,8 +86,10 @@ void pci_host_common_remove(struct > > platform_device *pdev) > > > struct pci_host_bridge *bridge = platform_get_drvdata(pdev); > > > > > > pci_lock_rescan_remove(); > > > - pci_stop_root_bus(bridge->bus); > > > - pci_remove_root_bus(bridge->bus); > > > + if (bridge->bus) { > > > + pci_stop_root_bus(bridge->bus); > > > + pci_remove_root_bus(bridge->bus); > > > + } > > > pci_unlock_rescan_remove(); > > > } > > > EXPORT_SYMBOL_GPL(pci_host_common_remove); > > > -- > > > 2.37.1 > > > > > > > -- > > மணிவண்ணன் சதாசிவம்
> Subject: Re: [PATCH] PCI: check bridge->bus in > pci_host_common_remove > > On Fri, Nov 15, 2024 at 10:14:10AM +0000, Peng Fan wrote: > > Hi Manivannan, > > > > > Subject: Re: [PATCH] PCI: check bridge->bus in > > > pci_host_common_remove > > > > > > On Mon, Oct 28, 2024 at 04:46:43PM +0800, Peng Fan (OSS) wrote: > > > > From: Peng Fan <peng.fan@nxp.com> > > > > > > > > When PCI node was created using an overlay and the overlay is > > > > reverted/destroyed, the "linux,pci-domain" property no longer > > > > exists, so of_get_pci_domain_nr will return failure. Then > > > > of_pci_bus_release_domain_nr will actually use the dynamic IDA, > > > even > > > > if the IDA was allocated in static IDA. So the flow is as below: > > > > A: of_changeset_revert > > > > pci_host_common_remove > > > > pci_bus_release_domain_nr > > > > of_pci_bus_release_domain_nr > > > > of_get_pci_domain_nr # fails because overlay is gone > > > > ida_free(&pci_domain_nr_dynamic_ida) > > > > > > > > With driver calls pci_host_common_remove explicity, the flow > > > becomes: > > > > B pci_host_common_remove > > > > pci_bus_release_domain_nr > > > > of_pci_bus_release_domain_nr > > > > of_get_pci_domain_nr # succeeds in this order > > > > ida_free(&pci_domain_nr_static_ida) > > > > A of_changeset_revert > > > > pci_host_common_remove > > > > > > > > With updated flow, the pci_host_common_remove will be called > > > twice, so > > > > need to check 'bridge->bus' to avoid accessing invalid pointer. > > > > > > > > Fixes: c14f7ccc9f5d ("PCI: Assign PCI domain IDs by ida_alloc()") > > > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > > > > > > I went through the previous discussion [1] and I couldn't see an > > > agreement on the point raised by Bjorn on 'removing the host > bridge > > > before the overlay'. > > > > This patch is an agreement to Bjorn's idea. > > > > I have added pci_host_common_remove to remove host bridge > before > > removing overlay as I wrote in commit log. > > > > But of_changeset_revert will still runs into pci_host_ > common_remove > > to remove the host bridge again. Per my view, the design of > > of_changeset_revert to remove the device tree node will trigger > device > > remove, so even pci_host_common_remove was explicitly used > before > > of_changeset_revert. The following call to of_changeset_revert will > > still call pci_host_common_remove. > > > > So I did this patch to add a check of 'bus' to avoid remove again. > > > > Ok. I think there was a misunderstanding. Bjorn's example driver, 'i2c- > demux-pinctrl' applies the changeset, then adds the i2c adapter for its > own. And in remove(), it does the reverse. > > But in your case, the issue is with the host bridge driver that gets > probed because of the changeset. While with 'i2c-demux-pinctrl' driver, > it only applies the changeset. So we cannot compare both drivers. I > believe in your case, 'i2c-demux-pinctrl' becomes 'jailhouse', isn't it? Correct. > > So in your case, changeset is applied by jailhouse and that causes the > platform device to be created for the host bridge and then the host > bridge driver gets probed. So during destroy(), you call > of_changeset_revert() that removes the platform device and during > that process it removes the host bridge driver. The issue happens > because during host bridge remove, it calls > pci_remove_root_bus() and that tries to remove the domain_nr using > pci_bus_release_domain_nr(). > > But pci_bus_release_domain_nr() uses DT node to check whether to > free the domain_nr from static IDA or dynamic IDA. And because there > is no DT node exist at this time (it was already removed by > of_changeset_revert()), it forces > pci_bus_release_domain_nr() to use dynamic IDA even though the IDA > was initially allocated from static IDA. Yeah. This is the issue. > > I think a neat way to solve this issue would be by removing the OF > node only after removing all platform devices/drivers associated with > that node. But I honestly do not know whether that is possible or not. > Otherwise, any other driver that relies on the OF node in its remove() > callback, could suffer from the same issue. And whatever fix we may > come up with in PCI core, it will be a band-aid only. > > I'd like to check with Rob first about his opinion. Rob, Do you have any comments? Thanks, Peng. > > - Mani > > > > > > > I do think this is a valid point and if you do not think so, please > > > state the reason. > > > > I agree Bjorn's view, this patch is output of agreement as I write > above. > > > > Thanks, > > Peng. > > > > > > > > - Mani > > > > > > [1] > > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2F > lo > > > > re.kernel.org%2Flkml%2F20230913115737.GA426735%40bhelgaas%2 > F&data=05 > > > %7C02%7Cpeng.fan%40nxp.com%7Ca4506485e5234a78dbe308dd > 05846f0a%7C686e > > > > a1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6386727885612559 > 43%7CUnknown% > > > > 7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMC > IsIlAiOiJXaW > > > > 4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata= > QdV1D23C%2 > > > BiuMoipt%2BXkINp77bAjFmmMIBuA5kuAR9uM%3D&reserved=0 > > > > > > > --- > > > > > > > > V1: > > > > Not sure to keep the fixes here. I could drop the Fixes tag if it > > > > is improper. > > > > This is to revisit the patch [1] which was rejected last year. > > > > This new flow is using the suggest flow following Bjorn's > suggestion. > > > > But of_changeset_revert will still invoke plaform_remove and > then > > > > pci_host_common_remove. So worked out this patch together > with a > > > patch > > > > to jailhouse driver as below: > > > > static void destroy_vpci_of_overlay(void) { > > > > + struct device_node *vpci_node = NULL; > > > > + > > > > if (overlay_applied) { > > > > +#if LINUX_VERSION_CODE >= KERNEL_VERSION(6,6,0) > > > > + vpci_node = of_find_node_by_path("/pci@0"); > > > > + if (vpci_node) { > > > > + struct platform_device *pdev = > > > of_find_device_by_node(vpci_node); > > > > + if (!pdev) > > > > + printk("Not found device for /pci@0\n"); > > > > + else { > > > > + pci_host_common_remove(pdev); > > > > + platform_device_put(pdev); > > > > + } > > > > + } > > > > + of_node_put(vpci_node); #endif > > > > + > > > > of_changeset_revert(&overlay_changeset); > > > > > > > > [1] > > > > > > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2F > > > lore > > > > .kernel.org%2Flkml%2F20230908224858.GA306960%40bhelgaas > %2 > > > FT%2F%23md12e > > > > > > > > 6097d91a012ede78c997fc5abf460029a569&data=05%7C02%7Cpeng. > > > fan%40nxp.com > > > > %7C025e209cf9264c4240fa08dd053d9211%7C686ea1d3bc2b4c > 6fa > > > 92cd99c5c301635 > > > > %7C0%7C0%7C638672484189046564%7CUnknown%7CTWFpbG > Zsb > > > 3d8eyJFbXB0eU1hcGki > > > > > > > > OnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIl > > > dUIjoyfQ > > > > %3D%3D%7C0%7C%7C%7C&sdata=uCo5MO5fEqCjBzwZ8hdnsf3O > Rh > > > SedhrJWvNOCCMNvG0% > > > > 3D&reserved=0 > > > > > > > > drivers/pci/controller/pci-host-common.c | 6 ++++-- > > > > 1 file changed, 4 insertions(+), 2 deletions(-) > > > > > > > > diff --git a/drivers/pci/controller/pci-host-common.c > > > > b/drivers/pci/controller/pci-host-common.c > > > > index cf5f59a745b3..5a9c29fc57cd 100644 > > > > --- a/drivers/pci/controller/pci-host-common.c > > > > +++ b/drivers/pci/controller/pci-host-common.c > > > > @@ -86,8 +86,10 @@ void pci_host_common_remove(struct > > > platform_device *pdev) > > > > struct pci_host_bridge *bridge = platform_get_drvdata(pdev); > > > > > > > > pci_lock_rescan_remove(); > > > > - pci_stop_root_bus(bridge->bus); > > > > - pci_remove_root_bus(bridge->bus); > > > > + if (bridge->bus) { > > > > + pci_stop_root_bus(bridge->bus); > > > > + pci_remove_root_bus(bridge->bus); > > > > + } > > > > pci_unlock_rescan_remove(); > > > > } > > > > EXPORT_SYMBOL_GPL(pci_host_common_remove); > > > > -- > > > > 2.37.1 > > > > > > > > > > -- > > > மணிவண்ணன் சதாசிவம் > > -- > மணிவண்ணன் சதாசிவம்
On Mon, Oct 28, 2024 at 04:46:43PM +0800, Peng Fan (OSS) wrote: > From: Peng Fan <peng.fan@nxp.com> > > When PCI node was created using an overlay and the overlay is > reverted/destroyed, the "linux,pci-domain" property no longer exists, > so of_get_pci_domain_nr will return failure. Then > of_pci_bus_release_domain_nr will actually use the dynamic IDA, even > if the IDA was allocated in static IDA. So the flow is as below: > A: of_changeset_revert > pci_host_common_remove > pci_bus_release_domain_nr > of_pci_bus_release_domain_nr > of_get_pci_domain_nr # fails because overlay is gone > ida_free(&pci_domain_nr_dynamic_ida) > > With driver calls pci_host_common_remove explicity, the flow becomes: > B pci_host_common_remove > pci_bus_release_domain_nr > of_pci_bus_release_domain_nr > of_get_pci_domain_nr # succeeds in this order > ida_free(&pci_domain_nr_static_ida) > A of_changeset_revert > pci_host_common_remove > > With updated flow, the pci_host_common_remove will be called twice, > so need to check 'bridge->bus' to avoid accessing invalid pointer. If/when you post a v2 of this, please: - Update the subject to say *why* this change is desirable. - Follow the capitalization convention (use "git log --oneline" to discover it). - Add "()" after function names in the text (no need in the call tree because that's obviously all functions). - Mention the user-visible problem this fixes, e.g., do you see an oops because of a NULL pointer dereference?
diff --git a/drivers/pci/controller/pci-host-common.c b/drivers/pci/controller/pci-host-common.c index cf5f59a745b3..5a9c29fc57cd 100644 --- a/drivers/pci/controller/pci-host-common.c +++ b/drivers/pci/controller/pci-host-common.c @@ -86,8 +86,10 @@ void pci_host_common_remove(struct platform_device *pdev) struct pci_host_bridge *bridge = platform_get_drvdata(pdev); pci_lock_rescan_remove(); - pci_stop_root_bus(bridge->bus); - pci_remove_root_bus(bridge->bus); + if (bridge->bus) { + pci_stop_root_bus(bridge->bus); + pci_remove_root_bus(bridge->bus); + } pci_unlock_rescan_remove(); } EXPORT_SYMBOL_GPL(pci_host_common_remove);