@@ -521,7 +521,7 @@ struct rcec_ea {
void pci_save_dpc_state(struct pci_dev *dev);
void pci_restore_dpc_state(struct pci_dev *dev);
void pci_dpc_init(struct pci_dev *pdev);
-void dpc_process_error(struct pci_dev *pdev);
+struct pci_dev *dpc_process_error(struct pci_dev *pdev);
pci_ers_result_t dpc_reset_link(struct pci_dev *pdev);
bool pci_dpc_recovered(struct pci_dev *pdev);
#else
@@ -257,10 +257,17 @@ static int dpc_get_aer_uncorrect_severity(struct pci_dev *dev,
return 1;
}
-void dpc_process_error(struct pci_dev *pdev)
+/**
+ * dpc_process_error - handle the DPC error status
+ * @pdev: the port that experienced the containment event
+ *
+ * Return the device that experienced the error.
+ */
+struct pci_dev *dpc_process_error(struct pci_dev *pdev)
{
u16 cap = pdev->dpc_cap, status, source, reason, ext_reason;
struct aer_err_info info;
+ struct pci_dev *err_dev = NULL;
pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
pci_read_config_word(pdev, cap + PCI_EXP_DPC_SOURCE_ID, &source);
@@ -283,6 +290,13 @@ void dpc_process_error(struct pci_dev *pdev)
"software trigger" :
"reserved error");
+ if (reason == PCI_EXP_DPC_STATUS_TRIGGER_RSN_NFE ||
+ reason == PCI_EXP_DPC_STATUS_TRIGGER_RSN_FE)
+ err_dev = pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus),
+ PCI_BUS_NUM(source), source & 0xff);
+ else
+ err_dev = pci_dev_get(pdev);
+
/* show RP PIO error detail information */
if (pdev->dpc_rp_extensions &&
reason == PCI_EXP_DPC_STATUS_TRIGGER_RSN_IN_EXT &&
@@ -295,6 +309,8 @@ void dpc_process_error(struct pci_dev *pdev)
pci_aer_clear_nonfatal_status(pdev);
pci_aer_clear_fatal_status(pdev);
}
+
+ return err_dev;
}
static void pci_clear_surpdn_errors(struct pci_dev *pdev)
@@ -350,21 +366,23 @@ static bool dpc_is_surprise_removal(struct pci_dev *pdev)
static irqreturn_t dpc_handler(int irq, void *context)
{
- struct pci_dev *pdev = context;
+ struct pci_dev *err_port = context, *err_dev = NULL;
/*
* According to PCIe r6.0 sec 6.7.6, errors are an expected side effect
* of async removal and should be ignored by software.
*/
- if (dpc_is_surprise_removal(pdev)) {
- dpc_handle_surprise_removal(pdev);
+ if (dpc_is_surprise_removal(err_port)) {
+ dpc_handle_surprise_removal(err_port);
return IRQ_HANDLED;
}
- dpc_process_error(pdev);
+ err_dev = dpc_process_error(err_port);
/* We configure DPC so it only triggers on ERR_FATAL */
- pcie_do_recovery(pdev, pci_channel_io_frozen, dpc_reset_link);
+ pcie_do_recovery(err_dev, pci_channel_io_frozen, dpc_reset_link);
+
+ pci_dev_put(err_dev);
return IRQ_HANDLED;
}
@@ -150,7 +150,7 @@ static int acpi_send_edr_status(struct pci_dev *pdev, struct pci_dev *edev,
static void edr_handle_event(acpi_handle handle, u32 event, void *data)
{
- struct pci_dev *pdev = data, *edev;
+ struct pci_dev *pdev = data, *err_port, *err_dev = NULL;
pci_ers_result_t estate = PCI_ERS_RESULT_DISCONNECT;
u16 status;
@@ -169,36 +169,36 @@ static void edr_handle_event(acpi_handle handle, u32 event, void *data)
* may be that port or a parent of it (PCI Firmware r3.3, sec
* 4.6.13).
*/
- edev = acpi_dpc_port_get(pdev);
- if (!edev) {
+ err_port = acpi_dpc_port_get(pdev);
+ if (!err_port) {
pci_err(pdev, "Firmware failed to locate DPC port\n");
return;
}
- pci_dbg(pdev, "Reported EDR dev: %s\n", pci_name(edev));
+ pci_dbg(pdev, "Reported EDR dev: %s\n", pci_name(err_port));
/* If port does not support DPC, just send the OST */
- if (!edev->dpc_cap) {
- pci_err(edev, FW_BUG "This device doesn't support DPC\n");
+ if (!err_port->dpc_cap) {
+ pci_err(err_port, FW_BUG "This device doesn't support DPC\n");
goto send_ost;
}
/* Check if there is a valid DPC trigger */
- pci_read_config_word(edev, edev->dpc_cap + PCI_EXP_DPC_STATUS, &status);
+ pci_read_config_word(err_port, err_port->dpc_cap + PCI_EXP_DPC_STATUS, &status);
if (!(status & PCI_EXP_DPC_STATUS_TRIGGER)) {
- pci_err(edev, "Invalid DPC trigger %#010x\n", status);
+ pci_err(err_port, "Invalid DPC trigger %#010x\n", status);
goto send_ost;
}
- dpc_process_error(edev);
- pci_aer_raw_clear_status(edev);
+ err_dev = dpc_process_error(err_port);
+ pci_aer_raw_clear_status(err_port);
/*
* Irrespective of whether the DPC event is triggered by ERR_FATAL
* or ERR_NONFATAL, since the link is already down, use the FATAL
* error recovery path for both cases.
*/
- estate = pcie_do_recovery(edev, pci_channel_io_frozen, dpc_reset_link);
+ estate = pcie_do_recovery(err_dev, pci_channel_io_frozen, dpc_reset_link);
send_ost:
@@ -207,15 +207,16 @@ static void edr_handle_event(acpi_handle handle, u32 event, void *data)
* to firmware. If not successful, send _OST(0xF, BDF << 16 | 0x81).
*/
if (estate == PCI_ERS_RESULT_RECOVERED) {
- pci_dbg(edev, "DPC port successfully recovered\n");
- pcie_clear_device_status(edev);
- acpi_send_edr_status(pdev, edev, EDR_OST_SUCCESS);
+ pci_dbg(err_port, "DPC port successfully recovered\n");
+ pcie_clear_device_status(err_port);
+ acpi_send_edr_status(pdev, err_port, EDR_OST_SUCCESS);
} else {
- pci_dbg(edev, "DPC port recovery failed\n");
- acpi_send_edr_status(pdev, edev, EDR_OST_FAILED);
+ pci_dbg(err_port, "DPC port recovery failed\n");
+ acpi_send_edr_status(pdev, err_port, EDR_OST_FAILED);
}
- pci_dev_put(edev);
+ pci_dev_put(err_port);
+ pci_dev_put(err_dev);
}
void pci_acpi_add_edr_notifier(struct pci_dev *pdev)
The current implementation of pcie_do_recovery() assumes that the recovery process is executed on the device that detected the error. However, the DPC driver currently passes the error port that experienced the DPC event to pcie_do_recovery(). Use the SOURCE ID register to correctly identify the device that detected the error. By passing this error device to pcie_do_recovery(), subsequent patches will be able to accurately access AER status of the error device. Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> --- drivers/pci/pci.h | 2 +- drivers/pci/pcie/dpc.c | 30 ++++++++++++++++++++++++------ drivers/pci/pcie/edr.c | 35 ++++++++++++++++++----------------- 3 files changed, 43 insertions(+), 24 deletions(-)