diff mbox series

[v3,1/2] dt-bindings: PCI: xilinx-cpm: Add reset-gpios for PCIe RP PERST#

Message ID 20250227042454.907182-2-sai.krishna.musham@amd.com (mailing list archive)
State New
Delegated to: Krzysztof Wilczyński
Headers show
Series Add support for PCIe RP PERST# | expand

Commit Message

Sai Krishna Musham Feb. 27, 2025, 4:24 a.m. UTC 
Introduce `reset-gpios` property to enable GPIO-based control of
the PCIe RP PERST# signal, generating assert and deassert signals.

Traditionally, the reset was managed in hardware and enabled during
initialization. With this patch set, the reset will be handled by the
driver. Consequently, the `reset-gpios` property must be explicitly
provided to ensure proper functionality.

Signed-off-by: Sai Krishna Musham <sai.krishna.musham@amd.com>
---
This patch depends on the following patch series.
https://lore.kernel.org/all/20250217072713.635643-2-thippeswamy.havalige@amd.com/

Changes for v3:
- None

Changes for v2:
- Add define from include/dt-bindings/gpio/gpio.h for PERST# polarity
- Update commit message
---
 .../devicetree/bindings/pci/xilinx-versal-cpm.yaml         | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
index b63a759ec2d7..6aaeb76f498b 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
+++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
@@ -33,6 +33,9 @@  properties:
       - const: cpm_csr
     minItems: 2
 
+  reset-gpios:
+    description: GPIO used as PERST# signal. Please refer to pci.txt.
+
   interrupts:
     maxItems: 1
 
@@ -63,6 +66,7 @@  properties:
 required:
   - reg
   - reg-names
+  - reset-gpios
   - "#interrupt-cells"
   - interrupts
   - interrupt-map
@@ -75,6 +79,7 @@  unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
 
     versal {
                #address-cells = <2>;
@@ -99,6 +104,7 @@  examples:
                        reg = <0x0 0xfca10000 0x0 0x1000>,
                              <0x6 0x00000000 0x0 0x10000000>;
                        reg-names = "cpm_slcr", "cfg";
+                       reset-gpios = <&gpio1 38 GPIO_ACTIVE_LOW>;
                        pcie_intc_0: interrupt-controller {
                                #address-cells = <0>;
                                #interrupt-cells = <1>;
@@ -127,6 +133,7 @@  examples:
                              <0x06 0x00000000 0x00 0x1000000>,
                              <0x00 0xfce20000 0x00 0x1000000>;
                        reg-names = "cpm_slcr", "cfg", "cpm_csr";
+                       reset-gpios = <&gpio1 38 GPIO_ACTIVE_LOW>;
 
                        pcie_intc_1: interrupt-controller {
                                #address-cells = <0>;