diff mbox series

[v3] PCI: Declare quirk_huawei_pcie_sva() as pci_fixup_header

Message ID 20250317011352.5806-1-zhangfei.gao@linaro.org (mailing list archive)
State New
Headers show
Series [v3] PCI: Declare quirk_huawei_pcie_sva() as pci_fixup_header | expand

Commit Message

Zhangfei Gao March 17, 2025, 1:13 a.m. UTC
The commit bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper
probe path") fixed the iommu_probe_device() flow to correctly initialize
firmware operations, allowing arm_smmu_probe_device() to be invoked
earlier. This changes the invocation timing of arm_smmu_probe_device
from the final fixup phase to the header fixup phase.

pci_iov_add_virtfn
    pci_device_add
      pci_fixup_device(pci_fixup_header)      <--
      device_add
        bus_notify
          iommu_bus_notifier
  +         iommu_probe_device
  +           arm_smmu_probe_device
    pci_bus_add_device
      pci_fixup_device(pci_fixup_final)       <--
      device_attach
        driver_probe_device
          really_probe
            pci_dma_configure
              acpi_dma_configure_id
  -             iommu_probe_device
  -               arm_smmu_probe_device

This is the pci_iov_add_virtfn().  The non-SR-IOV case is similar in
that pci_device_add() is called from pci_scan_single_device() in the
generic enumeration path, and pci_bus_add_device() is called later,
after all a host bridge has been enumerated.

Declare the fixup as pci_fixup_header to ensure the configuration
happens before arm_smmu_probe_device.

Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
---
v3: modify commit msg, add Acked-by
v2: modify commit msg

 drivers/pci/quirks.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index f840d611c450..a9759889ff5e 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1991,12 +1991,12 @@  static void quirk_huawei_pcie_sva(struct pci_dev *pdev)
 	    device_create_managed_software_node(&pdev->dev, properties, NULL))
 		pci_warn(pdev, "could not add stall property");
 }
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa250, quirk_huawei_pcie_sva);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa251, quirk_huawei_pcie_sva);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa255, quirk_huawei_pcie_sva);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa256, quirk_huawei_pcie_sva);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa258, quirk_huawei_pcie_sva);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa259, quirk_huawei_pcie_sva);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HUAWEI, 0xa250, quirk_huawei_pcie_sva);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HUAWEI, 0xa251, quirk_huawei_pcie_sva);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HUAWEI, 0xa255, quirk_huawei_pcie_sva);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HUAWEI, 0xa256, quirk_huawei_pcie_sva);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HUAWEI, 0xa258, quirk_huawei_pcie_sva);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HUAWEI, 0xa259, quirk_huawei_pcie_sva);
 
 /*
  * It's possible for the MSI to get corrupted if SHPC and ACPI are used