diff mbox series

[RESEND,v6,2/7] PCI: imx6: Skip one dw_pcie_wait_for_link() in workaround link training

Message ID 20250416081314.3929794-3-hongxing.zhu@nxp.com (mailing list archive)
State New
Headers show
Series Add some enhancements for i.MX95 PCIe | expand

Commit Message

Richard Zhu April 16, 2025, 8:13 a.m. UTC 
Remove one redundant dw_pcie_wait_for_link() in link training workaround
because common framework already do that.

Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index a4c0714c6468..c5871c3d4194 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -881,11 +881,11 @@  static int imx_pcie_start_link(struct dw_pcie *pci)
 	/* Start LTSSM. */
 	imx_pcie_ltssm_enable(dev);
 
-	ret = dw_pcie_wait_for_link(pci);
-	if (ret)
-		goto err_reset_phy;
-
 	if (pci->max_link_speed > 1) {
+		ret = dw_pcie_wait_for_link(pci);
+		if (ret)
+			goto err_reset_phy;
+
 		/* Allow faster modes after the link is up */
 		dw_pcie_dbi_ro_wr_en(pci);
 		tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
@@ -907,17 +907,10 @@  static int imx_pcie_start_link(struct dw_pcie *pci)
 			dev_err(dev, "Failed to bring link up!\n");
 			goto err_reset_phy;
 		}
-
-		/* Make sure link training is finished as well! */
-		ret = dw_pcie_wait_for_link(pci);
-		if (ret)
-			goto err_reset_phy;
 	} else {
 		dev_info(dev, "Link: Only Gen1 is enabled\n");
 	}
 
-	tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
-	dev_info(dev, "Link up, Gen%i\n", tmp & PCI_EXP_LNKSTA_CLS);
 	return 0;
 
 err_reset_phy: