===================================================================
@@ -26,6 +26,13 @@
#endif
#define MODULE_PARAM_PREFIX "pcie_aspm."
+/* Note: those are not register definitions */
+#define ASPM_STATE_L0S_UP (1) /* Upstream direction L0s state */
+#define ASPM_STATE_L0S_DW (2) /* Downstream direction L0s state */
+#define ASPM_STATE_L1 (4) /* L1 state */
+#define ASPM_STATE_L0S (ASPM_STATE_L0S_UP | ASPM_STATE_L0S_DW)
+#define ASPM_STATE_ALL (ASPM_STATE_L0S | ASPM_STATE_L1)
+
struct aspm_latency {
u32 l0s; /* L0s latency (nsec) */
u32 l1; /* L1 latency (nsec) */
@@ -40,19 +47,20 @@ struct pcie_link_state {
struct list_head link; /* node in parent's children list */
/* ASPM state */
- u32 aspm_support:2; /* Supported ASPM state */
- u32 aspm_enabled:2; /* Enabled ASPM state */
- u32 aspm_capable:2; /* Capable ASPM state with latency */
- u32 aspm_default:2; /* Default ASPM state by BIOS */
- u32 aspm_disable:2; /* Disabled ASPM state */
+ u32 aspm_support:3; /* Supported ASPM state */
+ u32 aspm_enabled:3; /* Enabled ASPM state */
+ u32 aspm_capable:3; /* Capable ASPM state with latency */
+ u32 aspm_default:3; /* Default ASPM state by BIOS */
+ u32 aspm_disable:3; /* Disabled ASPM state */
/* Clock PM state */
u32 clkpm_capable:1; /* Clock PM capable? */
u32 clkpm_enabled:1; /* Current Clock PM state */
u32 clkpm_default:1; /* Default Clock PM state by BIOS */
- /* Latencies */
- struct aspm_latency latency; /* Exit latency */
+ /* Exit latencies */
+ struct aspm_latency latency_up; /* Upstream direction exit latency */
+ struct aspm_latency latency_dw; /* Downstream direction exit latency */
/*
* Endpoint acceptable latencies. A pcie downstream port only
* has one slot under it, so at most there are 8 functions.
@@ -84,7 +92,7 @@ static int policy_to_aspm_state(struct p
return 0;
case POLICY_POWERSAVE:
/* Enable ASPM L0s/L1 */
- return PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1;
+ return ASPM_STATE_ALL;
case POLICY_DEFAULT:
return link->aspm_default;
}
@@ -278,36 +286,35 @@ static u32 calc_l1_acceptable(u32 encodi
return (1000 << encoding);
}
-static void pcie_aspm_get_cap_device(struct pci_dev *pdev, u32 *state,
- u32 *l0s, u32 *l1, u32 *enabled)
+struct aspm_register_info {
+ u32 support:2;
+ u32 enabled:2;
+ u32 latency_encoding_l0s;
+ u32 latency_encoding_l1;
+};
+
+static void pcie_get_aspm_reg(struct pci_dev *pdev,
+ struct aspm_register_info *info)
{
int pos;
u16 reg16;
- u32 reg32, encoding;
+ u32 reg32;
- *l0s = *l1 = *enabled = 0;
pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
pci_read_config_dword(pdev, pos + PCI_EXP_LNKCAP, ®32);
- *state = (reg32 & PCI_EXP_LNKCAP_ASPMS) >> 10;
- if (*state != PCIE_LINK_STATE_L0S &&
- *state != (PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_L0S))
- *state = 0;
- if (*state == 0)
- return;
-
- encoding = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12;
- *l0s = calc_l0s_latency(encoding);
- if (*state & PCIE_LINK_STATE_L1) {
- encoding = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15;
- *l1 = calc_l1_latency(encoding);
- }
+ info->support = (reg32 & PCI_EXP_LNKCAP_ASPMS) >> 10;
+ /* 00b and 10b are defined as "Reserved". */
+ if (info->support == PCIE_LINK_STATE_L1)
+ info->support = 0;
+ info->latency_encoding_l0s = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12;
+ info->latency_encoding_l1 = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15;
pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
- *enabled = reg16 & (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
+ info->enabled = reg16 & PCI_EXP_LNKCTL_ASPMC;
}
static void pcie_aspm_check_latency(struct pci_dev *endpoint)
{
- u32 l1_switch_latency = 0;
+ u32 latency, l1_switch_latency = 0;
struct aspm_latency *acceptable;
struct pcie_link_state *link;
@@ -320,18 +327,24 @@ static void pcie_aspm_check_latency(stru
acceptable = &link->acceptable[PCI_FUNC(endpoint->devfn)];
while (link) {
- /* Check L0s latency */
- if ((link->aspm_capable & PCIE_LINK_STATE_L0S) &&
- (link->latency.l0s > acceptable->l0s))
- link->aspm_capable &= ~PCIE_LINK_STATE_L0S;
+ /* Check upstream direction L0s latency */
+ if ((link->aspm_capable & ASPM_STATE_L0S_UP) &&
+ (link->latency_up.l0s > acceptable->l0s))
+ link->aspm_capable &= ~ASPM_STATE_L0S_UP;
+
+ /* Check downstream direction L0s latency */
+ if ((link->aspm_capable & ASPM_STATE_L0S_DW) &&
+ (link->latency_dw.l0s > acceptable->l0s))
+ link->aspm_capable &= ~ASPM_STATE_L0S_DW;
/*
* Check L1 latency.
* Every switch on the path to root complex need 1
* more microsecond for L1. Spec doesn't mention L0s.
*/
- if ((link->aspm_capable & PCIE_LINK_STATE_L1) &&
- (link->latency.l1 + l1_switch_latency > acceptable->l1))
- link->aspm_capable &= ~PCIE_LINK_STATE_L1;
+ latency = max_t(u32, link->latency_up.l1, link->latency_dw.l1);
+ if ((link->aspm_capable & ASPM_STATE_L1) &&
+ (latency + l1_switch_latency > acceptable->l1))
+ link->aspm_capable &= ~ASPM_STATE_L1;
l1_switch_latency += 1000;
link = link->parent;
@@ -340,33 +353,48 @@ static void pcie_aspm_check_latency(stru
static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
{
- u32 support, l0s, l1, enabled;
struct pci_dev *child, *parent = link->pdev;
struct pci_bus *linkbus = parent->subordinate;
+ struct aspm_register_info upreg, dwreg;
if (blacklist) {
/* Set enabled/disable so that we will disable ASPM later */
- link->aspm_enabled = PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1;
- link->aspm_disable = PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1;
+ link->aspm_enabled = ASPM_STATE_ALL;
+ link->aspm_disable = ASPM_STATE_ALL;
return;
}
/* Configure common clock before checking latencies */
pcie_aspm_configure_common_clock(link);
- /* upstream component states */
- pcie_aspm_get_cap_device(parent, &support, &l0s, &l1, &enabled);
- link->aspm_support = support;
- link->latency.l0s = l0s;
- link->latency.l1 = l1;
- link->aspm_enabled = enabled;
-
- /* downstream component states, all functions have the same setting */
+ /* Get upstream/downstream components' register state */
+ pcie_get_aspm_reg(parent, &upreg);
child = list_entry(linkbus->devices.next, struct pci_dev, bus_list);
- pcie_aspm_get_cap_device(child, &support, &l0s, &l1, &enabled);
- link->aspm_support &= support;
- link->latency.l0s = max_t(u32, link->latency.l0s, l0s);
- link->latency.l1 = max_t(u32, link->latency.l1, l1);
+ pcie_get_aspm_reg(child, &dwreg);
+
+ /*
+ * Setup L0s state
+ *
+ * Note that we must not enable L0s in either direction on a
+ * given link unless components on both sides of the link each
+ * support L0s.
+ */
+ if (dwreg.support & upreg.support & PCIE_LINK_STATE_L0S)
+ link->aspm_support |= ASPM_STATE_L0S;
+ if (dwreg.enabled & PCIE_LINK_STATE_L0S)
+ link->aspm_enabled |= ASPM_STATE_L0S_UP;
+ if (upreg.enabled & PCIE_LINK_STATE_L0S)
+ link->aspm_enabled |= ASPM_STATE_L0S_DW;
+ link->latency_up.l0s = calc_l0s_latency(upreg.latency_encoding_l0s);
+ link->latency_dw.l0s = calc_l0s_latency(dwreg.latency_encoding_l0s);
+
+ /* Setup L1 state */
+ if (upreg.support & dwreg.support & PCIE_LINK_STATE_L1)
+ link->aspm_support |= ASPM_STATE_L1;
+ if (upreg.enabled & dwreg.enabled & PCIE_LINK_STATE_L1)
+ link->aspm_enabled |= ASPM_STATE_L1;
+ link->latency_up.l1 = calc_l1_latency(upreg.latency_encoding_l1);
+ link->latency_dw.l1 = calc_l1_latency(dwreg.latency_encoding_l1);
/* Save default state */
link->aspm_default = link->aspm_enabled;
@@ -379,8 +407,7 @@ static void pcie_aspm_cap_init(struct pc
*/
list_for_each_entry(child, &linkbus->devices, bus_list) {
if (child->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
- link->aspm_disable =
- PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1;
+ link->aspm_disable = ASPM_STATE_ALL;
break;
}
}
@@ -409,19 +436,20 @@ static void pcie_aspm_cap_init(struct pc
}
}
-static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 state)
+static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val)
{
u16 reg16;
int pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
reg16 &= ~0x3;
- reg16 |= state;
+ reg16 |= val;
pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
}
static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state)
{
+ u32 upstream = 0, dwstream = 0;
struct pci_dev *child, *parent = link->pdev;
struct pci_bus *linkbus = parent->subordinate;
@@ -429,20 +457,27 @@ static void pcie_config_aspm_link(struct
state &= (link->aspm_capable & ~link->aspm_disable);
if (link->aspm_enabled == state)
return;
+ /* Convert ASPM state to upstream/downstream ASPM register state */
+ if (state & ASPM_STATE_L0S_UP)
+ dwstream |= PCIE_LINK_STATE_L0S;
+ if (state & ASPM_STATE_L0S_DW)
+ upstream |= PCIE_LINK_STATE_L0S;
+ if (state & ASPM_STATE_L1) {
+ upstream |= PCIE_LINK_STATE_L1;
+ dwstream |= PCIE_LINK_STATE_L1;
+ }
/*
* Spec 2.0 suggests all functions should be configured the
* same setting for ASPM. Enabling ASPM L1 should be done in
* upstream component first and then downstream, and vice
* versa for disabling ASPM L1. Spec doesn't mention L0S.
*/
- if (state & PCIE_LINK_STATE_L1)
- pcie_config_aspm_dev(parent, state);
-
+ if (state & ASPM_STATE_L1)
+ pcie_config_aspm_dev(parent, upstream);
list_for_each_entry(child, &linkbus->devices, bus_list)
- pcie_config_aspm_dev(child, state);
-
- if (!(state & PCIE_LINK_STATE_L1))
- pcie_config_aspm_dev(parent, state);
+ pcie_config_aspm_dev(child, dwstream);
+ if (!(state & ASPM_STATE_L1))
+ pcie_config_aspm_dev(parent, upstream);
link->aspm_enabled = state;
}
@@ -673,7 +708,10 @@ void pci_disable_link_state(struct pci_d
down_read(&pci_bus_sem);
mutex_lock(&aspm_lock);
link = parent->link_state;
- link->aspm_disable |= state;
+ if (state & PCIE_LINK_STATE_L0S)
+ link->aspm_disable |= ASPM_STATE_L0S;
+ if (state & PCIE_LINK_STATE_L1)
+ link->aspm_disable |= ASPM_STATE_L1;
pcie_config_aspm_link(link, policy_to_aspm_state(link));
if (state & PCIE_LINK_STATE_CLKPM) {
@@ -742,11 +780,17 @@ static ssize_t link_state_store(struct d
{
struct pci_dev *pdev = to_pci_dev(dev);
struct pcie_link_state *link, *root = pdev->link_state->root;
- u32 state = buf[0] - '0';
+ u32 val = buf[0] - '0', state = 0;
- if (n < 1 || state > 3)
+ if (n < 1 || val > 3)
return -EINVAL;
+ /* Convert requested state to ASPM state */
+ if (val & PCIE_LINK_STATE_L0S)
+ state |= ASPM_STATE_L0S;
+ if (val & PCIE_LINK_STATE_L1)
+ state |= ASPM_STATE_L1;
+
down_read(&pci_bus_sem);
mutex_lock(&aspm_lock);
list_for_each_entry(link, &link_list, sibling) {
The L0s state can be managed separately for each direction (upstream direction and downstream direction) of the link. But in the current implementation, those are mixed up. With this patch, L0s for each direction are managed separately. To maintain three states (upstream direction L0s, downstream L0s and L1), 'aspm_support', 'aspm_enabled', 'aspm_capable', 'aspm_disable' and 'aspm_default' fields in struct pcie_link_state are changed to 3-bit from 2-bit. The 'latency' field is separated to two 'latency_up' and 'latency_dw' fields to maintain exit latencies for each direction of the link. For L0, 'latency_up.l0' and 'latency_dw.l0' are used to configure upstream direction L0s and downstream direction L0s respectively. For L1, larger value of 'latency_up.l1' and 'latency_dw.l1' is considered as L1 exit latency. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> --- drivers/pci/pcie/aspm.c | 170 ++++++++++++++++++++++++++++++------------------ 1 file changed, 107 insertions(+), 63 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html