===================================================================
@@ -535,54 +535,12 @@ int pciehp_power_on_slot(struct slot * s
return retval;
}
-static inline int pcie_mask_bad_dllp(struct controller *ctrl)
-{
- struct pci_dev *dev = ctrl->pcie->port;
- int pos;
- u32 reg;
-
- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
- if (!pos)
- return 0;
- pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, ®);
- if (reg & PCI_ERR_COR_BAD_DLLP)
- return 0;
- reg |= PCI_ERR_COR_BAD_DLLP;
- pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg);
- return 1;
-}
-
-static inline void pcie_unmask_bad_dllp(struct controller *ctrl)
-{
- struct pci_dev *dev = ctrl->pcie->port;
- u32 reg;
- int pos;
-
- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
- if (!pos)
- return;
- pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, ®);
- if (!(reg & PCI_ERR_COR_BAD_DLLP))
- return;
- reg &= ~PCI_ERR_COR_BAD_DLLP;
- pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg);
-}
-
int pciehp_power_off_slot(struct slot * slot)
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
u16 cmd_mask;
- int retval = 0;
- int changed;
-
- /*
- * Set Bad DLLP Mask bit in Correctable Error Mask
- * Register. This is the workaround against Bad DLLP error
- * that sometimes happens during turning power off the slot
- * which conforms to PCI Express 1.0a spec.
- */
- changed = pcie_mask_bad_dllp(ctrl);
+ int retval;
slot_cmd = POWER_OFF;
cmd_mask = PCI_EXP_SLTCTL_PCC;
@@ -595,16 +553,11 @@ int pciehp_power_off_slot(struct slot *
retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
if (retval) {
ctrl_err(ctrl, "Write command failed!\n");
- retval = -1;
- goto out;
+ return retval;
}
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n",
__func__, ctrl->cap_base + PCI_EXP_SLTCTL, slot_cmd);
- out:
- if (changed)
- pcie_unmask_bad_dllp(ctrl);
-
- return retval;
+ return 0;
}
static irqreturn_t pcie_isr(int irq, void *dev_id)