diff mbox series

[v3,7/7] arm64: dts: ti: iot2050: Enforce DMA isolation for devices behind PCI RC

Message ID 4cc8a653bb9f22e51d203120601f69aa59a4a09e.1724868080.git.jan.kiszka@siemens.com (mailing list archive)
State Superseded
Headers show
Series soc: ti: Add and use PVU on K3-AM65 for DMA isolation | expand

Commit Message

Jan Kiszka Aug. 28, 2024, 6:01 p.m. UTC 
From: Jan Kiszka <jan.kiszka@siemens.com>

Reserve a 64M memory region below the top of 1G RAM (smallest RAM size
across the series, space left for firmware carve-outs) and ensure that
all PCI devices do their DMA only inside that region. This is configured
via a restricted-dma-pool and enforced with the help of the first PVU.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
 .../arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index e76828ccf21b..8af4bb132a10 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -82,6 +82,11 @@  wdt_reset_memory_region: wdt-memory@a2200000 {
 			reg = <0x00 0xa2200000 0x00 0x1000>;
 			no-map;
 		};
+
+		pci_restricted_dma_region: restricted-dma@ba000000 {
+			compatible = "restricted-dma-pool";
+			reg = <0 0xba000000 0 0x4000000>;
+		};
 	};
 
 	leds {
@@ -571,6 +576,10 @@  seboot-backup@e80000 {
 	};
 };
 
+&pcie0_rc {
+	memory-region = <&pci_restricted_dma_region>;
+};
+
 &pcie1_rc {
 	status = "okay";
 	pinctrl-names = "default";
@@ -580,6 +589,8 @@  &pcie1_rc {
 	phys = <&serdes1 PHY_TYPE_PCIE 0>;
 	phy-names = "pcie-phy0";
 	reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>;
+
+	memory-region = <&pci_restricted_dma_region>;
 };
 
 &mailbox0_cluster0 {
@@ -640,3 +651,7 @@  &mcu_r5fss0 {
 	/* lock-step mode not supported on iot2050 boards */
 	ti,cluster-mode = <0>;
 };
+
+&ti_pvu0 {
+	status = "okay";
+};