| Message ID | 83cfe0c826f1d793e2ead9032ef2109b5efa403a.1529173804.git.lukas@wunner.de (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
[+cc linux-kernel] I assume this would need to be merged along with the rest of the series, which should probably go through the PCI tree, but I'm definitely not qualified to review this IRQ patch. And it would need an ack from Thomas in any case. On Sat, Jun 16, 2018 at 09:25:00PM +0200, Lukas Wunner wrote: > When pciehp is converted to threaded IRQ handling, removal of unplugged > devices below a PCIe hotplug port happens synchronously in the IRQ > thread. Removal of devices typically entails a call to free_irq() by > their drivers. > > If those devices share their IRQ with the hotplug port, free_irq() > deadlocks because it calls synchronize_irq() to wait for all hard IRQ > handlers as well as all threads sharing the IRQ to finish. > > Actually it's sufficient to wait only for the IRQ thread of the removed > device, so call synchronize_hardirq() to wait for all hard IRQ handlers > to finish, but no longer for any threads. Compensate by rearranging the > control flow in irq_wait_for_interrupt() such that the device's thread > is allowed to run one last time after kthread_stop() has been called. > > Stack trace for posterity: > INFO: task irq/17-pciehp:94 blocked for more than 120 seconds. > schedule+0x28/0x80 > synchronize_irq+0x6e/0xa0 > __free_irq+0x15a/0x2b0 > free_irq+0x33/0x70 > pciehp_release_ctrl+0x98/0xb0 > pcie_port_remove_service+0x2f/0x40 > device_release_driver_internal+0x157/0x220 > bus_remove_device+0xe2/0x150 > device_del+0x124/0x340 > device_unregister+0x16/0x60 > remove_iter+0x1a/0x20 > device_for_each_child+0x4b/0x90 > pcie_port_device_remove+0x1e/0x30 > pci_device_remove+0x36/0xb0 > device_release_driver_internal+0x157/0x220 > pci_stop_bus_device+0x7d/0xa0 > pci_stop_bus_device+0x3d/0xa0 > pci_stop_and_remove_bus_device+0xe/0x20 > pciehp_unconfigure_device+0xb8/0x160 > pciehp_disable_slot+0x84/0x130 > pciehp_ist+0x158/0x190 > irq_thread_fn+0x1b/0x50 > irq_thread+0x143/0x1a0 > kthread+0x111/0x130 > > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Mika Westerberg <mika.westerberg@linux.intel.com> > Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> > Cc: Thomas Gleixner <tglx@linutronix.de> > Signed-off-by: Lukas Wunner <lukas@wunner.de> > --- > kernel/irq/manage.c | 21 ++++++++++++++------- > 1 file changed, 14 insertions(+), 7 deletions(-) > > diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c > index daeabd791d58..0531f645bfea 100644 > --- a/kernel/irq/manage.c > +++ b/kernel/irq/manage.c > @@ -790,9 +790,19 @@ static irqreturn_t irq_forced_secondary_handler(int irq, void *dev_id) > > static int irq_wait_for_interrupt(struct irqaction *action) > { > - set_current_state(TASK_INTERRUPTIBLE); > + for (;;) { > + set_current_state(TASK_INTERRUPTIBLE); > > - while (!kthread_should_stop()) { > + if (kthread_should_stop()) { > + /* may need to run one last time. */ > + if (test_and_clear_bit(IRQTF_RUNTHREAD, > + &action->thread_flags)) { > + __set_current_state(TASK_RUNNING); > + return 0; > + } > + __set_current_state(TASK_RUNNING); > + return -1; > + } > > if (test_and_clear_bit(IRQTF_RUNTHREAD, > &action->thread_flags)) { > @@ -800,10 +810,7 @@ static int irq_wait_for_interrupt(struct irqaction *action) > return 0; > } > schedule(); > - set_current_state(TASK_INTERRUPTIBLE); > } > - __set_current_state(TASK_RUNNING); > - return -1; > } > > /* > @@ -1024,7 +1031,7 @@ static int irq_thread(void *data) > /* > * This is the regular exit path. __free_irq() is stopping the > * thread via kthread_stop() after calling > - * synchronize_irq(). So neither IRQTF_RUNTHREAD nor the > + * synchronize_hardirq(). So neither IRQTF_RUNTHREAD nor the > * oneshot mask bit can be set. We cannot verify that as we > * cannot touch the oneshot mask at this point anymore as > * __setup_irq() might have given out currents thread_mask > @@ -1629,7 +1636,7 @@ static struct irqaction *__free_irq(struct irq_desc *desc, void *dev_id) > unregister_handler_proc(irq, action); > > /* Make sure it's not being used on another CPU: */ > - synchronize_irq(irq); > + synchronize_hardirq(irq); > > #ifdef CONFIG_DEBUG_SHIRQ > /* > -- > 2.17.1 >
On Thu, Jul 12, 2018 at 05:21:09PM -0500, Bjorn Helgaas wrote: > On Sat, Jun 16, 2018 at 09:25:00PM +0200, Lukas Wunner wrote: > > When pciehp is converted to threaded IRQ handling, removal of unplugged > > devices below a PCIe hotplug port happens synchronously in the IRQ > > thread. Removal of devices typically entails a call to free_irq() by > > their drivers. > > > > If those devices share their IRQ with the hotplug port, free_irq() > > deadlocks because it calls synchronize_irq() to wait for all hard IRQ > > handlers as well as all threads sharing the IRQ to finish. > > > > Actually it's sufficient to wait only for the IRQ thread of the removed > > device, so call synchronize_hardirq() to wait for all hard IRQ handlers > > to finish, but no longer for any threads. Compensate by rearranging the > > control flow in irq_wait_for_interrupt() such that the device's thread > > is allowed to run one last time after kthread_stop() has been called. > > I assume this would need to be merged along with the rest of the > series, which should probably go through the PCI tree, but I'm > definitely not qualified to review this IRQ patch. And it would need > an ack from Thomas in any case. A v2 of this patch has already been merged through the tip tree on June 24, it's in linux-next as commit 519cc8652b3a, and ISTR that I marked this patch either as "Obsoleted" or "Not Applicable" in pci-patchwork. There was no build-dependency of the succeeding patches in the series on this patch, hence merging through a different tree was possible. Thanks! Lukas
On Fri, Jul 13, 2018 at 09:21:09AM +0200, Lukas Wunner wrote: > On Thu, Jul 12, 2018 at 05:21:09PM -0500, Bjorn Helgaas wrote: > > On Sat, Jun 16, 2018 at 09:25:00PM +0200, Lukas Wunner wrote: > > > When pciehp is converted to threaded IRQ handling, removal of unplugged > > > devices below a PCIe hotplug port happens synchronously in the IRQ > > > thread. Removal of devices typically entails a call to free_irq() by > > > their drivers. > > > > > > If those devices share their IRQ with the hotplug port, free_irq() > > > deadlocks because it calls synchronize_irq() to wait for all hard IRQ > > > handlers as well as all threads sharing the IRQ to finish. > > > > > > Actually it's sufficient to wait only for the IRQ thread of the removed > > > device, so call synchronize_hardirq() to wait for all hard IRQ handlers > > > to finish, but no longer for any threads. Compensate by rearranging the > > > control flow in irq_wait_for_interrupt() such that the device's thread > > > is allowed to run one last time after kthread_stop() has been called. > > > > I assume this would need to be merged along with the rest of the > > series, which should probably go through the PCI tree, but I'm > > definitely not qualified to review this IRQ patch. And it would need > > an ack from Thomas in any case. > > A v2 of this patch has already been merged through the tip tree on June 24, > it's in linux-next as commit 519cc8652b3a, and ISTR that I marked this patch > either as "Obsoleted" or "Not Applicable" in pci-patchwork. There was no > build-dependency of the succeeding patches in the series on this patch, > hence merging through a different tree was possible. Perfect, thanks!
On Fri, Jul 13, 2018 at 09:21:09AM +0200, Lukas Wunner wrote: > On Thu, Jul 12, 2018 at 05:21:09PM -0500, Bjorn Helgaas wrote: > > On Sat, Jun 16, 2018 at 09:25:00PM +0200, Lukas Wunner wrote: > > > When pciehp is converted to threaded IRQ handling, removal of unplugged > > > devices below a PCIe hotplug port happens synchronously in the IRQ > > > thread. Removal of devices typically entails a call to free_irq() by > > > their drivers. > > > > > > If those devices share their IRQ with the hotplug port, free_irq() > > > deadlocks because it calls synchronize_irq() to wait for all hard IRQ > > > handlers as well as all threads sharing the IRQ to finish. > > > > > > Actually it's sufficient to wait only for the IRQ thread of the removed > > > device, so call synchronize_hardirq() to wait for all hard IRQ handlers > > > to finish, but no longer for any threads. Compensate by rearranging the > > > control flow in irq_wait_for_interrupt() such that the device's thread > > > is allowed to run one last time after kthread_stop() has been called. > > > > I assume this would need to be merged along with the rest of the > > series, which should probably go through the PCI tree, but I'm > > definitely not qualified to review this IRQ patch. And it would need > > an ack from Thomas in any case. > > A v2 of this patch has already been merged through the tip tree on June 24, > it's in linux-next as commit 519cc8652b3a, and ISTR that I marked this patch > either as "Obsoleted" or "Not Applicable" in pci-patchwork. There was no > build-dependency of the succeeding patches in the series on this patch, > hence merging through a different tree was possible. Great! Do I need to make sure the tip tree is merged before the PCI tree during the merge window?
On Mon, Jul 16, 2018 at 07:37:19AM -0500, Bjorn Helgaas wrote: > On Fri, Jul 13, 2018 at 09:21:09AM +0200, Lukas Wunner wrote: > > On Thu, Jul 12, 2018 at 05:21:09PM -0500, Bjorn Helgaas wrote: > > > On Sat, Jun 16, 2018 at 09:25:00PM +0200, Lukas Wunner wrote: > > > > When pciehp is converted to threaded IRQ handling, removal of unplugged > > > > devices below a PCIe hotplug port happens synchronously in the IRQ > > > > thread. Removal of devices typically entails a call to free_irq() by > > > > their drivers. > > > > > > > > If those devices share their IRQ with the hotplug port, free_irq() > > > > deadlocks because it calls synchronize_irq() to wait for all hard IRQ > > > > handlers as well as all threads sharing the IRQ to finish. > > > > > > > > Actually it's sufficient to wait only for the IRQ thread of the removed > > > > device, so call synchronize_hardirq() to wait for all hard IRQ handlers > > > > to finish, but no longer for any threads. Compensate by rearranging the > > > > control flow in irq_wait_for_interrupt() such that the device's thread > > > > is allowed to run one last time after kthread_stop() has been called. > > > > > > I assume this would need to be merged along with the rest of the > > > series, which should probably go through the PCI tree, but I'm > > > definitely not qualified to review this IRQ patch. And it would need > > > an ack from Thomas in any case. > > > > A v2 of this patch has already been merged through the tip tree on June 24, > > it's in linux-next as commit 519cc8652b3a, and ISTR that I marked this patch > > either as "Obsoleted" or "Not Applicable" in pci-patchwork. There was no > > build-dependency of the succeeding patches in the series on this patch, > > hence merging through a different tree was possible. > > Great! Do I need to make sure the tip tree is merged before the PCI > tree during the merge window? In theory the tip tree would have to be merged beforehand, but in practice the odds are extremely low that someone with an affected machine (primarily a Mac introduced 2011/2012) happens to unplug a PCI device during a bisect while running a kernel which has the pci tree merged but not the tip tree. So I wouldn't worry about it. Thanks, Lukas
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index daeabd791d58..0531f645bfea 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -790,9 +790,19 @@ static irqreturn_t irq_forced_secondary_handler(int irq, void *dev_id) static int irq_wait_for_interrupt(struct irqaction *action) { - set_current_state(TASK_INTERRUPTIBLE); + for (;;) { + set_current_state(TASK_INTERRUPTIBLE); - while (!kthread_should_stop()) { + if (kthread_should_stop()) { + /* may need to run one last time. */ + if (test_and_clear_bit(IRQTF_RUNTHREAD, + &action->thread_flags)) { + __set_current_state(TASK_RUNNING); + return 0; + } + __set_current_state(TASK_RUNNING); + return -1; + } if (test_and_clear_bit(IRQTF_RUNTHREAD, &action->thread_flags)) { @@ -800,10 +810,7 @@ static int irq_wait_for_interrupt(struct irqaction *action) return 0; } schedule(); - set_current_state(TASK_INTERRUPTIBLE); } - __set_current_state(TASK_RUNNING); - return -1; } /* @@ -1024,7 +1031,7 @@ static int irq_thread(void *data) /* * This is the regular exit path. __free_irq() is stopping the * thread via kthread_stop() after calling - * synchronize_irq(). So neither IRQTF_RUNTHREAD nor the + * synchronize_hardirq(). So neither IRQTF_RUNTHREAD nor the * oneshot mask bit can be set. We cannot verify that as we * cannot touch the oneshot mask at this point anymore as * __setup_irq() might have given out currents thread_mask @@ -1629,7 +1636,7 @@ static struct irqaction *__free_irq(struct irq_desc *desc, void *dev_id) unregister_handler_proc(irq, action); /* Make sure it's not being used on another CPU: */ - synchronize_irq(irq); + synchronize_hardirq(irq); #ifdef CONFIG_DEBUG_SHIRQ /*
When pciehp is converted to threaded IRQ handling, removal of unplugged devices below a PCIe hotplug port happens synchronously in the IRQ thread. Removal of devices typically entails a call to free_irq() by their drivers. If those devices share their IRQ with the hotplug port, free_irq() deadlocks because it calls synchronize_irq() to wait for all hard IRQ handlers as well as all threads sharing the IRQ to finish. Actually it's sufficient to wait only for the IRQ thread of the removed device, so call synchronize_hardirq() to wait for all hard IRQ handlers to finish, but no longer for any threads. Compensate by rearranging the control flow in irq_wait_for_interrupt() such that the device's thread is allowed to run one last time after kthread_stop() has been called. Stack trace for posterity: INFO: task irq/17-pciehp:94 blocked for more than 120 seconds. schedule+0x28/0x80 synchronize_irq+0x6e/0xa0 __free_irq+0x15a/0x2b0 free_irq+0x33/0x70 pciehp_release_ctrl+0x98/0xb0 pcie_port_remove_service+0x2f/0x40 device_release_driver_internal+0x157/0x220 bus_remove_device+0xe2/0x150 device_del+0x124/0x340 device_unregister+0x16/0x60 remove_iter+0x1a/0x20 device_for_each_child+0x4b/0x90 pcie_port_device_remove+0x1e/0x30 pci_device_remove+0x36/0xb0 device_release_driver_internal+0x157/0x220 pci_stop_bus_device+0x7d/0xa0 pci_stop_bus_device+0x3d/0xa0 pci_stop_and_remove_bus_device+0xe/0x20 pciehp_unconfigure_device+0xb8/0x160 pciehp_disable_slot+0x84/0x130 pciehp_ist+0x158/0x190 irq_thread_fn+0x1b/0x50 irq_thread+0x143/0x1a0 kthread+0x111/0x130 Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> --- kernel/irq/manage.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)