diff mbox series

x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API

Message ID 99656452963ba3c63a6cb12e151279d81da365eb.1629658069.git.christophe.jaillet@wanadoo.fr (mailing list archive)
State Accepted
Delegated to: Bjorn Helgaas
Headers show
Series x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API | expand

Commit Message

Christophe JAILLET Aug. 22, 2021, 6:49 p.m. UTC
The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below.

It has been hand modified to use 'dma_set_mask_and_coherent()' instead of
'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable.
This is less verbose.

It has been compile tested.


@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
If needed, see post from Christoph Hellwig on the kernel-janitors ML:
   https://marc.info/?l=kernel-janitors&m=158745678307186&w=4
---
 arch/x86/pci/sta2x11-fixup.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

Comments

Bjorn Helgaas Sept. 2, 2021, 4:40 p.m. UTC | #1
[+cc Christoph]

On Sun, Aug 22, 2021 at 08:49:20PM +0200, Christophe JAILLET wrote:
> The wrappers in include/linux/pci-dma-compat.h should go away.
> ...

> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

Applied to pci/misc for v5.15, thanks!

> ---
> If needed, see post from Christoph Hellwig on the kernel-janitors ML:
>    https://marc.info/?l=kernel-janitors&m=158745678307186&w=4
> ---
>  arch/x86/pci/sta2x11-fixup.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/arch/x86/pci/sta2x11-fixup.c b/arch/x86/pci/sta2x11-fixup.c
> index 7d2525691854..101081ad64b6 100644
> --- a/arch/x86/pci/sta2x11-fixup.c
> +++ b/arch/x86/pci/sta2x11-fixup.c
> @@ -146,8 +146,7 @@ static void sta2x11_map_ep(struct pci_dev *pdev)
>  		dev_err(dev, "sta2x11: could not set DMA offset\n");
>  
>  	dev->bus_dma_limit = max_amba_addr;
> -	pci_set_consistent_dma_mask(pdev, max_amba_addr);
> -	pci_set_dma_mask(pdev, max_amba_addr);
> +	dma_set_mask_and_coherent(&pdev->dev, max_amba_addr);
>  
>  	/* Configure AHB mapping */
>  	pci_write_config_dword(pdev, AHB_PEXLBASE(0), 0);
> -- 
> 2.30.2
>
diff mbox series

Patch

diff --git a/arch/x86/pci/sta2x11-fixup.c b/arch/x86/pci/sta2x11-fixup.c
index 7d2525691854..101081ad64b6 100644
--- a/arch/x86/pci/sta2x11-fixup.c
+++ b/arch/x86/pci/sta2x11-fixup.c
@@ -146,8 +146,7 @@  static void sta2x11_map_ep(struct pci_dev *pdev)
 		dev_err(dev, "sta2x11: could not set DMA offset\n");
 
 	dev->bus_dma_limit = max_amba_addr;
-	pci_set_consistent_dma_mask(pdev, max_amba_addr);
-	pci_set_dma_mask(pdev, max_amba_addr);
+	dma_set_mask_and_coherent(&pdev->dev, max_amba_addr);
 
 	/* Configure AHB mapping */
 	pci_write_config_dword(pdev, AHB_PEXLBASE(0), 0);