From patchwork Mon Mar 18 15:56:02 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jiri Kosina X-Patchwork-Id: 2293821 X-Patchwork-Delegate: bhelgaas@google.com Return-Path: X-Original-To: patchwork-linux-pci@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork2.kernel.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by patchwork2.kernel.org (Postfix) with ESMTP id 1AD3DDF215 for ; Mon, 18 Mar 2013 15:56:13 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752223Ab3CRP4M (ORCPT ); Mon, 18 Mar 2013 11:56:12 -0400 Received: from cantor2.suse.de ([195.135.220.15]:51195 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751383Ab3CRP4L (ORCPT ); Mon, 18 Mar 2013 11:56:11 -0400 Received: from relay2.suse.de (unknown [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id 391CAA520E; Mon, 18 Mar 2013 16:56:06 +0100 (CET) Date: Mon, 18 Mar 2013 16:56:02 +0100 (CET) From: Jiri Kosina To: Daniel Vetter , Chris Wilson Cc: Greg KH , Harald Arnesen , Kernel development list , "Rafael J. Wysocki" , Peter Hurley , Alan Stern , Thomas Meyer , Shawn Starr , USB list , linux-acpi@vger.kernel.org, Bjorn Helgaas , linux-pci@vger.kernel.org, Yinghai Lu , Daniel Vetter , Imre Deak , Daniel Kurtz , dri-devel@lists.freedesktop.org Subject: [PATCH] drm/i915: stop using GMBUS IRQs on Gen4 chips (was Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses)) In-Reply-To: <20130318082156.GO9021@phenom.ffwll.local> Message-ID: References: <1460519.ejNFI1DrGk@vostro.rjw.lan> <1363280764.26318.4.camel@thor.lan> <5657408.cYX6iimiA4@vostro.rjw.lan> <5142E7F0.4020002@gmail.com> <20130315153249.GA32425@kroah.com> <20130315154739.GA1024@kroah.com> <20130318082156.GO9021@phenom.ffwll.local> User-Agent: Alpine 2.00 (LNX 1167 2008-08-23) MIME-Version: 1.0 Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Okay, so I think that for 3.9 we want the patch below, and if eventually hardware root cause / workaround is found for GM45, we can have it merged later. From: Jiri Kosina Subject: [PATCH] drm/i915: stop using GMBUS IRQs on Gen4 chips Commit 28c70f162 ("drm/i915: use the gmbus irq for waits") switched to using GMBUS irqs instead of GPIO bit-banging for chipset generations 4 and above. It turns out though that on many systems this leads to spurious interrupts being generated, long after the register write to disable the IRQs has been issued. Flushing of the register writes by POSTING_READ() directly after the register write doesn't work either. Disable using of GMBUS IRQs on Gen4 systems before the root cause is found and revert back to old behavior. Also be more careful about not issuing GMBUS4 register reads in gmbus_wait_hw_status() if we are not using GMBUS IRQs. Signed-off-by: Jiri Kosina --- drivers/gpu/drm/i915/intel_i2c.c | 12 ++++++++++-- 1 files changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index acf8aec..8638036 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -58,12 +58,14 @@ to_intel_gmbus(struct i2c_adapter *i2c) return container_of(i2c, struct intel_gmbus, adapter); } +#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 5) void intel_i2c_reset(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; I915_WRITE(dev_priv->gpio_mmio_base + GMBUS0, 0); - I915_WRITE(dev_priv->gpio_mmio_base + GMBUS4, 0); + if (HAS_GMBUS_IRQ(dev)) + I915_WRITE(dev_priv->gpio_mmio_base + GMBUS4, 0); } static void intel_i2c_quirk_set(struct drm_i915_private *dev_priv, bool enable) @@ -203,7 +205,6 @@ intel_gpio_setup(struct intel_gmbus *bus, u32 pin) algo->data = bus; } -#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 4) static int gmbus_wait_hw_status(struct drm_i915_private *dev_priv, u32 gmbus2_status, @@ -214,6 +215,13 @@ gmbus_wait_hw_status(struct drm_i915_private *dev_priv, u32 gmbus2 = 0; DEFINE_WAIT(wait); + if (!HAS_GMBUS_IRQ(dev_priv->dev)) { + int ret; + ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) & + (GMBUS_SATOER | gmbus2_status), + 50); + return ret; + } /* Important: The hw handles only the first bit, so set only one! Since * we also need to check for NAKs besides the hw ready/idle signal, we * need to wake up periodically and check that ourselves. */