| Message ID | ccb214ae-4c51-46b0-85f0-dba7ebe77743@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | PCI: Annotate pci_cache_line_size variables as __ro_after_init | expand |
On Sat, Apr 13, 2024 at 11:05:52PM +0200, Heiner Kallweit wrote: > Annotate both variables as __ro_after_init, enforcing that they can't > be changed after the init phase. > > Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> > --- > drivers/pci/pci.c | 4 ++-- > include/linux/pci.h | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index 5f8edba78..e7ac4474b 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -142,8 +142,8 @@ enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_DEFAULT; > * the dfl or actual value as it sees fit. Don't forget this is > * measured in 32-bit words, not bytes. > */ > -u8 pci_dfl_cache_line_size = L1_CACHE_BYTES >> 2; > -u8 pci_cache_line_size; > +u8 pci_dfl_cache_line_size __ro_after_init = L1_CACHE_BYTES >> 2; > +u8 pci_cache_line_size __ro_after_init; > > /* > * If we set up a device for bus mastering, we need to check the latency > diff --git a/include/linux/pci.h b/include/linux/pci.h > index 69b10f2fb..cf63be0c9 100644 > --- a/include/linux/pci.h > +++ b/include/linux/pci.h > @@ -2334,8 +2334,8 @@ extern int pci_pci_problems; > > extern unsigned long pci_cardbus_io_size; > extern unsigned long pci_cardbus_mem_size; > -extern u8 pci_dfl_cache_line_size; > -extern u8 pci_cache_line_size; > +extern u8 pci_dfl_cache_line_size __ro_after_init; > +extern u8 pci_cache_line_size __ro_after_init; Is __ro_after_init required on the declaration, too? I see a few uses in .h files, but not very many, and I would think it would be a linker thing that applies to the definition, where space is allocated. > /* Architecture-specific versions may override these (weak) */ > void pcibios_disable_device(struct pci_dev *dev); > -- > 2.44.0 >
On 17.04.2024 17:50, Bjorn Helgaas wrote: > On Sat, Apr 13, 2024 at 11:05:52PM +0200, Heiner Kallweit wrote: >> Annotate both variables as __ro_after_init, enforcing that they can't >> be changed after the init phase. >> >> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> >> --- >> drivers/pci/pci.c | 4 ++-- >> include/linux/pci.h | 4 ++-- >> 2 files changed, 4 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c >> index 5f8edba78..e7ac4474b 100644 >> --- a/drivers/pci/pci.c >> +++ b/drivers/pci/pci.c >> @@ -142,8 +142,8 @@ enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_DEFAULT; >> * the dfl or actual value as it sees fit. Don't forget this is >> * measured in 32-bit words, not bytes. >> */ >> -u8 pci_dfl_cache_line_size = L1_CACHE_BYTES >> 2; >> -u8 pci_cache_line_size; >> +u8 pci_dfl_cache_line_size __ro_after_init = L1_CACHE_BYTES >> 2; >> +u8 pci_cache_line_size __ro_after_init; >> >> /* >> * If we set up a device for bus mastering, we need to check the latency >> diff --git a/include/linux/pci.h b/include/linux/pci.h >> index 69b10f2fb..cf63be0c9 100644 >> --- a/include/linux/pci.h >> +++ b/include/linux/pci.h >> @@ -2334,8 +2334,8 @@ extern int pci_pci_problems; >> >> extern unsigned long pci_cardbus_io_size; >> extern unsigned long pci_cardbus_mem_size; >> -extern u8 pci_dfl_cache_line_size; >> -extern u8 pci_cache_line_size; >> +extern u8 pci_dfl_cache_line_size __ro_after_init; >> +extern u8 pci_cache_line_size __ro_after_init; > > Is __ro_after_init required on the declaration, too? I see a few uses > in .h files, but not very many, and I would think it would be a linker > thing that applies to the definition, where space is allocated. > You're right, it's not needed on the declaration. I'll submit a v2. >> /* Architecture-specific versions may override these (weak) */ >> void pcibios_disable_device(struct pci_dev *dev); >> -- >> 2.44.0 >>
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 5f8edba78..e7ac4474b 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -142,8 +142,8 @@ enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_DEFAULT; * the dfl or actual value as it sees fit. Don't forget this is * measured in 32-bit words, not bytes. */ -u8 pci_dfl_cache_line_size = L1_CACHE_BYTES >> 2; -u8 pci_cache_line_size; +u8 pci_dfl_cache_line_size __ro_after_init = L1_CACHE_BYTES >> 2; +u8 pci_cache_line_size __ro_after_init; /* * If we set up a device for bus mastering, we need to check the latency diff --git a/include/linux/pci.h b/include/linux/pci.h index 69b10f2fb..cf63be0c9 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -2334,8 +2334,8 @@ extern int pci_pci_problems; extern unsigned long pci_cardbus_io_size; extern unsigned long pci_cardbus_mem_size; -extern u8 pci_dfl_cache_line_size; -extern u8 pci_cache_line_size; +extern u8 pci_dfl_cache_line_size __ro_after_init; +extern u8 pci_cache_line_size __ro_after_init; /* Architecture-specific versions may override these (weak) */ void pcibios_disable_device(struct pci_dev *dev);
Annotate both variables as __ro_after_init, enforcing that they can't be changed after the init phase. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/pci/pci.c | 4 ++-- include/linux/pci.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)