mbox series

[0/6] Enable IPQ5018 PCI support

Message ID 20231003120846.28626-1-quic_nsekar@quicinc.com
Headers show
Series Enable IPQ5018 PCI support | expand

Message

Nitheesh Sekar Oct. 3, 2023, 12:08 p.m. UTC 
This patch series adds the relevant phy and controller
DT configurations for enabling PCI gen2 support
on IPQ5018.

Nitheesh Sekar (6):
  dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy
  dt-bindings: PCI: qcom: Add IPQ5108 SoC
  phy: qcom: Introduce PCIe UNIPHY 28LP driver
  PCI: qcom: Add support for IPQ5018
  arm64: dts: qcom: ipq5018: Add PCIe related nodes
  arm64: dts: qcom: ipq5018: Enable PCIe

 .../devicetree/bindings/pci/qcom,pcie.yaml    |  36 ++
 .../bindings/phy/qcom,uniphy-pcie-28lp.yaml   |  77 ++++
 .../arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts |   9 +
 arch/arm64/boot/dts/qcom/ipq5018.dtsi         | 186 +++++++++-
 drivers/pci/controller/dwc/pcie-qcom.c        |  22 +-
 drivers/phy/qualcomm/Kconfig                  |  12 +
 drivers/phy/qualcomm/Makefile                 |   1 +
 .../phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c  | 336 ++++++++++++++++++
 8 files changed, 663 insertions(+), 16 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml
 create mode 100644 drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c