mbox series

[0/7] USB31DRD phy support for Google Tensor gs101 (HS & SS)

Message ID 20240423-usb-phy-gs101-v1-0-ebdcb3ac174d@linaro.org
Headers show
Series USB31DRD phy support for Google Tensor gs101 (HS & SS) | expand

Message

André Draszik April 23, 2024, 5:06 p.m. UTC 
This patch series add support for the Exynos USB 3.1 DRD combo phy, as found
in Exynos 9 SoCs like Google GS101. It supports USB SS, HS and DisplayPort,
but DisplayPort is out of scope for this series.

In terms of UTMI+, this is very similar to the existing Exynos850
support in this driver. The difference is that it supports both UTMI+
(HS) and PIPE3 (SS). Firstly, there are some preparatory patches to simplify
addition, while the bulk of the changes is around the SS part.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
---
André Draszik (7):
      dt-bindings: phy: samsung,usb3-drd-phy: add gs101 compatible
      phy: exynos5-usbdrd: use exynos_get_pmu_regmap_by_phandle() for PMU regs
      phy: exynos5-usbdrd: support isolating HS and SS ports independently
      phy: exynos5-usbdrd: set ref clk freq in exynos850_usbdrd_utmi_init()
      phy: exynos5-usbdrd: uniform order of register bit macros
      phy: exynos5-usbdrd: convert to clk_bulk for phy (register) access
      phy: exynos5-usbdrd: support Exynos USBDRD 3.1 combo phy (HS & SS)

 .../bindings/phy/samsung,usb3-drd-phy.yaml         |  78 ++-
 drivers/phy/samsung/Kconfig                        |   1 -
 drivers/phy/samsung/phy-exynos5-usbdrd.c           | 753 +++++++++++++++++++--
 include/linux/soc/samsung/exynos-regs-pmu.h        |   4 +
 4 files changed, 757 insertions(+), 79 deletions(-)
---
base-commit: a59668a9397e7245b26e9be85d23f242ff757ae8
change-id: 20240423-usb-phy-gs101-abf3e172d1c4

Best regards,