| Message ID | 1627459111-2907-1-git-send-email-chunfeng.yun@mediatek.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [1/9] dt-bindings: phy: mediatek: tphy: support type switch by pericfg | expand |
On Wed, 28 Jul 2021 15:58:23 +0800, Chunfeng Yun wrote: > Add support type switch by pericfg register between USB3, PCIe, > SATA, SGMII, this is used to replace the way through efuse or > jumper. > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > --- > .../devicetree/bindings/phy/mediatek,tphy.yaml | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml index 838852cb8527..9e6c0f43f1c6 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -201,6 +201,22 @@ patternProperties: Specify the flag to enable BC1.2 if support it type: boolean + mediatek,syscon-type: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + description: + A phandle to syscon used to access the register of type switch, + the field should always be 3 cells long. + items: + items: + - description: + The first cell represents a phandle to syscon + - description: + The second cell represents the register offset + - description: + The third cell represents the index of config segment + enum: [0, 1, 2, 3] + required: - reg - "#phy-cells"
Add support type switch by pericfg register between USB3, PCIe, SATA, SGMII, this is used to replace the way through efuse or jumper. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- .../devicetree/bindings/phy/mediatek,tphy.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)