@@ -4042,6 +4042,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
F: Documentation/devicetree/bindings/net/can/
F: Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
F: drivers/net/can/
+F: drivers/phy/phy-can-transceiver.c
F: include/linux/can/bittiming.h
F: include/linux/can/dev.h
F: include/linux/can/led.h
@@ -61,6 +61,15 @@ config USB_LGM_PHY
interface to interact with USB GEN-II and USB 3.x PHY that is part
of the Intel network SOC.
+config PHY_CAN_TRANSCEIVER
+ tristate "CAN transceiver PHY"
+ select GENERIC_PHY
+ help
+ This option enables support for CAN transceivers as a PHY. This
+ driver provides function for putting the transceivers in various
+ functional modes using gpios and sets the attribute max link
+ rate, for CAN drivers.
+
source "drivers/phy/allwinner/Kconfig"
source "drivers/phy/amlogic/Kconfig"
source "drivers/phy/broadcom/Kconfig"
@@ -5,6 +5,7 @@
obj-$(CONFIG_GENERIC_PHY) += phy-core.o
obj-$(CONFIG_GENERIC_PHY_MIPI_DPHY) += phy-core-mipi-dphy.o
+obj-$(CONFIG_PHY_CAN_TRANSCEIVER) += phy-can-transceiver.o
obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
new file mode 100644
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * phy-can-transceiver.c - phy driver for CAN transceivers
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com
+ *
+ */
+#include<linux/phy/phy.h>
+#include<linux/platform_device.h>
+#include<linux/module.h>
+#include<linux/gpio.h>
+#include<linux/gpio/consumer.h>
+
+struct can_transceiver_data {
+ u32 flags;
+#define CAN_TRANSCEIVER_STB_PRESENT BIT(0)
+#define CAN_TRANSCEIVER_EN_PRESENT BIT(1)
+};
+
+struct can_transceiver_phy {
+ struct phy *generic_phy;
+ struct gpio_desc *standby_gpio;
+ struct gpio_desc *enable_gpio;
+};
+
+/* Power on function */
+static int can_transceiver_phy_power_on(struct phy *phy)
+{
+ struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy);
+
+ if (can_transceiver_phy->standby_gpio)
+ gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 0);
+ if (can_transceiver_phy->enable_gpio)
+ gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 1);
+
+ return 0;
+}
+
+/* Power off function */
+static int can_transceiver_phy_power_off(struct phy *phy)
+{
+ struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy);
+
+ if (can_transceiver_phy->standby_gpio)
+ gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 1);
+ if (can_transceiver_phy->enable_gpio)
+ gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 0);
+
+ return 0;
+}
+
+static const struct phy_ops can_transceiver_phy_ops = {
+ .power_on = can_transceiver_phy_power_on,
+ .power_off = can_transceiver_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct can_transceiver_data tcan1042_drvdata = {
+ .flags = CAN_TRANSCEIVER_STB_PRESENT,
+};
+
+static const struct can_transceiver_data tcan1043_drvdata = {
+ .flags = CAN_TRANSCEIVER_STB_PRESENT | CAN_TRANSCEIVER_EN_PRESENT,
+};
+
+static const struct of_device_id can_transceiver_phy_ids[] = {
+ {
+ .compatible = "ti,tcan1042",
+ .data = &tcan1042_drvdata
+ },
+ {
+ .compatible = "ti,tcan1043",
+ .data = &tcan1043_drvdata
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, can_transceiver_phy_ids);
+
+static int can_transceiver_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct can_transceiver_phy *can_transceiver_phy;
+ const struct can_transceiver_data *drvdata;
+ const struct of_device_id *match;
+ struct phy *phy;
+ struct gpio_desc *standby_gpio;
+ struct gpio_desc *enable_gpio;
+ u32 max_bitrate = 0;
+
+ can_transceiver_phy = devm_kzalloc(dev, sizeof(struct can_transceiver_phy), GFP_KERNEL);
+ if (!can_transceiver_phy)
+ return -ENOMEM;
+
+ match = of_match_node(can_transceiver_phy_ids, pdev->dev.of_node);
+ drvdata = match->data;
+
+ phy = devm_phy_create(dev, dev->of_node,
+ &can_transceiver_phy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create can transceiver phy\n");
+ return PTR_ERR(phy);
+ }
+
+ device_property_read_u32(dev, "max-bitrate", &max_bitrate);
+ if (!max_bitrate)
+ dev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit\n");
+ phy->attrs.max_link_rate = max_bitrate;
+
+ can_transceiver_phy->generic_phy = phy;
+
+ if (drvdata->flags & CAN_TRANSCEIVER_STB_PRESENT) {
+ standby_gpio = devm_gpiod_get(dev, "standby", GPIOD_OUT_HIGH);
+ if (IS_ERR(standby_gpio))
+ return PTR_ERR(standby_gpio);
+ can_transceiver_phy->standby_gpio = standby_gpio;
+ }
+
+ if (drvdata->flags & CAN_TRANSCEIVER_EN_PRESENT) {
+ enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(enable_gpio))
+ return PTR_ERR(enable_gpio);
+ can_transceiver_phy->enable_gpio = enable_gpio;
+ }
+
+ phy_set_drvdata(can_transceiver_phy->generic_phy, can_transceiver_phy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver can_transceiver_phy_driver = {
+ .probe = can_transceiver_phy_probe,
+ .driver = {
+ .name = "can-transceiver-phy",
+ .of_match_table = can_transceiver_phy_ids,
+ },
+};
+
+module_platform_driver(can_transceiver_phy_driver);
+
+MODULE_AUTHOR("Faiz Abbas <faiz_abbas@ti.com>");
+MODULE_AUTHOR("Aswath Govindraju <a-govindraju@ti.com>");
+MODULE_DESCRIPTION("CAN TRANSCEIVER PHY driver");
+MODULE_LICENSE("GPL v2");