diff mbox series

[RESEND,v2,1/2] dt-bindings: phy: add vbus-supply optional property to phy-stm32-usbphyc

Message ID 20210517120821.26466-2-amelie.delaunay@foss.st.com
State Accepted
Commit 436b6403db532e3d29cff554a95f448f7f11a165
Headers show
Series STM32 USBPHYC vbus-supply property support | expand

Commit Message

Amelie Delaunay May 17, 2021, 12:08 p.m. UTC 
This patch adds vbus-supply optional property to phy sub-nodes using
connector node.
A regulator for USB VBUS may be needed for host mode.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
---
Changes in v2:
- add connector vbus-supply property as suggested by Rob
---
 .../devicetree/bindings/phy/phy-stm32-usbphyc.yaml    | 11 +++++++++++
 1 file changed, 11 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
index 018cc1246ee1..3329f1d33a4f 100644
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@@ -74,6 +74,13 @@  patternProperties:
       "#phy-cells":
         enum: [ 0x0, 0x1 ]
 
+      connector:
+        type: object
+        allOf:
+          - $ref: ../connector/usb-connector.yaml
+        properties:
+          vbus-supply: true
+
     allOf:
       - if:
           properties:
@@ -130,6 +137,10 @@  examples:
             reg = <0>;
             phy-supply = <&vdd_usb>;
             #phy-cells = <0>;
+            connector {
+                compatible = "usb-a-connector";
+                vbus-supply = <&vbus_sw>;
+            };
         };
 
         usbphyc_port1: usb-phy@1 {