[2/2] phy: qcom: qmp: Add SC8180x USB/DP combo

Commit Message

Bjorn Andersson July 21, 2021, 10:56 p.m. UTC

The two USB QMPs are USB/DP compbo PHYs, add the compatible for this
combination to allow DP output.

Signed-off-by: Bjorn Andersson <[e-mail]>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 47 +++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 2195f8ac393b..5e302830d061 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -3536,6 +3536,46 @@  static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
 	.pwrdn_delay_max	= 1005,		/* us */
 };
 
+static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
+	.type			= PHY_TYPE_DP,
+	.nlanes			= 1,
+
+	.serdes_tbl		= qmp_v4_dp_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
+	.tx_tbl			= qmp_v4_dp_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(qmp_v4_dp_tx_tbl),
+
+	.serdes_tbl_rbr		= qmp_v4_dp_serdes_tbl_rbr,
+	.serdes_tbl_rbr_num	= ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
+	.serdes_tbl_hbr		= qmp_v4_dp_serdes_tbl_hbr,
+	.serdes_tbl_hbr_num	= ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
+	.serdes_tbl_hbr2	= qmp_v4_dp_serdes_tbl_hbr2,
+	.serdes_tbl_hbr2_num	= ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
+	.serdes_tbl_hbr3	= qmp_v4_dp_serdes_tbl_hbr3,
+	.serdes_tbl_hbr3_num	= ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
+
+	.clk_list		= qmp_v3_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(qmp_v3_phy_clk_l),
+	.reset_list		= sc7180_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(sc7180_usb3phy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= qmp_v3_usb3phy_regs_layout,
+
+	.has_phy_dp_com_ctrl	= true,
+	.is_dual_lane_phy	= true,
+
+	.dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+	.configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+	.configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+	.calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+};
+
+static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
+	.usb_cfg		= &sm8150_usb3phy_cfg,
+	.dp_cfg			= &sc8180x_dpphy_cfg,
+};
+
 static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
 	.type			= PHY_TYPE_USB3,
 	.nlanes			= 1,
@@ -5377,6 +5417,9 @@  static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
 	}, {
 		.compatible = "qcom,sc8180x-qmp-usb3-phy",
 		.data = &sm8150_usb3phy_cfg,
+	}, {
+		.compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
+		/* It's a combo phy */
 	}, {
 		.compatible = "qcom,sdm845-qhp-pcie-phy",
 		.data = &sdm845_qhp_pciephy_cfg,
@@ -5454,6 +5497,10 @@  static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = {
 		.compatible = "qcom,sm8250-qmp-usb3-dp-phy",
 		.data = &sm8250_usb3dpphy_cfg,
 	},
+	{
+		.compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
+		.data = &sc8180x_usb3dpphy_cfg,
+	},
 	{ }
 };