From patchwork Wed Oct 27 11:55:16 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "A, Rashmi" X-Patchwork-Id: 12587111 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id B5B02C433F5 for ; Wed, 27 Oct 2021 11:56:23 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 77125610A0 for ; Wed, 27 Oct 2021 11:56:23 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.1 mail.kernel.org 77125610A0 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=intel.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:MIME-Version:List-Subscribe:List-Help: List-Post:List-Archive:List-Unsubscribe:List-Id:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=ngNLAoLWYb3mw6fZyuzLCF1/gNDI6yE5gkiq5lEuz18=; b=AnaeroIx9BXTi0 ZcyTbJm2fLXNLTwrf8zs8oJ0zQmAjpDd9Oh6+Igf0itKtC/dZmXHlO0GAYHw0iydxT3kfzMfs7gX1 O6YqmWwblOVpsuAOu6r3LM41kARhxQoToW6eskUOtoNuld5gM6186rcHtQkeK0Y5jZ+ruufcNzzIH raBe3sdo74QxMj96AsyNPrfqzLrR9/sxbfrUq5AWHZbCMYy2Tk8vjNZ1FzdjpznTfGroPDKCEgfdc rQLoAIxMpjM8h7kXMtq1QiA+h0iKPrqw6BVIuwLGpn7jlUq9k81El9NIqE8tGR8o/etYAM5wB7yq5 Hw44UQ+VCeNu+drlvO9w==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1mfhXa-004nP1-SF; Wed, 27 Oct 2021 11:56:22 +0000 Received: from mga18.intel.com ([134.134.136.126]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1mfhWz-004n9i-PC; Wed, 27 Oct 2021 11:55:48 +0000 X-IronPort-AV: E=McAfee;i="6200,9189,10149"; a="217052150" X-IronPort-AV: E=Sophos;i="5.87,186,1631602800"; d="scan'208";a="217052150" Received: from orsmga004.jf.intel.com ([10.7.209.38]) by orsmga106.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 27 Oct 2021 04:55:44 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.87,186,1631602800"; d="scan'208";a="597333321" Received: from coresw01.iind.intel.com ([10.106.46.194]) by orsmga004.jf.intel.com with ESMTP; 27 Oct 2021 04:55:39 -0700 From: rashmi.a@intel.com To: michal.simek@xilinx.com, ulf.hansson@linaro.org, linux-mmc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, robh+dt@kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, kishon@ti.com, vkoul@kernel.org, andriy.shevchenko@linux.intel.com, linux-phy@lists.infradead.org Cc: mgross@linux.intel.com, kris.pan@linux.intel.com, furong.zhou@intel.com, mallikarjunappa.sangannavar@intel.com, adrian.hunter@intel.com, mahesh.r.vaidya@intel.com, nandhini.srikandan@intel.com, rashmi.a@intel.com Subject: [RESEND PATCH v2 4/4] phy: intel: Add Thunder Bay eMMC PHY support Date: Wed, 27 Oct 2021 17:25:16 +0530 Message-Id: <20211027115516.4475-5-rashmi.a@intel.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20211027115516.4475-1-rashmi.a@intel.com> References: <20211027115516.4475-1-rashmi.a@intel.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20211027_045545_927516_01673B7E X-CRM114-Status: GOOD ( 28.79 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org From: Rashmi A Add support of eMMC PHY for Intel Thunder Bay SoC, uses the Arasan eMMC phy Signed-off-by: Rashmi A Reviewed-by: Adrian Hunter --- drivers/phy/intel/Kconfig | 10 + drivers/phy/intel/Makefile | 1 + drivers/phy/intel/phy-intel-thunderbay-emmc.c | 511 ++++++++++++++++++ 3 files changed, 522 insertions(+) create mode 100644 drivers/phy/intel/phy-intel-thunderbay-emmc.c diff --git a/drivers/phy/intel/Kconfig b/drivers/phy/intel/Kconfig index ac42bb2fb394..18a3cc5b98c0 100644 --- a/drivers/phy/intel/Kconfig +++ b/drivers/phy/intel/Kconfig @@ -46,3 +46,13 @@ config PHY_INTEL_LGM_EMMC select GENERIC_PHY help Enable this to support the Intel EMMC PHY + +config PHY_INTEL_THUNDERBAY_EMMC + tristate "Intel Thunder Bay eMMC PHY driver" + depends on OF && (ARCH_THUNDERBAY || COMPILE_TEST) + select GENERIC_PHY + help + This option enables support for Intel Thunder Bay SoC eMMC PHY. + + To compile this driver as a module, choose M here: the module + will be called phy-intel-thunderbay-emmc.ko. diff --git a/drivers/phy/intel/Makefile b/drivers/phy/intel/Makefile index 14550981a707..b7321d56b0bb 100644 --- a/drivers/phy/intel/Makefile +++ b/drivers/phy/intel/Makefile @@ -3,3 +3,4 @@ obj-$(CONFIG_PHY_INTEL_KEEMBAY_EMMC) += phy-intel-keembay-emmc.o obj-$(CONFIG_PHY_INTEL_KEEMBAY_USB) += phy-intel-keembay-usb.o obj-$(CONFIG_PHY_INTEL_LGM_COMBO) += phy-intel-lgm-combo.o obj-$(CONFIG_PHY_INTEL_LGM_EMMC) += phy-intel-lgm-emmc.o +obj-$(CONFIG_PHY_INTEL_THUNDERBAY_EMMC) += phy-intel-thunderbay-emmc.o diff --git a/drivers/phy/intel/phy-intel-thunderbay-emmc.c b/drivers/phy/intel/phy-intel-thunderbay-emmc.c new file mode 100644 index 000000000000..2d6ea84492f2 --- /dev/null +++ b/drivers/phy/intel/phy-intel-thunderbay-emmc.c @@ -0,0 +1,511 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Intel ThunderBay eMMC PHY driver + * + * Copyright (C) 2021 Intel Corporation + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* eMMC/SD/SDIO core/phy configuration registers */ +#define CTRL_CFG_0 0x00 +#define CTRL_CFG_1 0x04 +#define CTRL_PRESET_0 0x08 +#define CTRL_PRESET_1 0x0c +#define CTRL_PRESET_2 0x10 +#define CTRL_PRESET_3 0x14 +#define CTRL_PRESET_4 0x18 +#define CTRL_CFG_2 0x1c +#define CTRL_CFG_3 0x20 +#define PHY_CFG_0 0x24 +#define PHY_CFG_1 0x28 +#define PHY_CFG_2 0x2c +#define PHYBIST_CTRL 0x30 +#define SDHC_STAT3 0x34 +#define PHY_STAT 0x38 +#define PHYBIST_STAT_0 0x3c +#define PHYBIST_STAT_1 0x40 +#define EMMC_AXI 0x44 + +/* CTRL_PRESET_3 */ +#define CTRL_PRESET3_MASK GENMASK(31, 0) +#define CTRL_PRESET3_SHIFT 0 + +/* CTRL_CFG_0 bit fields */ +#define SUPPORT_HS_MASK BIT(26) +#define SUPPORT_HS_SHIFT 26 + +#define SUPPORT_8B_MASK BIT(24) +#define SUPPORT_8B_SHIFT 24 + +/* CTRL_CFG_1 bit fields */ +#define SUPPORT_SDR50_MASK BIT(28) +#define SUPPORT_SDR50_SHIFT 28 +#define SLOT_TYPE_MASK GENMASK(27, 26) +#define SLOT_TYPE_OFFSET 26 +#define SUPPORT_64B_MASK BIT(24) +#define SUPPORT_64B_SHIFT 24 +#define SUPPORT_HS400_MASK BIT(2) +#define SUPPORT_HS400_SHIFT 2 +#define SUPPORT_DDR50_MASK BIT(1) +#define SUPPORT_DDR50_SHIFT 1 +#define SUPPORT_SDR104_MASK BIT(0) +#define SUPPORT_SDR104_SHIFT 0 + +/* PHY_CFG_0 bit fields */ +#define SEL_DLY_TXCLK_MASK BIT(29) +#define SEL_DLY_TXCLK_SHIFT 29 +#define SEL_DLY_RXCLK_MASK BIT(28) +#define SEL_DLY_RXCLK_SHIFT 28 + +#define OTAP_DLY_ENA_MASK BIT(27) +#define OTAP_DLY_ENA_SHIFT 27 +#define OTAP_DLY_SEL_MASK GENMASK(26, 23) +#define OTAP_DLY_SEL_SHIFT 23 +#define ITAP_CHG_WIN_MASK BIT(22) +#define ITAP_CHG_WIN_SHIFT 22 +#define ITAP_DLY_ENA_MASK BIT(21) +#define ITAP_DLY_ENA_SHIFT 21 +#define ITAP_DLY_SEL_MASK GENMASK(20, 16) +#define ITAP_DLY_SEL_SHIFT 16 +#define RET_ENB_MASK BIT(15) +#define RET_ENB_SHIFT 15 +#define RET_EN_MASK BIT(14) +#define RET_EN_SHIFT 14 +#define DLL_IFF_MASK GENMASK(13, 11) +#define DLL_IFF_SHIFT 11 +#define DLL_EN_MASK BIT(10) +#define DLL_EN_SHIFT 10 +#define DLL_TRIM_ICP_MASK GENMASK(9, 6) +#define DLL_TRIM_ICP_SHIFT 6 +#define RETRIM_EN_MASK BIT(5) +#define RETRIM_EN_SHIFT 5 +#define RETRIM_MASK BIT(4) +#define RETRIM_SHIFT 4 +#define DR_TY_MASK GENMASK(3, 1) +#define DR_TY_SHIFT 1 +#define PWR_DOWN_MASK BIT(0) +#define PWR_DOWN_SHIFT 0 + +/* PHY_CFG_1 bit fields */ +#define REN_DAT_MASK GENMASK(19, 12) +#define REN_DAT_SHIFT 12 +#define REN_CMD_MASK BIT(11) +#define REN_CMD_SHIFT 11 +#define REN_STRB_MASK BIT(10) +#define REN_STRB_SHIFT 10 +#define PU_STRB_MASK BIT(20) +#define PU_STRB_SHIFT 20 + +/* PHY_CFG_2 bit fields */ +#define CLKBUF_MASK GENMASK(24, 21) +#define CLKBUF_SHIFT 21 +#define SEL_STRB_MASK GENMASK(20, 13) +#define SEL_STRB_SHIFT 13 +#define SEL_FREQ_MASK GENMASK(12, 10) +#define SEL_FREQ_SHIFT 10 + +/* PHY_STAT bit fields */ +#define CAL_DONE BIT(6) +#define DLL_RDY BIT(5) + +#define OTAP_DLY 0x0 +#define ITAP_DLY 0x0 +#define STRB 0x33 + +/* From ACS_eMMC51_16nFFC_RO1100_Userguide_v1p0.pdf p17 */ +#define FREQSEL_200M_170M 0x0 +#define FREQSEL_170M_140M 0x1 +#define FREQSEL_140M_110M 0x2 +#define FREQSEL_110M_80M 0x3 +#define FREQSEL_80M_50M 0x4 +#define FREQSEL_275M_250M 0x5 +#define FREQSEL_250M_225M 0x6 +#define FREQSEL_225M_200M 0x7 + +/* Phy power status */ +#define PHY_UNINITIALIZED 0 +#define PHY_INITIALIZED 1 + +/* + * During init(400KHz) phy_settings will be called with 200MHZ clock + * To avoid incorrectly setting the phy for init(400KHZ) "phy_power_sts" is used. + * When actual clock is set always phy is powered off once and then powered on. + * (sdhci_arasan_set_clock). That feature will be used to identify whether the + * settings are for init phy_power_on or actual clock phy_power_on + * 0 --> init settings + * 1 --> actual settings + */ + +struct thunderbay_emmc_phy { + void __iomem *reg_base; + struct clk *emmcclk; + int phy_power_sts; +}; + +static inline void update_reg(struct thunderbay_emmc_phy *tbh_phy, u32 offset, + u32 mask, u32 shift, u32 val) +{ + u32 tmp; + + tmp = readl(tbh_phy->reg_base + offset); + tmp &= ~mask; + tmp |= val << shift; + writel(tmp, tbh_phy->reg_base + offset); +} + +static int thunderbay_emmc_phy_power(struct phy *phy, bool power_on) +{ + struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy); + unsigned int freqsel = FREQSEL_200M_170M; + unsigned long rate; + static int lock; + u32 val; + int ret; + + /* Disable DLL */ + rate = clk_get_rate(tbh_phy->emmcclk); + switch (rate) { + case 200000000: + /* lock dll only when it is used, i.e only if SEL_DLY_TXCLK/RXCLK are 0 */ + update_reg(tbh_phy, PHY_CFG_0, DLL_EN_MASK, DLL_EN_SHIFT, 0x0); + break; + + /* dll lock not required for other frequencies */ + case 50000000 ... 52000000: + case 400000: + default: + break; + } + + if (!power_on) + return 0; + + rate = clk_get_rate(tbh_phy->emmcclk); + switch (rate) { + case 170000001 ... 200000000: + freqsel = FREQSEL_200M_170M; + break; + + case 140000001 ... 170000000: + freqsel = FREQSEL_170M_140M; + break; + + case 110000001 ... 140000000: + freqsel = FREQSEL_140M_110M; + break; + + case 80000001 ... 110000000: + freqsel = FREQSEL_110M_80M; + break; + + case 50000000 ... 80000000: + freqsel = FREQSEL_80M_50M; + break; + + case 250000001 ... 275000000: + freqsel = FREQSEL_275M_250M; + break; + + case 225000001 ... 250000000: + freqsel = FREQSEL_250M_225M; + break; + + case 200000001 ... 225000000: + freqsel = FREQSEL_225M_200M; + break; + default: + break; + } + /* Clock rate is checked against upper limit. It may fall low during init */ + if (rate > 200000000) + dev_warn(&phy->dev, "Unsupported rate: %lu\n", rate); + + udelay(5); + + if (lock == 0) { + /* PDB will be done only once per boot */ + update_reg(tbh_phy, PHY_CFG_0, PWR_DOWN_MASK, + PWR_DOWN_SHIFT, 0x1); + lock = 1; + /* + * According to the user manual, it asks driver to wait 5us for + * calpad busy trimming. However it is documented that this value is + * PVT(A.K.A. process, voltage and temperature) relevant, so some + * failure cases are found which indicates we should be more tolerant + * to calpad busy trimming. + */ + ret = readl_poll_timeout(tbh_phy->reg_base + PHY_STAT, + val, (val & CAL_DONE), 10, 50); + if (ret) { + dev_err(&phy->dev, "caldone failed, ret=%d\n", ret); + return ret; + } + } + rate = clk_get_rate(tbh_phy->emmcclk); + switch (rate) { + case 200000000: + /* Set frequency of the DLL operation */ + update_reg(tbh_phy, PHY_CFG_2, SEL_FREQ_MASK, SEL_FREQ_SHIFT, freqsel); + + /* Enable DLL */ + update_reg(tbh_phy, PHY_CFG_0, DLL_EN_MASK, DLL_EN_SHIFT, 0x1); + + /* + * After enabling analog DLL circuits docs say that we need 10.2 us if + * our source clock is at 50 MHz and that lock time scales linearly + * with clock speed. If we are powering on the PHY and the card clock + * is super slow (like 100kHz) this could take as long as 5.1 ms as + * per the math: 10.2 us * (50000000 Hz / 100000 Hz) => 5.1 ms + * hopefully we won't be running at 100 kHz, but we should still make + * sure we wait long enough. + * + * NOTE: There appear to be corner cases where the DLL seems to take + * extra long to lock for reasons that aren't understood. In some + * extreme cases we've seen it take up to over 10ms (!). We'll be + * generous and give it 50ms. + */ + ret = readl_poll_timeout(tbh_phy->reg_base + PHY_STAT, + val, (val & DLL_RDY), 10, 50 * USEC_PER_MSEC); + if (ret) { + dev_err(&phy->dev, "dllrdy failed, ret=%d\n", ret); + return ret; + } + break; + + default: + break; + } + return 0; +} + +static int thunderbay_emmc_phy_init(struct phy *phy) +{ + struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy); + + tbh_phy->emmcclk = clk_get(&phy->dev, "emmcclk"); + + return PTR_ERR_OR_ZERO(tbh_phy->emmcclk); +} + +static int thunderbay_emmc_phy_exit(struct phy *phy) +{ + struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy); + + clk_put(tbh_phy->emmcclk); + + return 0; +} + +static int thunderbay_emmc_phy_power_on(struct phy *phy) +{ + struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy); + unsigned long rate; + + /* Overwrite capability bits configurable in bootloader */ + update_reg(tbh_phy, CTRL_CFG_0, + SUPPORT_HS_MASK, SUPPORT_HS_SHIFT, 0x1); + update_reg(tbh_phy, CTRL_CFG_0, + SUPPORT_8B_MASK, SUPPORT_8B_SHIFT, 0x1); + update_reg(tbh_phy, CTRL_CFG_1, + SUPPORT_SDR50_MASK, SUPPORT_SDR50_SHIFT, 0x1); + update_reg(tbh_phy, CTRL_CFG_1, + SUPPORT_DDR50_MASK, SUPPORT_DDR50_SHIFT, 0x1); + update_reg(tbh_phy, CTRL_CFG_1, + SUPPORT_SDR104_MASK, SUPPORT_SDR104_SHIFT, 0x1); + update_reg(tbh_phy, CTRL_CFG_1, + SUPPORT_HS400_MASK, SUPPORT_HS400_SHIFT, 0x1); + update_reg(tbh_phy, CTRL_CFG_1, + SUPPORT_64B_MASK, SUPPORT_64B_SHIFT, 0x1); + + if (tbh_phy->phy_power_sts == PHY_UNINITIALIZED) { + /* Indicates initialization, settings for init, same as 400KHZ setting */ + update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK, SEL_DLY_TXCLK_SHIFT, 0x1); + update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK, SEL_DLY_RXCLK_SHIFT, 0x1); + update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK, ITAP_DLY_ENA_SHIFT, 0x0); + update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK, ITAP_DLY_SEL_SHIFT, 0x0); + update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK, OTAP_DLY_ENA_SHIFT, 0x0); + update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK, OTAP_DLY_SEL_SHIFT, 0); + update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK, DLL_TRIM_ICP_SHIFT, 0); + update_reg(tbh_phy, PHY_CFG_0, DR_TY_MASK, DR_TY_SHIFT, 0x1); + + } else if (tbh_phy->phy_power_sts == PHY_INITIALIZED) { + /* Indicates actual clock setting */ + rate = clk_get_rate(tbh_phy->emmcclk); + switch (rate) { + case 200000000: + update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK, + SEL_DLY_TXCLK_SHIFT, 0x0); + update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK, + SEL_DLY_RXCLK_SHIFT, 0x0); + update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK, + ITAP_DLY_ENA_SHIFT, 0x0); + update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK, + ITAP_DLY_SEL_SHIFT, 0x0); + update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK, + OTAP_DLY_ENA_SHIFT, 0x1); + update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK, + OTAP_DLY_SEL_SHIFT, 2); + update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK, + DLL_TRIM_ICP_SHIFT, 0x8); + update_reg(tbh_phy, PHY_CFG_0, DR_TY_MASK, + DR_TY_SHIFT, 0x1); + /* For HS400 only */ + update_reg(tbh_phy, PHY_CFG_2, SEL_STRB_MASK, + SEL_STRB_SHIFT, STRB); + break; + + case 50000000 ... 52000000: + /* For both HS and DDR52 this setting works */ + update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK, + SEL_DLY_TXCLK_SHIFT, 0x1); + update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK, + SEL_DLY_RXCLK_SHIFT, 0x1); + update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK, + ITAP_DLY_ENA_SHIFT, 0x0); + update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK, + ITAP_DLY_SEL_SHIFT, 0x0); + update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK, + OTAP_DLY_ENA_SHIFT, 0x1); + update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK, + OTAP_DLY_SEL_SHIFT, 4); + update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK, + DLL_TRIM_ICP_SHIFT, 0x8); + update_reg(tbh_phy, PHY_CFG_0, + DR_TY_MASK, DR_TY_SHIFT, 0x1); + break; + + case 400000: + update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK, + SEL_DLY_TXCLK_SHIFT, 0x1); + update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK, + SEL_DLY_RXCLK_SHIFT, 0x1); + update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK, + ITAP_DLY_ENA_SHIFT, 0x0); + update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK, + ITAP_DLY_SEL_SHIFT, 0x0); + update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK, + OTAP_DLY_ENA_SHIFT, 0x0); + update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK, + OTAP_DLY_SEL_SHIFT, 0); + update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK, + DLL_TRIM_ICP_SHIFT, 0); + update_reg(tbh_phy, PHY_CFG_0, DR_TY_MASK, DR_TY_SHIFT, 0x1); + break; + + default: + update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK, + SEL_DLY_TXCLK_SHIFT, 0x1); + update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK, + SEL_DLY_RXCLK_SHIFT, 0x1); + update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK, + ITAP_DLY_ENA_SHIFT, 0x0); + update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK, + ITAP_DLY_SEL_SHIFT, 0x0); + update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK, + OTAP_DLY_ENA_SHIFT, 0x1); + update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK, + OTAP_DLY_SEL_SHIFT, 2); + update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK, + DLL_TRIM_ICP_SHIFT, 0x8); + update_reg(tbh_phy, PHY_CFG_0, DR_TY_MASK, + DR_TY_SHIFT, 0x1); + break; + } + /* Reset, init seq called without phy_power_off, this indicates init seq */ + tbh_phy->phy_power_sts = PHY_UNINITIALIZED; + } + + update_reg(tbh_phy, PHY_CFG_0, RETRIM_EN_MASK, RETRIM_EN_SHIFT, 0x1); + update_reg(tbh_phy, PHY_CFG_0, RETRIM_MASK, RETRIM_SHIFT, 0x0); + + return thunderbay_emmc_phy_power(phy, 1); +} + +static int thunderbay_emmc_phy_power_off(struct phy *phy) +{ + struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy); + + tbh_phy->phy_power_sts = PHY_INITIALIZED; + + return thunderbay_emmc_phy_power(phy, 0); +} + +static const struct phy_ops thunderbay_emmc_phy_ops = { + .init = thunderbay_emmc_phy_init, + .exit = thunderbay_emmc_phy_exit, + .power_on = thunderbay_emmc_phy_power_on, + .power_off = thunderbay_emmc_phy_power_off, + .owner = THIS_MODULE, +}; + +static const struct of_device_id thunderbay_emmc_phy_of_match[] = { + { .compatible = "intel,thunderbay-emmc-phy", + (void *)&thunderbay_emmc_phy_ops }, + {} +}; +MODULE_DEVICE_TABLE(of, thunderbay_emmc_phy_of_match); + +static int thunderbay_emmc_phy_probe(struct platform_device *pdev) +{ + struct thunderbay_emmc_phy *tbh_phy; + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + const struct of_device_id *id; + struct phy *generic_phy; + struct resource *res; + + if (!dev->of_node) + return -ENODEV; + + tbh_phy = devm_kzalloc(dev, sizeof(*tbh_phy), GFP_KERNEL); + if (!tbh_phy) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + tbh_phy->reg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(tbh_phy->reg_base)) { + dev_err(&pdev->dev, "region map failed\n"); + return PTR_ERR(tbh_phy->reg_base); + } + + tbh_phy->phy_power_sts = PHY_UNINITIALIZED; + id = of_match_node(thunderbay_emmc_phy_of_match, pdev->dev.of_node); + if (!id) { + dev_err(dev, "failed to get match_node\n"); + return -EINVAL; + } + + generic_phy = devm_phy_create(dev, dev->of_node, id->data); + if (IS_ERR(generic_phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(generic_phy); + } + + phy_set_drvdata(generic_phy, tbh_phy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver thunderbay_emmc_phy_driver = { + .probe = thunderbay_emmc_phy_probe, + .driver = { + .name = "thunderbay-emmc-phy", + .of_match_table = thunderbay_emmc_phy_of_match, + }, +}; +module_platform_driver(thunderbay_emmc_phy_driver); + +MODULE_AUTHOR("Nandhini S "); +MODULE_AUTHOR("Rashmi A "); +MODULE_DESCRIPTION("Intel Thunder Bay eMMC PHY driver"); +MODULE_LICENSE("GPL v2");