diff mbox series

[v3,6/8] phy: phy-rockchip-inno-usb2: add rk3568 support

Message ID 20211215210252.120923-7-pgwipeout@gmail.com
State Accepted
Headers show
Series phy-rockchip-inno-usb2: support rk356x usb2phy | expand

Commit Message

Peter Geis Dec. 15, 2021, 9:02 p.m. UTC 
The rk3568 usb2phy is a standalone device with a single muxed interrupt.
Add support for the registers to the usb2phy driver.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>

---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 65 +++++++++++++++++++
 1 file changed, 65 insertions(+)
diff mbox series

Patch

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 285958fdab38..bdc5a861891c 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1093,6 +1093,7 @@  static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
 	if (ret) {
 		dev_err(rphy->dev, "failed to init irq for host port\n");
 		goto out;
+	}
 
 	if (!IS_ERR(rphy->edev)) {
 		rport->event_nb.notifier_call = rockchip_otg_event;
@@ -1504,6 +1505,69 @@  static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
 	{ /* sentinel */ }
 };
 
+static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
+	{
+		.reg = 0xfe8a0000,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x0008, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0000, 8, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x0080, 2, 2, 0, 1 },
+				.bvalid_det_st	= { 0x0084, 2, 2, 0, 1 },
+				.bvalid_det_clr = { 0x0088, 2, 2, 0, 1 },
+				.utmi_avalid	= { 0x00c0, 10, 10, 0, 1 },
+				.utmi_bvalid	= { 0x00c0, 9, 9, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				/* Select suspend control from controller */
+				.phy_sus	= { 0x0004, 8, 0, 0x1d2, 0x1d2 },
+				.ls_det_en	= { 0x0080, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x0084, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x0088, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x00c0, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x00c0, 19, 19, 0, 1 }
+			}
+		},
+		.chg_det = {
+			.opmode		= { 0x0000, 3, 0, 5, 1 },
+			.cp_det		= { 0x00c0, 24, 24, 0, 1 },
+			.dcp_det	= { 0x00c0, 23, 23, 0, 1 },
+			.dp_det		= { 0x00c0, 25, 25, 0, 1 },
+			.idm_sink_en	= { 0x0008, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0x0008, 7, 7, 0, 1 },
+			.idp_src_en	= { 0x0008, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0x0008, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0x0008, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0x0008, 11, 11, 0, 1 },
+		},
+	},
+	{
+		.reg = 0xfe8b0000,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x0008, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0000, 8, 0, 0x1d2, 0x1d1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x00c0, 5, 4, 0, 1 },
+				.utmi_hstdet	= { 0x00c0, 7, 7, 0, 1 }
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0004, 8, 0, 0x1d2, 0x1d1 },
+				.ls_det_en	= { 0x0080, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x0084, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x0088, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x00c0, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x00c0, 19, 19, 0, 1 }
+			}
+		},
+	},
+	{ /* sentinel */ }
+};
+
 static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
 	{
 		.reg = 0x100,
@@ -1553,6 +1617,7 @@  static const struct of_device_id rockchip_usb2phy_dt_match[] = {
 	{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
 	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
 	{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
+	{ .compatible = "rockchip,rk3568-usb2phy", .data = &rk3568_phy_cfgs },
 	{ .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs },
 	{}
 };