From patchwork Sat Feb 5 18:53:29 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Paul Kocialkowski X-Patchwork-Id: 12736237 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 64E51C433FE for ; Sat, 5 Feb 2022 18:57:51 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=vyFHza37PmKeO6LCOwYZwDPOfoMWXeI3s764JRAdXzg=; b=OlnsCP1alPRljs Gi9xZcS9VHDiW+NR8ghXDJKwirD2WA0wU2QHkjKS+fOh3mKqg4fc9wInPG63NtJe3RT0ohBi/6U5G j3DQG/5X9MAdnwYXjyt9uY95ntf0ZAtKc+MiWDgf4FAvTbtkDHhUkN3YbRqKL8CMzd8ST+6dRMS5w mgeS6SaF/u2LujNzpQ4T/Xfo8HwqwiugzWmYf5YDFjnSIzVA0FMT+cr2b1XVmsXAWuN8GITgBNEoS MqxVZ5KYcrSCiqM6EsTOkoTicmHju/m37LEswWVrsu4A6Ezfc0W4YEgAWW2p2+fVXWmInFm8WZT2l CHvuDaR/vmI8+QN8EnMA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1nGQFq-00718S-JV; Sat, 05 Feb 2022 18:57:50 +0000 Received: from relay10.mail.gandi.net ([2001:4b98:dc4:8::230]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1nGQCy-006zHs-8D; Sat, 05 Feb 2022 18:54:54 +0000 Received: (Authenticated sender: paul.kocialkowski@bootlin.com) by mail.gandi.net (Postfix) with ESMTPSA id E84E324000A; Sat, 5 Feb 2022 18:54:48 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1644087290; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=29+cdXhI7L+2Gxc8tUO/DTtQnEvp3UwBUI/8lM2KtFc=; b=SX+D04eBXLLpgWObpYKueWwe0B+Xy4hJcCDJP+JF14LGOpZvh7uLA+XUvjKGB72NDJyt6R 7yWWL2ol3So3g52bmaRFY6EhwGrS1AqaQzIKXkKDqKEerDrSgpDTlVoDYCA7IQozkxlDri E88zpaPD6vUSnAkDrWqyYLtPw7yZ4g7D9zPPpgCkLmotUnKJNaD6w9ydMyQhZb9/BCxNjN kcP2es4/UoXdErLs+pjU9OjCUxdze9PyOFSVhhIKyM6PHU+kihzVxmE+DLIZDhOAegWiuX e4NqadwyGN7uXkj6oC54J8MdSZc87fhGVCzJaZx06fQxDPAtt6xHGzne8RcExw== From: Paul Kocialkowski To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org, linux-clk@vger.kernel.org, linux-staging@lists.linux.dev Cc: Yong Deng , Mauro Carvalho Chehab , Rob Herring , Maxime Ripard , Sakari Ailus , Hans Verkuil , Chen-Yu Tsai , Jernej Skrabec , Paul Kocialkowski , Greg Kroah-Hartman , Helen Koike , Laurent Pinchart , Thomas Petazzoni Subject: [PATCH v2 06/66] phy: allwinner: phy-sun6i-mipi-dphy: Support D-PHY Rx mode for MIPI CSI-2 Date: Sat, 5 Feb 2022 19:53:29 +0100 Message-Id: <20220205185429.2278860-7-paul.kocialkowski@bootlin.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20220205185429.2278860-1-paul.kocialkowski@bootlin.com> References: <20220205185429.2278860-1-paul.kocialkowski@bootlin.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220205_105452_645467_0D3D1814 X-CRM114-Status: GOOD ( 19.71 ) X-BeenThere: linux-phy@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux Phy Mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-phy" Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org The Allwinner A31 D-PHY supports both Rx and Tx modes. While the latter is already supported and used for MIPI DSI this adds support for the former, to be used with MIPI CSI-2. This implementation is inspired by Allwinner's V3s Linux SDK implementation, which was used as a documentation base. It uses the direction dt property to distinguish between tx and rx directions. Signed-off-by: Paul Kocialkowski --- drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 166 +++++++++++++++++++- 1 file changed, 162 insertions(+), 4 deletions(-) diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c index f0bc87d654d4..3900f1650851 100644 --- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c +++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c @@ -24,6 +24,14 @@ #define SUN6I_DPHY_TX_CTL_REG 0x04 #define SUN6I_DPHY_TX_CTL_HS_TX_CLK_CONT BIT(28) +#define SUN6I_DPHY_RX_CTL_REG 0x08 +#define SUN6I_DPHY_RX_CTL_EN_DBC BIT(31) +#define SUN6I_DPHY_RX_CTL_RX_CLK_FORCE BIT(24) +#define SUN6I_DPHY_RX_CTL_RX_D3_FORCE BIT(23) +#define SUN6I_DPHY_RX_CTL_RX_D2_FORCE BIT(22) +#define SUN6I_DPHY_RX_CTL_RX_D1_FORCE BIT(21) +#define SUN6I_DPHY_RX_CTL_RX_D0_FORCE BIT(20) + #define SUN6I_DPHY_TX_TIME0_REG 0x10 #define SUN6I_DPHY_TX_TIME0_HS_TRAIL(n) (((n) & 0xff) << 24) #define SUN6I_DPHY_TX_TIME0_HS_PREPARE(n) (((n) & 0xff) << 16) @@ -44,12 +52,29 @@ #define SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(n) (((n) & 0xff) << 8) #define SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(n) ((n) & 0xff) +#define SUN6I_DPHY_RX_TIME0_REG 0x30 +#define SUN6I_DPHY_RX_TIME0_HS_RX_SYNC(n) (((n) & 0xff) << 24) +#define SUN6I_DPHY_RX_TIME0_HS_RX_CLK_MISS(n) (((n) & 0xff) << 16) +#define SUN6I_DPHY_RX_TIME0_LP_RX(n) (((n) & 0xff) << 8) + +#define SUN6I_DPHY_RX_TIME1_REG 0x34 +#define SUN6I_DPHY_RX_TIME1_RX_DLY(n) (((n) & 0xfff) << 20) +#define SUN6I_DPHY_RX_TIME1_LP_RX_ULPS_WP(n) ((n) & 0xfffff) + +#define SUN6I_DPHY_RX_TIME2_REG 0x38 +#define SUN6I_DPHY_RX_TIME2_HS_RX_ANA1(n) (((n) & 0xff) << 8) +#define SUN6I_DPHY_RX_TIME2_HS_RX_ANA0(n) ((n) & 0xff) + +#define SUN6I_DPHY_RX_TIME3_REG 0x40 +#define SUN6I_DPHY_RX_TIME3_LPRST_DLY(n) (((n) & 0xffff) << 16) + #define SUN6I_DPHY_ANA0_REG 0x4c #define SUN6I_DPHY_ANA0_REG_PWS BIT(31) #define SUN6I_DPHY_ANA0_REG_DMPC BIT(28) #define SUN6I_DPHY_ANA0_REG_DMPD(n) (((n) & 0xf) << 24) #define SUN6I_DPHY_ANA0_REG_SLV(n) (((n) & 7) << 12) #define SUN6I_DPHY_ANA0_REG_DEN(n) (((n) & 0xf) << 8) +#define SUN6I_DPHY_ANA0_REG_SFB(n) (((n) & 3) << 2) #define SUN6I_DPHY_ANA1_REG 0x50 #define SUN6I_DPHY_ANA1_REG_VTTMODE BIT(31) @@ -84,6 +109,11 @@ #define SUN6I_DPHY_DBG5_REG 0xf4 +enum sun6i_dphy_direction { + SUN6I_DPHY_DIRECTION_TX, + SUN6I_DPHY_DIRECTION_RX, +}; + struct sun6i_dphy { struct clk *bus_clk; struct clk *mod_clk; @@ -92,6 +122,8 @@ struct sun6i_dphy { struct phy *phy; struct phy_configure_opts_mipi_dphy config; + + enum sun6i_dphy_direction direction; }; static int sun6i_dphy_init(struct phy *phy) @@ -119,9 +151,8 @@ static int sun6i_dphy_configure(struct phy *phy, union phy_configure_opts *opts) return 0; } -static int sun6i_dphy_power_on(struct phy *phy) +static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy) { - struct sun6i_dphy *dphy = phy_get_drvdata(phy); u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0); regmap_write(dphy->regs, SUN6I_DPHY_TX_CTL_REG, @@ -211,12 +242,129 @@ static int sun6i_dphy_power_on(struct phy *phy) return 0; } +static int sun6i_dphy_rx_power_on(struct sun6i_dphy *dphy) +{ + /* Physical clock rate is actually half of symbol rate with DDR. */ + unsigned long mipi_symbol_rate = dphy->config.hs_clk_rate; + unsigned long dphy_clk_rate; + unsigned int rx_dly; + unsigned int lprst_dly; + u32 value; + + dphy_clk_rate = clk_get_rate(dphy->mod_clk); + if (!dphy_clk_rate) + return -EINVAL; + + /* Hardcoded timing parameters from the Allwinner BSP. */ + regmap_write(dphy->regs, SUN6I_DPHY_RX_TIME0_REG, + SUN6I_DPHY_RX_TIME0_HS_RX_SYNC(255) | + SUN6I_DPHY_RX_TIME0_HS_RX_CLK_MISS(255) | + SUN6I_DPHY_RX_TIME0_LP_RX(255)); + + /* + * Formula from the Allwinner BSP, with hardcoded coefficients + * (probably internal divider/multiplier). + */ + rx_dly = 8 * (unsigned int)(dphy_clk_rate / (mipi_symbol_rate / 8)); + + /* + * The Allwinner BSP has an alternative formula for LP_RX_ULPS_WP: + * lp_ulps_wp_cnt = lp_ulps_wp_ms * lp_clk / 1000 + * but does not use it and hardcodes 255 instead. + */ + regmap_write(dphy->regs, SUN6I_DPHY_RX_TIME1_REG, + SUN6I_DPHY_RX_TIME1_RX_DLY(rx_dly) | + SUN6I_DPHY_RX_TIME1_LP_RX_ULPS_WP(255)); + + /* HS_RX_ANA0 value is hardcoded in the Allwinner BSP. */ + regmap_write(dphy->regs, SUN6I_DPHY_RX_TIME2_REG, + SUN6I_DPHY_RX_TIME2_HS_RX_ANA0(4)); + + /* + * Formula from the Allwinner BSP, with hardcoded coefficients + * (probably internal divider/multiplier). + */ + lprst_dly = 4 * (unsigned int)(dphy_clk_rate / (mipi_symbol_rate / 2)); + + regmap_write(dphy->regs, SUN6I_DPHY_RX_TIME3_REG, + SUN6I_DPHY_RX_TIME3_LPRST_DLY(lprst_dly)); + + /* Analog parameters are hardcoded in the Allwinner BSP. */ + regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG, + SUN6I_DPHY_ANA0_REG_PWS | + SUN6I_DPHY_ANA0_REG_SLV(7) | + SUN6I_DPHY_ANA0_REG_SFB(2)); + + regmap_write(dphy->regs, SUN6I_DPHY_ANA1_REG, + SUN6I_DPHY_ANA1_REG_SVTT(4)); + + regmap_write(dphy->regs, SUN6I_DPHY_ANA4_REG, + SUN6I_DPHY_ANA4_REG_DMPLVC | + SUN6I_DPHY_ANA4_REG_DMPLVD(1)); + + regmap_write(dphy->regs, SUN6I_DPHY_ANA2_REG, + SUN6I_DPHY_ANA2_REG_ENIB); + + regmap_write(dphy->regs, SUN6I_DPHY_ANA3_REG, + SUN6I_DPHY_ANA3_EN_LDOR | + SUN6I_DPHY_ANA3_EN_LDOC | + SUN6I_DPHY_ANA3_EN_LDOD); + + /* + * Delay comes from the Allwinner BSP, likely for internal regulator + * ramp-up. + */ + udelay(3); + + value = SUN6I_DPHY_RX_CTL_EN_DBC | SUN6I_DPHY_RX_CTL_RX_CLK_FORCE; + + /* + * Rx data lane force-enable bits are used as regular RX enable by the + * Allwinner BSP. + */ + if (dphy->config.lanes >= 1) + value |= SUN6I_DPHY_RX_CTL_RX_D0_FORCE; + if (dphy->config.lanes >= 2) + value |= SUN6I_DPHY_RX_CTL_RX_D1_FORCE; + if (dphy->config.lanes >= 3) + value |= SUN6I_DPHY_RX_CTL_RX_D2_FORCE; + if (dphy->config.lanes == 4) + value |= SUN6I_DPHY_RX_CTL_RX_D3_FORCE; + + regmap_write(dphy->regs, SUN6I_DPHY_RX_CTL_REG, value); + + regmap_write(dphy->regs, SUN6I_DPHY_GCTL_REG, + SUN6I_DPHY_GCTL_LANE_NUM(dphy->config.lanes) | + SUN6I_DPHY_GCTL_EN); + + return 0; +} + +static int sun6i_dphy_power_on(struct phy *phy) +{ + struct sun6i_dphy *dphy = phy_get_drvdata(phy); + + switch (dphy->direction) { + case SUN6I_DPHY_DIRECTION_TX: + return sun6i_dphy_tx_power_on(dphy); + case SUN6I_DPHY_DIRECTION_RX: + return sun6i_dphy_rx_power_on(dphy); + default: + return -EINVAL; + } +} + static int sun6i_dphy_power_off(struct phy *phy) { struct sun6i_dphy *dphy = phy_get_drvdata(phy); - regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA1_REG, - SUN6I_DPHY_ANA1_REG_VTTMODE, 0); + regmap_write(dphy->regs, SUN6I_DPHY_GCTL_REG, 0); + + regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG, 0); + regmap_write(dphy->regs, SUN6I_DPHY_ANA1_REG, 0); + regmap_write(dphy->regs, SUN6I_DPHY_ANA2_REG, 0); + regmap_write(dphy->regs, SUN6I_DPHY_ANA3_REG, 0); + regmap_write(dphy->regs, SUN6I_DPHY_ANA4_REG, 0); return 0; } @@ -253,7 +401,9 @@ static int sun6i_dphy_probe(struct platform_device *pdev) { struct phy_provider *phy_provider; struct sun6i_dphy *dphy; + const char *direction; void __iomem *regs; + int ret; dphy = devm_kzalloc(&pdev->dev, sizeof(*dphy), GFP_KERNEL); if (!dphy) @@ -290,6 +440,14 @@ static int sun6i_dphy_probe(struct platform_device *pdev) return PTR_ERR(dphy->phy); } + dphy->direction = SUN6I_DPHY_DIRECTION_TX; + + ret = of_property_read_string(pdev->dev.of_node, "allwinner,direction", + &direction); + + if (!ret && !strncmp(direction, "rx", 2)) + dphy->direction = SUN6I_DPHY_DIRECTION_RX; + phy_set_drvdata(dphy->phy, dphy); phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);