@@ -126,6 +126,14 @@ static const struct property_entry dwc3_pci_intel_byt_properties[] = {
{}
};
+static const struct property_entry dwc3_pci_intel_phy_charger_detect_properties[] = {
+ PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
+ PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
+ PROPERTY_ENTRY_BOOL("linux,phy_charger_detect"),
+ PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
+ {}
+};
+
static const struct property_entry dwc3_pci_mrfld_properties[] = {
PROPERTY_ENTRY_STRING("dr_mode", "otg"),
PROPERTY_ENTRY_STRING("linux,extcon-name", "mrfld_bcove_pwrsrc"),
@@ -172,6 +180,10 @@ static const struct software_node dwc3_pci_intel_byt_swnode = {
.properties = dwc3_pci_intel_byt_properties,
};
+static const struct software_node dwc3_pci_intel_phy_charger_detect_swnode = {
+ .properties = dwc3_pci_intel_phy_charger_detect_properties,
+};
+
static const struct software_node dwc3_pci_intel_mrfld_swnode = {
.properties = dwc3_pci_mrfld_properties,
};
@@ -239,6 +251,18 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc,
gpiod_put(gpio);
usleep_range(10000, 11000);
}
+
+ /*
+ * Some Android tablets with a Crystal Cove PMIC
+ * (INT33FD), rely on the TUSB1211 phy for charger
+ * detection. These can be identified by them _not_
+ * using the standard ACPI battery and ac drivers.
+ */
+ if (acpi_dev_present("INT33FD", "1", 2) &&
+ acpi_quirk_skip_acpi_ac_and_battery()) {
+ dev_info(&pdev->dev, "Using TUSB1211 phy for charger detection\n");
+ swnode = &dwc3_pci_intel_phy_charger_detect_swnode;
+ }
}
}
Some Android x86 tablets with a Bay Trail (BYT) SoC and a Crystal Cove PMIC, which does not support charger-detection, rely on the TUSB1211 phy for charger-detection. Windows tablets with the same SoC + PMIC often use an extra chip for charger-detection like the FSA831A. But since on Android tablets the designers already need to add a TUSB1211 phy to support device/gadget mode the phy is used to do charger-detection instead. These Android x86 tablets can be identified by the unique combination of a Bay Trail SoC (already checked for by PCI-ids) + a Crystal Cove PMIC + not using the standard ACPI battery and ac drivers. Where as on Windows tablets the standard ACPI battery and ac drivers will be used on BYT boards with a Crystal Cove PMIC. Set a special kernel-internal (so not part of the dt-bindings) "linux,phy_charger_detect" property on these boards, which tells the tusb1210 driver to enable charger-detection. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/usb/dwc3/dwc3-pci.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)