diff mbox series

[v2,3/3] riscv: dts: starfive: Add dphy rx node

Message ID 20230223015952.201841-4-changhuang.liang@starfivetech.com
State Superseded
Headers show
Series Add JH7110 MIPI DPHY RX support | expand

Commit Message

Changhuang Liang Feb. 23, 2023, 1:59 a.m. UTC 
Add dphy rx node for the Starfive JH7110 SoC. It is used to transfer CSI
camera data.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 697ab59191a1..074423d17786 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -563,6 +563,19 @@  ispcrg: clock-controller@19810000 {
 			power-domains = <&pwrc JH7110_PD_ISP>;
 		};
 
+		csi_phy: phy@19820000 {
+			compatible = "starfive,jh7110-dphy-rx";
+			reg = <0x0 0x19820000 0x0 0x10000>;
+			clocks = <&ispcrg JH7110_ISPCLK_M31DPHY_CFGCLK_IN>,
+				 <&ispcrg JH7110_ISPCLK_M31DPHY_REFCLK_IN>,
+				 <&ispcrg JH7110_ISPCLK_M31DPHY_TXCLKESC_LAN0>;
+			clock-names = "cfg", "ref", "tx";
+			resets = <&ispcrg JH7110_ISPRST_M31DPHY_HW>,
+				 <&ispcrg JH7110_ISPRST_M31DPHY_B09_ALWAYS_ON>;
+			starfive,aon-syscon = <&aon_syscon 0x00>;
+			#phy-cells = <0>;
+		};
+
 		voutcrg: clock-controller@295C0000 {
 			compatible = "starfive,jh7110-voutcrg";
 			reg = <0x0 0x295C0000 0x0 0x10000>;