diff mbox series

[40/41] ARM: dts: qcom-sdx65: switch USB QMP PHY to new style of bindings

Message ID 20230324022514.1800382-41-dmitry.baryshkov@linaro.org
State Changes Requested
Headers show
Series phy: qcom-qmp: convert to newer style of bindings | expand

Commit Message

Dmitry Baryshkov March 24, 2023, 2:25 a.m. UTC 
Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm/boot/dts/qcom-sdx65.dtsi | 29 +++++++++++------------------
 1 file changed, 11 insertions(+), 18 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 192f9f94bc8b..87354317b9df 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -231,31 +231,24 @@  usb_hsphy: phy@ff4000 {
 
 		usb_qmpphy: phy@ff6000 {
 			compatible = "qcom,sdx65-qmp-usb3-uni-phy";
-			reg = <0x00ff6000 0x1c8>;
+			reg = <0x00ff6000 0x2000>;
 			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_PRIM_CLKREF_EN>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_PRIM_CLKREF_EN>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
 				 <&gcc GCC_USB3_PHY_BCR>;
 			reset-names = "phy", "common";
-
-			usb_ssphy: phy@ff6200 {
-				reg = <0x00ff6e00 0x160>,
-				      <0x00ff7000 0x1ec>,
-				      <0x00ff6200 0x1e00>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
 		};
 
 		system_noc: interconnect@1620000 {
@@ -392,7 +385,7 @@  usb_dwc3: usb@a600000 {
 				iommus = <&apps_smmu 0x1a0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};