| Message ID | 20230420110052.3182-4-minda.chen@starfivetech.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add JH7110 USB and USB PHY driver support | expand |
Hi Minda, On 20/04/2023 14:00, Minda Chen wrote: > Add Starfive JH7110 SoC USB 2.0 PHY driver support. > USB 2.0 PHY default connect to Cadence USB controller. > > Signed-off-by: Minda Chen <minda.chen@starfivetech.com> > --- > MAINTAINERS | 6 + > drivers/phy/starfive/Kconfig | 11 ++ > drivers/phy/starfive/Makefile | 1 + > drivers/phy/starfive/phy-jh7110-usb.c | 162 ++++++++++++++++++++++++++ > 4 files changed, 180 insertions(+) > create mode 100644 drivers/phy/starfive/phy-jh7110-usb.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 1aef5ba46d71..c09ea66dcd5a 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -19968,6 +19968,12 @@ M: William Qiu <william.qiu@starfivetech.com> > S: Supported > F: Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml > > +STARFIVE JH71X0 USB PHY DRIVER > +M: Minda Chen <minda.chen@starfivetech.com> > +S: Supported > +F: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml > +F: drivers/phy/starfive/phy-jh7110-usb.c > + > STATIC BRANCH/CALL > M: Peter Zijlstra <peterz@infradead.org> > M: Josh Poimboeuf <jpoimboe@kernel.org> > diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig > index f989b8ff8bcb..2c013c390dee 100644 > --- a/drivers/phy/starfive/Kconfig > +++ b/drivers/phy/starfive/Kconfig > @@ -11,3 +11,14 @@ config PHY_STARFIVE_DPHY_RX > Choose this option if you have a StarFive D-PHY in your > system. If M is selected, the module will be called > phy-starfive-dphy-rx. > + > +config PHY_STARFIVE_JH7110_USB > + tristate "Starfive JH7110 USB 2.0 PHY support" > + depends on USB_SUPPORT > + select GENERIC_PHY > + select USB_PHY > + help > + Enable this to support the StarFive USB 2.0 PHY, > + used with the Cadence USB controller. > + If M is selected, the module will be called > + phy-jh7110-usb.ko. > diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile > index 7ec576cb30ae..176443852f4d 100644 > --- a/drivers/phy/starfive/Makefile > +++ b/drivers/phy/starfive/Makefile > @@ -1,2 +1,3 @@ > # SPDX-License-Identifier: GPL-2.0 > obj-$(CONFIG_PHY_STARFIVE_DPHY_RX) += phy-starfive-dphy-rx.o > +obj-$(CONFIG_PHY_STARFIVE_JH7110_USB) += phy-jh7110-usb.o > diff --git a/drivers/phy/starfive/phy-jh7110-usb.c b/drivers/phy/starfive/phy-jh7110-usb.c > new file mode 100644 > index 000000000000..4a12df0692cd > --- /dev/null > +++ b/drivers/phy/starfive/phy-jh7110-usb.c > @@ -0,0 +1,162 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * StarFive JH7110 USB 2.0 PHY driver > + * > + * Copyright (C) 2023 StarFive Technology Co., Ltd. > + * Author: Minda Chen <minda.chen@starfivetech.com> > + */ > + > +#include <linux/bits.h> > +#include <linux/clk.h> > +#include <linux/err.h> > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/phy/phy.h> > +#include <linux/platform_device.h> > +#include <linux/usb/of.h> > + > +#define USB_125M_CLK_RATE 125000000 > +#define USB_LS_KEEPALIVE_OFF 0x4 > +#define USB_LS_KEEPALIVE_ENABLE BIT(4) > + > +struct jh7110_usb2_phy { > + struct phy *phy; > + void __iomem *regs; > + struct clk *usb_125m_clk; > + struct clk *app_125m; > + enum phy_mode mode; > +}; > + > +static void jh7110_usb2_mode_set(struct jh7110_usb2_phy *phy) > +{ > + unsigned int val; > + > + if (phy->mode != PHY_MODE_USB_HOST) { > + /* Enable the LS speed keep-alive signal */ > + val = readl(phy->regs + USB_LS_KEEPALIVE_OFF); > + val |= USB_LS_KEEPALIVE_ENABLE; > + writel(val, phy->regs + USB_LS_KEEPALIVE_OFF); > + } > +} > + > +static int jh7110_usb2_phy_set_mode(struct phy *_phy, > + enum phy_mode mode, int submode) > +{ > + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy); > + > + switch (mode) { > + case PHY_MODE_USB_HOST: > + case PHY_MODE_USB_DEVICE: > + case PHY_MODE_USB_OTG: > + break; > + default: > + return -EINVAL; > + } > + > + if (mode != phy->mode) { > + dev_info(&_phy->dev, "Changing phy to %d\n", mode); dev_dbg() please? > + phy->mode = mode; > + jh7110_usb2_mode_set(phy); > + } > + > + return 0; > +} > + > +static int jh7110_usb2_phy_init(struct phy *_phy) > +{ > + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy); > + int ret; > + > + ret = clk_set_rate(phy->usb_125m_clk, USB_125M_CLK_RATE); > + if (ret) > + return ret; > + > + ret = clk_prepare_enable(phy->app_125m); > + if (ret) > + return ret; > + > + return 0; > +} > + > +static int jh7110_usb2_phy_exit(struct phy *_phy) > +{ > + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy); > + > + clk_disable_unprepare(phy->app_125m); > + > + return 0; > +} > + > +static const struct phy_ops jh7110_usb2_phy_ops = { > + .init = jh7110_usb2_phy_init, > + .exit = jh7110_usb2_phy_exit, > + .set_mode = jh7110_usb2_phy_set_mode, > + .owner = THIS_MODULE, > +}; > + > +static int jh7110_usb_phy_probe(struct platform_device *pdev) > +{ > + struct jh7110_usb2_phy *phy; > + struct device *dev = &pdev->dev; > + struct phy_provider *phy_provider; > + > + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); > + if (!phy) > + return -ENOMEM; > + > + phy->usb_125m_clk = devm_clk_get(dev, "125m"); > + if (IS_ERR(phy->usb_125m_clk)) > + return dev_err_probe(dev, PTR_ERR(phy->usb_125m_clk), > + "Failed to get 125m clock\n"); > + > + phy->app_125m = devm_clk_get(dev, "app_125m"); > + if (IS_ERR(phy->app_125m)) > + return dev_err_probe(dev, PTR_ERR(phy->app_125m), > + "Failed to get app 125m clock\n"); > + > + phy->regs = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(phy->regs)) > + return dev_err_probe(dev, PTR_ERR(phy->regs), > + "Failed to map phy base\n"); > + > + phy->phy = devm_phy_create(dev, NULL, &jh7110_usb2_phy_ops); > + if (IS_ERR(phy->phy)) > + return dev_err_probe(dev, PTR_ERR(phy->phy), > + "Failed to create phy\n"); > + > + platform_set_drvdata(pdev, phy); > + phy_set_drvdata(phy->phy, phy); > + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); > + > + return PTR_ERR_OR_ZERO(phy_provider); > +} > + > +static int jh7110_usb_phy_remove(struct platform_device *pdev) > +{ > + struct jh7110_usb2_phy *phy = platform_get_drvdata(pdev); > + > + clk_disable_unprepare(phy->app_125m); Why do you need to do clk_disable here? You didn't enable it in probe. > + platform_set_drvdata(pdev, NULL); > + > + return 0; > +} > + > +static const struct of_device_id jh7110_usb_phy_of_match[] = { > + { .compatible = "starfive,jh7110-usb-phy" }, > + { /* sentinel */ }, > +}; > +MODULE_DEVICE_TABLE(of, jh7110_usb_phy_of_match); > + > +static struct platform_driver jh7110_usb_phy_driver = { > + .probe = jh7110_usb_phy_probe, > + .remove = jh7110_usb_phy_remove, > + .driver = { > + .of_match_table = jh7110_usb_phy_of_match, > + .name = "jh7110-usb-phy", > + } > +}; > +module_platform_driver(jh7110_usb_phy_driver); > + > +MODULE_DESCRIPTION("StarFive JH7110 USB 2.0 PHY driver"); > +MODULE_AUTHOR("Minda Chen <minda.chen@starfivetech.com>"); > +MODULE_LICENSE("GPL"); cheers, -roger
On 2023/4/24 16:46, Roger Quadros wrote: > Hi Minda, > > On 20/04/2023 14:00, Minda Chen wrote: >> Add Starfive JH7110 SoC USB 2.0 PHY driver support. >> USB 2.0 PHY default connect to Cadence USB controller. >> >> Signed-off-by: Minda Chen <minda.chen@starfivetech.com> >> --- >> MAINTAINERS | 6 + >> drivers/phy/starfive/Kconfig | 11 ++ >> drivers/phy/starfive/Makefile | 1 + >> drivers/phy/starfive/phy-jh7110-usb.c | 162 ++++++++++++++++++++++++++ >> 4 files changed, 180 insertions(+) >> create mode 100644 drivers/phy/starfive/phy-jh7110-usb.c >> >> diff --git a/MAINTAINERS b/MAINTAINERS >> index 1aef5ba46d71..c09ea66dcd5a 100644 >> --- a/MAINTAINERS >> +++ b/MAINTAINERS >> @@ -19968,6 +19968,12 @@ M: William Qiu <william.qiu@starfivetech.com> >> S: Supported >> F: Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml >> >> +STARFIVE JH71X0 USB PHY DRIVER >> +M: Minda Chen <minda.chen@starfivetech.com> >> +S: Supported >> +F: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml >> +F: drivers/phy/starfive/phy-jh7110-usb.c >> + >> STATIC BRANCH/CALL >> M: Peter Zijlstra <peterz@infradead.org> >> M: Josh Poimboeuf <jpoimboe@kernel.org> >> diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig >> index f989b8ff8bcb..2c013c390dee 100644 >> --- a/drivers/phy/starfive/Kconfig >> +++ b/drivers/phy/starfive/Kconfig >> @@ -11,3 +11,14 @@ config PHY_STARFIVE_DPHY_RX >> Choose this option if you have a StarFive D-PHY in your >> system. If M is selected, the module will be called >> phy-starfive-dphy-rx. >> + >> +config PHY_STARFIVE_JH7110_USB >> + tristate "Starfive JH7110 USB 2.0 PHY support" >> + depends on USB_SUPPORT >> + select GENERIC_PHY >> + select USB_PHY >> + help >> + Enable this to support the StarFive USB 2.0 PHY, >> + used with the Cadence USB controller. >> + If M is selected, the module will be called >> + phy-jh7110-usb.ko. >> diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile >> index 7ec576cb30ae..176443852f4d 100644 >> --- a/drivers/phy/starfive/Makefile >> +++ b/drivers/phy/starfive/Makefile >> @@ -1,2 +1,3 @@ >> # SPDX-License-Identifier: GPL-2.0 >> obj-$(CONFIG_PHY_STARFIVE_DPHY_RX) += phy-starfive-dphy-rx.o >> +obj-$(CONFIG_PHY_STARFIVE_JH7110_USB) += phy-jh7110-usb.o >> diff --git a/drivers/phy/starfive/phy-jh7110-usb.c b/drivers/phy/starfive/phy-jh7110-usb.c >> new file mode 100644 >> index 000000000000..4a12df0692cd >> --- /dev/null >> +++ b/drivers/phy/starfive/phy-jh7110-usb.c >> @@ -0,0 +1,162 @@ >> +// SPDX-License-Identifier: GPL-2.0+ >> +/* >> + * StarFive JH7110 USB 2.0 PHY driver >> + * >> + * Copyright (C) 2023 StarFive Technology Co., Ltd. >> + * Author: Minda Chen <minda.chen@starfivetech.com> >> + */ >> + >> +#include <linux/bits.h> >> +#include <linux/clk.h> >> +#include <linux/err.h> >> +#include <linux/io.h> >> +#include <linux/module.h> >> +#include <linux/phy/phy.h> >> +#include <linux/platform_device.h> >> +#include <linux/usb/of.h> >> + >> +#define USB_125M_CLK_RATE 125000000 >> +#define USB_LS_KEEPALIVE_OFF 0x4 >> +#define USB_LS_KEEPALIVE_ENABLE BIT(4) >> + >> +struct jh7110_usb2_phy { >> + struct phy *phy; >> + void __iomem *regs; >> + struct clk *usb_125m_clk; >> + struct clk *app_125m; >> + enum phy_mode mode; >> +}; >> + >> +static void jh7110_usb2_mode_set(struct jh7110_usb2_phy *phy) >> +{ >> + unsigned int val; >> + >> + if (phy->mode != PHY_MODE_USB_HOST) { >> + /* Enable the LS speed keep-alive signal */ >> + val = readl(phy->regs + USB_LS_KEEPALIVE_OFF); >> + val |= USB_LS_KEEPALIVE_ENABLE; >> + writel(val, phy->regs + USB_LS_KEEPALIVE_OFF); >> + } >> +} >> + >> +static int jh7110_usb2_phy_set_mode(struct phy *_phy, >> + enum phy_mode mode, int submode) >> +{ >> + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy); >> + >> + switch (mode) { >> + case PHY_MODE_USB_HOST: >> + case PHY_MODE_USB_DEVICE: >> + case PHY_MODE_USB_OTG: >> + break; >> + default: >> + return -EINVAL; >> + } >> + >> + if (mode != phy->mode) { >> + dev_info(&_phy->dev, "Changing phy to %d\n", mode); > > dev_dbg() please? > ok, thanks >> + phy->mode = mode; >> + jh7110_usb2_mode_set(phy); >> + } >> + >> + return 0; >> +} >> + >> +static int jh7110_usb2_phy_init(struct phy *_phy) >> +{ >> + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy); >> + int ret; >> + >> + ret = clk_set_rate(phy->usb_125m_clk, USB_125M_CLK_RATE); >> + if (ret) >> + return ret; >> + >> + ret = clk_prepare_enable(phy->app_125m); >> + if (ret) >> + return ret; >> + >> + return 0; >> +} >> + >> +static int jh7110_usb2_phy_exit(struct phy *_phy) >> +{ >> + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy); >> + >> + clk_disable_unprepare(phy->app_125m); >> + >> + return 0; >> +} >> + >> +static const struct phy_ops jh7110_usb2_phy_ops = { >> + .init = jh7110_usb2_phy_init, >> + .exit = jh7110_usb2_phy_exit, >> + .set_mode = jh7110_usb2_phy_set_mode, >> + .owner = THIS_MODULE, >> +}; >> + >> +static int jh7110_usb_phy_probe(struct platform_device *pdev) >> +{ >> + struct jh7110_usb2_phy *phy; >> + struct device *dev = &pdev->dev; >> + struct phy_provider *phy_provider; >> + >> + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); >> + if (!phy) >> + return -ENOMEM; >> + >> + phy->usb_125m_clk = devm_clk_get(dev, "125m"); >> + if (IS_ERR(phy->usb_125m_clk)) >> + return dev_err_probe(dev, PTR_ERR(phy->usb_125m_clk), >> + "Failed to get 125m clock\n"); >> + >> + phy->app_125m = devm_clk_get(dev, "app_125m"); >> + if (IS_ERR(phy->app_125m)) >> + return dev_err_probe(dev, PTR_ERR(phy->app_125m), >> + "Failed to get app 125m clock\n"); >> + >> + phy->regs = devm_platform_ioremap_resource(pdev, 0); >> + if (IS_ERR(phy->regs)) >> + return dev_err_probe(dev, PTR_ERR(phy->regs), >> + "Failed to map phy base\n"); >> + >> + phy->phy = devm_phy_create(dev, NULL, &jh7110_usb2_phy_ops); >> + if (IS_ERR(phy->phy)) >> + return dev_err_probe(dev, PTR_ERR(phy->phy), >> + "Failed to create phy\n"); >> + >> + platform_set_drvdata(pdev, phy); >> + phy_set_drvdata(phy->phy, phy); >> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); >> + >> + return PTR_ERR_OR_ZERO(phy_provider); >> +} >> + >> +static int jh7110_usb_phy_remove(struct platform_device *pdev) >> +{ >> + struct jh7110_usb2_phy *phy = platform_get_drvdata(pdev); >> + >> + clk_disable_unprepare(phy->app_125m); > > Why do you need to do clk_disable here? You didn't enable it in probe. > OK, Just disable clocks in phy exit >> + platform_set_drvdata(pdev, NULL); >> + >> + return 0; >> +} >> + >> +static const struct of_device_id jh7110_usb_phy_of_match[] = { >> + { .compatible = "starfive,jh7110-usb-phy" }, >> + { /* sentinel */ }, >> +}; >> +MODULE_DEVICE_TABLE(of, jh7110_usb_phy_of_match); >> + >> +static struct platform_driver jh7110_usb_phy_driver = { >> + .probe = jh7110_usb_phy_probe, >> + .remove = jh7110_usb_phy_remove, >> + .driver = { >> + .of_match_table = jh7110_usb_phy_of_match, >> + .name = "jh7110-usb-phy", >> + } >> +}; >> +module_platform_driver(jh7110_usb_phy_driver); >> + >> +MODULE_DESCRIPTION("StarFive JH7110 USB 2.0 PHY driver"); >> +MODULE_AUTHOR("Minda Chen <minda.chen@starfivetech.com>"); >> +MODULE_LICENSE("GPL"); > > cheers, > -roger
diff --git a/MAINTAINERS b/MAINTAINERS index 1aef5ba46d71..c09ea66dcd5a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19968,6 +19968,12 @@ M: William Qiu <william.qiu@starfivetech.com> S: Supported F: Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml +STARFIVE JH71X0 USB PHY DRIVER +M: Minda Chen <minda.chen@starfivetech.com> +S: Supported +F: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml +F: drivers/phy/starfive/phy-jh7110-usb.c + STATIC BRANCH/CALL M: Peter Zijlstra <peterz@infradead.org> M: Josh Poimboeuf <jpoimboe@kernel.org> diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig index f989b8ff8bcb..2c013c390dee 100644 --- a/drivers/phy/starfive/Kconfig +++ b/drivers/phy/starfive/Kconfig @@ -11,3 +11,14 @@ config PHY_STARFIVE_DPHY_RX Choose this option if you have a StarFive D-PHY in your system. If M is selected, the module will be called phy-starfive-dphy-rx. + +config PHY_STARFIVE_JH7110_USB + tristate "Starfive JH7110 USB 2.0 PHY support" + depends on USB_SUPPORT + select GENERIC_PHY + select USB_PHY + help + Enable this to support the StarFive USB 2.0 PHY, + used with the Cadence USB controller. + If M is selected, the module will be called + phy-jh7110-usb.ko. diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile index 7ec576cb30ae..176443852f4d 100644 --- a/drivers/phy/starfive/Makefile +++ b/drivers/phy/starfive/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_PHY_STARFIVE_DPHY_RX) += phy-starfive-dphy-rx.o +obj-$(CONFIG_PHY_STARFIVE_JH7110_USB) += phy-jh7110-usb.o diff --git a/drivers/phy/starfive/phy-jh7110-usb.c b/drivers/phy/starfive/phy-jh7110-usb.c new file mode 100644 index 000000000000..4a12df0692cd --- /dev/null +++ b/drivers/phy/starfive/phy-jh7110-usb.c @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * StarFive JH7110 USB 2.0 PHY driver + * + * Copyright (C) 2023 StarFive Technology Co., Ltd. + * Author: Minda Chen <minda.chen@starfivetech.com> + */ + +#include <linux/bits.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/usb/of.h> + +#define USB_125M_CLK_RATE 125000000 +#define USB_LS_KEEPALIVE_OFF 0x4 +#define USB_LS_KEEPALIVE_ENABLE BIT(4) + +struct jh7110_usb2_phy { + struct phy *phy; + void __iomem *regs; + struct clk *usb_125m_clk; + struct clk *app_125m; + enum phy_mode mode; +}; + +static void jh7110_usb2_mode_set(struct jh7110_usb2_phy *phy) +{ + unsigned int val; + + if (phy->mode != PHY_MODE_USB_HOST) { + /* Enable the LS speed keep-alive signal */ + val = readl(phy->regs + USB_LS_KEEPALIVE_OFF); + val |= USB_LS_KEEPALIVE_ENABLE; + writel(val, phy->regs + USB_LS_KEEPALIVE_OFF); + } +} + +static int jh7110_usb2_phy_set_mode(struct phy *_phy, + enum phy_mode mode, int submode) +{ + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy); + + switch (mode) { + case PHY_MODE_USB_HOST: + case PHY_MODE_USB_DEVICE: + case PHY_MODE_USB_OTG: + break; + default: + return -EINVAL; + } + + if (mode != phy->mode) { + dev_info(&_phy->dev, "Changing phy to %d\n", mode); + phy->mode = mode; + jh7110_usb2_mode_set(phy); + } + + return 0; +} + +static int jh7110_usb2_phy_init(struct phy *_phy) +{ + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy); + int ret; + + ret = clk_set_rate(phy->usb_125m_clk, USB_125M_CLK_RATE); + if (ret) + return ret; + + ret = clk_prepare_enable(phy->app_125m); + if (ret) + return ret; + + return 0; +} + +static int jh7110_usb2_phy_exit(struct phy *_phy) +{ + struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy); + + clk_disable_unprepare(phy->app_125m); + + return 0; +} + +static const struct phy_ops jh7110_usb2_phy_ops = { + .init = jh7110_usb2_phy_init, + .exit = jh7110_usb2_phy_exit, + .set_mode = jh7110_usb2_phy_set_mode, + .owner = THIS_MODULE, +}; + +static int jh7110_usb_phy_probe(struct platform_device *pdev) +{ + struct jh7110_usb2_phy *phy; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->usb_125m_clk = devm_clk_get(dev, "125m"); + if (IS_ERR(phy->usb_125m_clk)) + return dev_err_probe(dev, PTR_ERR(phy->usb_125m_clk), + "Failed to get 125m clock\n"); + + phy->app_125m = devm_clk_get(dev, "app_125m"); + if (IS_ERR(phy->app_125m)) + return dev_err_probe(dev, PTR_ERR(phy->app_125m), + "Failed to get app 125m clock\n"); + + phy->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(phy->regs)) + return dev_err_probe(dev, PTR_ERR(phy->regs), + "Failed to map phy base\n"); + + phy->phy = devm_phy_create(dev, NULL, &jh7110_usb2_phy_ops); + if (IS_ERR(phy->phy)) + return dev_err_probe(dev, PTR_ERR(phy->phy), + "Failed to create phy\n"); + + platform_set_drvdata(pdev, phy); + phy_set_drvdata(phy->phy, phy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static int jh7110_usb_phy_remove(struct platform_device *pdev) +{ + struct jh7110_usb2_phy *phy = platform_get_drvdata(pdev); + + clk_disable_unprepare(phy->app_125m); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static const struct of_device_id jh7110_usb_phy_of_match[] = { + { .compatible = "starfive,jh7110-usb-phy" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, jh7110_usb_phy_of_match); + +static struct platform_driver jh7110_usb_phy_driver = { + .probe = jh7110_usb_phy_probe, + .remove = jh7110_usb_phy_remove, + .driver = { + .of_match_table = jh7110_usb_phy_of_match, + .name = "jh7110-usb-phy", + } +}; +module_platform_driver(jh7110_usb_phy_driver); + +MODULE_DESCRIPTION("StarFive JH7110 USB 2.0 PHY driver"); +MODULE_AUTHOR("Minda Chen <minda.chen@starfivetech.com>"); +MODULE_LICENSE("GPL");
Add Starfive JH7110 SoC USB 2.0 PHY driver support. USB 2.0 PHY default connect to Cadence USB controller. Signed-off-by: Minda Chen <minda.chen@starfivetech.com> --- MAINTAINERS | 6 + drivers/phy/starfive/Kconfig | 11 ++ drivers/phy/starfive/Makefile | 1 + drivers/phy/starfive/phy-jh7110-usb.c | 162 ++++++++++++++++++++++++++ 4 files changed, 180 insertions(+) create mode 100644 drivers/phy/starfive/phy-jh7110-usb.c