[v7,4/5] phy: starfive: Add JH7110 PCIE 2.0 PHY driver

Message ID	20230619094759.21013-5-minda.chen@starfivetech.com
State	Superseded
Headers	show Return-Path: <linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org> From: Minda Chen <minda.chen@starfivetech.com> To: Emil Renner Berthing <emil.renner.berthing@canonical.com>, Conor Dooley <conor@kernel.org>, Vinod Koul <vkoul@kernel.org>, Kishon Vijay Abraham I <kishon@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Roger Quadros <rogerq@kernel.org> CC: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-phy@lists.infradead.org>, <linux-riscv@lists.infradead.org>, "Paul Walmsley" <paul.walmsley@sifive.com>, Palmer Dabbelt <palmer@dabbelt.com>, Albert Ou <aou@eecs.berkeley.edu>, Minda Chen <minda.chen@starfivetech.com>, Mason Huo <mason.huo@starfivetech.com> Subject: [PATCH v7 4/5] phy: starfive: Add JH7110 PCIE 2.0 PHY driver Date: Mon, 19 Jun 2023 17:47:58 +0800 Message-ID: <20230619094759.21013-5-minda.chen@starfivetech.com> In-Reply-To: <20230619094759.21013-1-minda.chen@starfivetech.com> References: <20230619094759.21013-1-minda.chen@starfivetech.com> MIME-Version: 1.0 Precedence: list Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-phy" <linux-phy-bounces@lists.infradead.org> Errors-To: linux-phy-bounces+linux-phy=archiver.kernel.org@lists.infradead.org
Series	Add JH7110 USB PHY driver support \| expand [v7,0/7] Add JH7110 USB PHY driver support [v7,1/5] dt-bindings: phy: Add StarFive JH7110 USB PHY [v7,2/5] dt-bindings: phy: Add StarFive JH7110 PCIe PHY [v7,3/5] phy: starfive: Add JH7110 USB 2.0 PHY driver [v7,4/5] phy: starfive: Add JH7110 PCIE 2.0 PHY driver [v7,5/5] riscv: dts: starfive: Add PCIe PHY dts configuration for JH7110

diff --git a/MAINTAINERS b/MAINTAINERS index d2ce89a8d31c..b5d0a9e391bb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20174,10 +20174,12 @@ S: Supported F: Documentation/devicetree/bindings/watchdog/starfive* F: drivers/watchdog/starfive-wdt.c -STARFIVE JH71X0 USB PHY DRIVER +STARFIVE JH71X0 PCIE AND USB PHY DRIVER M: Minda Chen <minda.chen@starfivetech.com> S: Supported +F: Documentation/devicetree/bindings/phy/starfive,jh7110-pcie-phy.yaml F: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml +F: drivers/phy/starfive/phy-jh7110-pcie.c F: drivers/phy/starfive/phy-jh7110-usb.c STATIC BRANCH/CALL diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig index 2283feadfc76..3df2ff654a10 100644 --- a/drivers/phy/starfive/Kconfig +++ b/drivers/phy/starfive/Kconfig @@ -3,6 +3,16 @@ # Phy drivers for StarFive platforms # +config PHY_STARFIVE_JH7110_PCIE + tristate "Starfive JH7110 PCIE 2.0/USB 3.0 PHY support" + select GENERIC_PHY + select USB_PHY + help + Enable this to support the StarFive PCIe 2.0 PHY, + or used as USB 3.0 PHY. + If M is selected, the module will be called + phy-jh7110-pcie.ko. + config PHY_STARFIVE_JH7110_USB tristate "Starfive JH7110 USB 2.0 PHY support" depends on USB_SUPPORT diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile index 52e9a09cc619..1c62d93e3280 100644 --- a/drivers/phy/starfive/Makefile +++ b/drivers/phy/starfive/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_PHY_STARFIVE_JH7110_PCIE) += phy-jh7110-pcie.o obj-$(CONFIG_PHY_STARFIVE_JH7110_USB) += phy-jh7110-usb.o diff --git a/drivers/phy/starfive/phy-jh7110-pcie.c b/drivers/phy/starfive/phy-jh7110-pcie.c new file mode 100644 index 000000000000..cbe79c1f59d3 --- /dev/null +++ b/drivers/phy/starfive/phy-jh7110-pcie.c @@ -0,0 +1,204 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * StarFive JH7110 PCIe 2.0 PHY driver + * + * Copyright (C) 2023 StarFive Technology Co., Ltd. + * Author: Minda Chen <minda.chen@starfivetech.com> + */ + +#include <linux/bits.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mfd/syscon.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define PCIE_KVCO_LEVEL_OFF 0x28 +#define PCIE_USB3_PHY_PLL_CTL_OFF 0x7c +#define PCIE_KVCO_TUNE_SIGNAL_OFF 0x80 +#define PCIE_USB3_PHY_ENABLE BIT(4) +#define PHY_KVCO_FINE_TUNE_LEVEL 0x91 +#define PHY_KVCO_FINE_TUNE_SIGNALS 0xc + +#define USB_PDRSTN_SPLIT BIT(17) + +#define PCIE_PHY_MODE BIT(20) +#define PCIE_PHY_MODE_MASK GENMASK(21, 20) +#define PCIE_USB3_BUS_WIDTH_MASK GENMASK(3, 2) +#define PCIE_USB3_BUS_WIDTH BIT(3) +#define PCIE_USB3_RATE_MASK GENMASK(6, 5) +#define PCIE_USB3_RX_STANDBY_MASK BIT(7) +#define PCIE_USB3_PHY_ENABLE BIT(4) + +struct jh7110_pcie_phy { + struct phy *phy; + struct regmap *stg_syscon; + struct regmap *sys_syscon; + void __iomem *regs; + u32 sys_phy_connect; + u32 stg_pcie_mode; + u32 stg_pcie_usb; + enum phy_mode mode; +}; + +static int phy_usb3_mode_set(struct jh7110_pcie_phy *data) +{ + if (!data->stg_syscon || !data->sys_syscon) { + dev_err(&data->phy->dev, "doesn't support usb3 mode\n"); + return -EINVAL; + } + + regmap_update_bits(data->stg_syscon, data->stg_pcie_mode, + PCIE_PHY_MODE_MASK, PCIE_PHY_MODE); + regmap_update_bits(data->stg_syscon, data->stg_pcie_usb, + PCIE_USB3_BUS_WIDTH_MASK, 0); + regmap_update_bits(data->stg_syscon, data->stg_pcie_usb, + PCIE_USB3_PHY_ENABLE, PCIE_USB3_PHY_ENABLE); + + /* Connect usb 3.0 phy mode */ + regmap_update_bits(data->sys_syscon, data->sys_phy_connect, + USB_PDRSTN_SPLIT, 0); + + /* Configuare spread-spectrum mode: down-spread-spectrum */ + writel(PCIE_USB3_PHY_ENABLE, data->regs + PCIE_USB3_PHY_PLL_CTL_OFF); + + return 0; +} + +static void phy_pcie_mode_set(struct jh7110_pcie_phy *data) +{ + u32 val; + + /* default is PCIe mode */ + if (!data->stg_syscon || !data->sys_syscon) + return; + + regmap_update_bits(data->stg_syscon, data->stg_pcie_mode, + PCIE_PHY_MODE_MASK, 0); + regmap_update_bits(data->stg_syscon, data->stg_pcie_usb, + PCIE_USB3_BUS_WIDTH_MASK, + PCIE_USB3_BUS_WIDTH); + regmap_update_bits(data->stg_syscon, data->stg_pcie_usb, + PCIE_USB3_PHY_ENABLE, 0); + + regmap_update_bits(data->sys_syscon, data->sys_phy_connect, + USB_PDRSTN_SPLIT, 0); + + val = readl(data->regs + PCIE_USB3_PHY_PLL_CTL_OFF); + val &= ~PCIE_USB3_PHY_ENABLE; + writel(val, data->regs + PCIE_USB3_PHY_PLL_CTL_OFF); +} + +static void phy_kvco_gain_set(struct jh7110_pcie_phy *phy) +{ + /* PCIe Multi-PHY PLL KVCO Gain fine tune settings: */ + writel(PHY_KVCO_FINE_TUNE_LEVEL, phy->regs + PCIE_KVCO_LEVEL_OFF); + writel(PHY_KVCO_FINE_TUNE_SIGNALS, phy->regs + PCIE_KVCO_TUNE_SIGNAL_OFF); +} + +static int jh7110_pcie_phy_set_mode(struct phy *_phy, + enum phy_mode mode, int submode) +{ + struct jh7110_pcie_phy *phy = phy_get_drvdata(_phy); + int ret; + + if (mode == phy->mode) + return 0; + + switch (mode) { + case PHY_MODE_USB_HOST: + case PHY_MODE_USB_DEVICE: + case PHY_MODE_USB_OTG: + ret = phy_usb3_mode_set(phy); + if (ret) + return ret; + break; + case PHY_MODE_PCIE: + phy_pcie_mode_set(phy); + break; + default: + return -EINVAL; + } + + dev_dbg(&_phy->dev, "Changing phy mode to %d\n", mode); + phy->mode = mode; + + return 0; +} + +static const struct phy_ops jh7110_pcie_phy_ops = { + .set_mode = jh7110_pcie_phy_set_mode, + .owner = THIS_MODULE, +}; + +static int jh7110_pcie_phy_probe(struct platform_device *pdev) +{ + struct jh7110_pcie_phy *phy; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + u32 args[2]; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(phy->regs)) + return PTR_ERR(phy->regs); + + phy->phy = devm_phy_create(dev, NULL, &jh7110_pcie_phy_ops); + if (IS_ERR(phy->phy)) + return dev_err_probe(dev, PTR_ERR(phy->regs), + "Failed to map phy base\n"); + + phy->sys_syscon = + syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node, + "starfive,sys-syscon", + 1, args); + + if (!IS_ERR_OR_NULL(phy->sys_syscon)) + phy->sys_phy_connect = args[0]; + else + phy->sys_syscon = NULL; + + phy->stg_syscon = + syscon_regmap_lookup_by_phandle_args(pdev->dev.of_node, + "starfive,stg-syscon", + 2, args); + + if (!IS_ERR_OR_NULL(phy->stg_syscon)) { + phy->stg_pcie_mode = args[0]; + phy->stg_pcie_usb = args[1]; + } else { + phy->stg_syscon = NULL; + } + + phy_kvco_gain_set(phy); + + phy_set_drvdata(phy->phy, phy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id jh7110_pcie_phy_of_match[] = { + { .compatible = "starfive,jh7110-pcie-phy" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, jh7110_pcie_phy_of_match); + +static struct platform_driver jh7110_pcie_phy_driver = { + .probe = jh7110_pcie_phy_probe, + .driver = { + .of_match_table = jh7110_pcie_phy_of_match, + .name = "jh7110-pcie-phy", + } +}; +module_platform_driver(jh7110_pcie_phy_driver); + +MODULE_DESCRIPTION("StarFive JH7110 PCIe 2.0 PHY driver"); +MODULE_AUTHOR("Minda Chen <minda.chen@starfivetech.com>"); +MODULE_LICENSE("GPL");

[v7,4/5] phy: starfive: Add JH7110 PCIE 2.0 PHY driver

Commit Message

Comments

Patch