diff mbox series

[02/14] arm64: dts: qcom: ipq6018: Drop PCIE_AUX_CLK from pcie_phy node

Message ID 20240124-pcie-aux-clk-fix-v1-2-d8a4852b6ba6@linaro.org
State Handled Elsewhere
Headers show
Series Drop PCIE_AUX_CLK from the PCIe PHY nodes of Qcom SoCs | expand

Commit Message

Manivannan Sadhasivam Jan. 24, 2024, 7:36 a.m. UTC 
PCIe PHY hw doesn't require PCIE_AUX_CLK for functioning. This clock is
only required by the PCIe controller. Hence drop it from pcie_phy node.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 5e1277fea725..1767e5abd76d 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -283,11 +283,9 @@  pcie_phy: phy@84000 {
 			reg = <0x0 0x00084000 0x0 0x1000>;
 			status = "disabled";
 
-			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
-				<&gcc GCC_PCIE0_AHB_CLK>,
+			clocks = <&gcc GCC_PCIE0_AHB_CLK>,
 				<&gcc GCC_PCIE0_PIPE_CLK>;
-			clock-names = "aux",
-				      "cfg_ahb",
+			clock-names = "cfg_ahb",
 				      "pipe";
 
 			clock-output-names = "gcc_pcie0_pipe_clk_src";