[v2,09/14] scsi: ufs: host: ufs-exynos: add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option

Commit Message

Peter Griffin April 23, 2024, 8:50 p.m. UTC

This option is intended to be set for SoCs that have HCI_V2P1_CTRL
register and can select their tick source via IA_TICK_SEL bit.

Source clock selection for timer tick
0x0 = Bus clock (aclk)
0x1 = Function clock (mclk)

Signed-off-by: Peter Griffin <[e-mail]>
Acked-by: Krzysztof Kozlowski <[e-mail]>
Tested-by: Will McVicker <[e-mail]>
---
 drivers/ufs/host/ufs-exynos.c | 9 +++++++++
 drivers/ufs/host/ufs-exynos.h | 1 +
 2 files changed, 10 insertions(+)

Patch

diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index 66e52c3607e2..66093a905986 100644
--- a/drivers/ufs/host/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -50,6 +50,8 @@ 
 #define HCI_ERR_EN_N_LAYER	0x80
 #define HCI_ERR_EN_T_LAYER	0x84
 #define HCI_ERR_EN_DME_LAYER	0x88
+#define HCI_V2P1_CTRL		0x8C
+#define IA_TICK_SEL		BIT(16)
 #define HCI_CLKSTOP_CTRL	0xB0
 #define REFCLKOUT_STOP		BIT(4)
 #define MPHY_APBCLK_STOP	BIT(3)
@@ -1005,6 +1007,13 @@  static void exynos_ufs_fit_aggr_timeout(struct exynos_ufs *ufs)
 {
 	u32 val;
 
+	/* Select function clock (mclk) for timer tick */
+	if (ufs->opts & EXYNOS_UFS_OPT_TIMER_TICK_SELECT) {
+		val = hci_readl(ufs, HCI_V2P1_CTRL);
+		val |= IA_TICK_SEL;
+		hci_writel(ufs, val, HCI_V2P1_CTRL);
+	}
+
 	val = exynos_ufs_calc_time_cntr(ufs, IATOVAL_NSEC / CNTR_DIV_VAL);
 	hci_writel(ufs, val & CNT_VAL_1US_MASK, HCI_1US_TO_CNT_VAL);
 }
diff --git a/drivers/ufs/host/ufs-exynos.h b/drivers/ufs/host/ufs-exynos.h
index 0fc21b6bbfcd..acf07cc54684 100644
--- a/drivers/ufs/host/ufs-exynos.h
+++ b/drivers/ufs/host/ufs-exynos.h
@@ -222,6 +222,7 @@  struct exynos_ufs {
 #define EXYNOS_UFS_OPT_USE_SW_HIBERN8_TIMER	BIT(4)
 #define EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR	BIT(5)
 #define EXYNOS_UFS_OPT_UFSPR_SECURE		BIT(6)
+#define EXYNOS_UFS_OPT_TIMER_TICK_SELECT	BIT(7)
 };
 
 #define for_each_ufs_rx_lane(ufs, i) \