[v4] phy: mvebu-cp110-utmi: support swapping d+/d- lanes by dts property

Commit Message

Josua Mayer Oct. 2, 2024, 2:04 p.m. UTC

CP11x UTMI PHY supports swapping D+/D- signals via digital control
register 1.

Add support for the "swap-dx-lanes" device-tree property, which lists
the port-ids that should swap D+ and D-.
The property is evaluated in probe and applied before power-on
during mvebu_cp110_utmi_port_setup.

Signed-off-by: Josua Mayer <[e-mail]>
---
Changes in v4:
- rebased on v6.12-rc1
- Link to v3: https://lore.kernel.org/r/[e-mail]

Changes in v3:
- add description for new struct member
  (Reported-by: kernel test robot <[e-mail]>)
- Link to v2: https://lore.kernel.org/r/[e-mail]

Changes in v2:
- fixed compile error introduced with v6.11-rc1:
  parameters of of_property_for_each_u32 were changed from 5 to 3.
  (Reported-by: Vinod Koul <[e-mail]>)
- rebased on v6.11-rc1
- Link to v1: https://lore.kernel.org/r/[e-mail]
---
 drivers/phy/marvell/phy-mvebu-cp110-utmi.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)


---
base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc
change-id: 20240704-mvebu-utmi-phy-84aa3bf3957d

Best regards,

Comments

Vinod Koul Oct. 7, 2024, 3:48 p.m. UTC | #1

On Wed, 02 Oct 2024 17:04:40 +0300, Josua Mayer wrote:
> CP11x UTMI PHY supports swapping D+/D- signals via digital control
> register 1.
> 
> Add support for the "swap-dx-lanes" device-tree property, which lists
> the port-ids that should swap D+ and D-.
> The property is evaluated in probe and applied before power-on
> during mvebu_cp110_utmi_port_setup.
> 
> [...]

Applied, thanks!

[1/1] phy: mvebu-cp110-utmi: support swapping d+/d- lanes by dts property
      commit: d6c496f05e98c6d25ac73f23fd0075913620de56

Best regards,

Patch

diff --git a/drivers/phy/marvell/phy-mvebu-cp110-utmi.c b/drivers/phy/marvell/phy-mvebu-cp110-utmi.c
index 4922a5f3327d..59903f86b13f 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-utmi.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-utmi.c
@@ -62,6 +62,8 @@ 
 #define   SQ_AMP_CAL_MASK			GENMASK(2, 0)
 #define   SQ_AMP_CAL_VAL			1
 #define   SQ_AMP_CAL_EN				BIT(3)
+#define UTMI_DIG_CTRL1_REG			0x20
+#define   SWAP_DPDM				BIT(15)
 #define UTMI_CTRL_STATUS0_REG			0x24
 #define   SUSPENDM				BIT(22)
 #define   TEST_SEL				BIT(25)
@@ -99,11 +101,13 @@  struct mvebu_cp110_utmi {
  * @priv: PHY driver data
  * @id: PHY port ID
  * @dr_mode: PHY connection: USB_DR_MODE_HOST or USB_DR_MODE_PERIPHERAL
+ * @swap_dx: whether to swap d+/d- signals
  */
 struct mvebu_cp110_utmi_port {
 	struct mvebu_cp110_utmi *priv;
 	u32 id;
 	enum usb_dr_mode dr_mode;
+	bool swap_dx;
 };
 
 static void mvebu_cp110_utmi_port_setup(struct mvebu_cp110_utmi_port *port)
@@ -159,6 +163,13 @@  static void mvebu_cp110_utmi_port_setup(struct mvebu_cp110_utmi_port *port)
 	reg &= ~(VDAT_MASK | VSRC_MASK);
 	reg |= (VDAT_VAL << VDAT_OFFSET) | (VSRC_VAL << VSRC_OFFSET);
 	writel(reg, PORT_REGS(port) + UTMI_CHGDTC_CTRL_REG);
+
+	/* Swap D+/D- */
+	reg = readl(PORT_REGS(port) + UTMI_DIG_CTRL1_REG);
+	reg &= ~(SWAP_DPDM);
+	if (port->swap_dx)
+		reg |= SWAP_DPDM;
+	writel(reg, PORT_REGS(port) + UTMI_DIG_CTRL1_REG);
 }
 
 static int mvebu_cp110_utmi_phy_power_off(struct phy *phy)
@@ -286,6 +297,7 @@  static int mvebu_cp110_utmi_phy_probe(struct platform_device *pdev)
 	struct phy_provider *provider;
 	struct device_node *child;
 	u32 usb_devices = 0;
+	u32 swap_dx = 0;
 
 	utmi = devm_kzalloc(dev, sizeof(*utmi), GFP_KERNEL);
 	if (!utmi)
@@ -345,6 +357,10 @@  static int mvebu_cp110_utmi_phy_probe(struct platform_device *pdev)
 			}
 		}
 
+		of_property_for_each_u32(dev->of_node, "swap-dx-lanes", swap_dx)
+			if (swap_dx == port_id)
+				port->swap_dx = 1;
+
 		/* Retrieve PHY capabilities */
 		utmi->ops = &mvebu_cp110_utmi_phy_ops;