@@ -10,6 +10,7 @@
#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,sm8750-rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -1966,6 +1967,168 @@ lpass_lpicx_noc: interconnect@7420000 {
#interconnect-cells = <2>;
};
+ usb_1_hsphy: phy@88e3000 {
+ compatible = "qcom,sm8750-m31-eusb2-phy";
+ reg = <0x0 0x88e3000 0x0 0x29c>;
+
+ clocks = <&tcsrcc TCSR_USB2_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_dp_qmpphy: phy@88e8000 {
+ compatible = "qcom,sm8750-qmp-usb3-dp-phy";
+ reg = <0x0 0x088e8000 0x0 0x4000>;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "usb3_pipe";
+
+ resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+ <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+ reset-names = "phy",
+ "common";
+
+ power-domains = <&gcc GCC_USB3_PHY_GDSC>;
+
+ #clock-cells = <1>;
+ #phy-cells = <1>;
+
+ orientation-switch;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_dp_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_dp_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_ss>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_dp_qmpphy_dp_in: endpoint {
+ };
+ };
+ };
+ };
+
+ usb_1: usb@a6f8800 {
+ compatible = "qcom,sm8750-dwc3", "qcom,dwc3";
+ reg = <0x0 0x0a6f8800 0x0 0x400>;
+ status = "disabled";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&tcsrcc TCSR_USB3_CLKREF_EN>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "xo";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "hs_phy_irq",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
+
+ power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ usb_1_dwc3: usb@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x0a600000 0x0 0xe000>;
+
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&apps_smmu 0x40 0x0>;
+
+ phys = <&usb_1_hsphy>, <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy", "usb3-phy";
+
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,usb2-gadget-lpm-disable;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ snps,is-utmi-l1-suspend;
+ snps,usb3_lpm_capable;
+ snps,usb2-lpm-disable;
+ snps,has-lpm-erratum;
+ tx-fifo-resize;
+
+ dma-coherent;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_dwc3_ss: endpoint {
+ remote-endpoint =
+ <&usb_dp_qmpphy_usb_ss_in>;
+ };
+ };
+ };
+ };
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sm8750-pdc", "qcom,pdc";
reg = <0x0 0x0b220000 0x0 0x10000>, <0x0 0x164400f0 0x0 0x64>;