@@ -3,6 +3,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/en7523-clk.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/reset/airoha,en7581-reset.h>
/ {
@@ -183,6 +184,10 @@ scuclk: clock-controller {
#clock-cells = <1>;
#reset-cells = <1>;
};
+
+ scu_ssr: system-controller {
+ compatible = "airoha,an7581-scu-ssr";
+ };
};
uart1: serial@1fbf0000 {
@@ -200,6 +205,62 @@ rng@1faa1000 {
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
};
+ usb0: usb@1fab0000 {
+ compatible = "mediatek,mtk-xhci";
+ reg = <0x0 0x1fab0000 0x0 0x3e00>,
+ <0x0 0x1fab3e00 0x0 0x100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+
+ phys = <&usb0_u2 PHY_TYPE_USB2>, <&usb0_u3 PHY_TYPE_USB3>;
+
+ status = "disabled";
+ };
+
+ phy@1fac0000 {
+ compatible = "airoha,an7581-usb-phy";
+ reg = <0x0 0x1fac0000 0x0 0x10000>;
+
+ airoha,port-id = <0>;
+ airoha,scu-ssr = <&scu_ssr>;
+
+ usb0_u2: usb2-phy {
+ #phy-cells = <1>;
+ };
+
+ usb0_u3: usb3-phy {
+ #phy-cells = <1>;
+ };
+ };
+
+ usb1: usb@1fad0000 {
+ compatible = "mediatek,mtk-xhci";
+ reg = <0x0 0x1fad0000 0x0 0x3e00>,
+ <0x0 0x1fad3e00 0x0 0x100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+
+ phys = <&usb1_u2 PHY_TYPE_USB2>, <&usb0_u3 PHY_TYPE_USB3>;
+
+ status = "disabled";
+ };
+
+ phy@1fae0000 {
+ compatible = "airoha,an7581-usb-phy";
+ reg = <0x0 0x1fae0000 0x0 0x10000>;
+
+ airoha,port-id = <1>;
+ airoha,scu-ssr = <&scu_ssr>;
+
+ usb1_u2: usb2-phy {
+ #phy-cells = <1>;
+ };
+
+ usb1_u3: usb3-phy {
+ #phy-cells = <1>;
+ };
+ };
+
system-controller@1fbf0200 {
compatible = "airoha,en7581-gpio-sysctl", "syscon",
"simple-mfd";
Add SCU SSR and USB nodes required for USB support of Airoha EN7581. SCU SSR node is required to read and configure the current Serdes mode of the USB PHYs. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- arch/arm64/boot/dts/airoha/en7581.dtsi | 61 ++++++++++++++++++++++++++ 1 file changed, 61 insertions(+)